Download or read book Quality Assurance in the Offshore Oil and Gas Industry written by J. H. Rogerson and published by . This book was released on 1988 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum and Marine Technology Information Guide written by J. Hutcheon and published by CRC Press. This book was released on 2003-09-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1981 as the Offshore Information Guide this guide to information sources has been hailed internationally as an indispensable handbook for the oil, gas and marine industries.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Quality Assurance of Welded Construction written by N T Burgess and published by CRC Press. This book was released on 1989-04-10 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published, most developments in welding construction have been within the quality assurance element of the process rather than in welding technology itself. The continuous pressures from worldwide clients seeking better reliability from welded structures has focused much attention on to quality. The quality characteristic has a significant effect on safety and economy, and the never ending attention to cost effectiveness requires continuous attention to quality control and quality assurance. New materials, faster welding methods and the needs of economic design mean that such objectives must be carefully studied during the planning and execution of welded work. Quality Assurance in Welded Construction covers the essential aspects of the area, and is suitable for civil and structural engineering designers, welding engineers, manufacturing managers, inspectors and QA personnal. Included in the book are features and illustrations relating to defects in welded construction, a summary of essential data, and a substantial amount of information to assistin the task of getting welded structures right first time.
Download or read book The Art of Safety Auditing A Tutorial for Regulators written by Sasho Andonov and published by CRC Press. This book was released on 2019-09-17 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of Safety Auditing: A Tutorial for Regulators provides the theory and practice of auditing safety management systems implemented by the companies in risk industries. With his extensive knowledge and experiences in quality and safety, Sasho Andonov provides the tools to fill the gap in regulatory auditing for safety management systems. The book explains in detail the overall process of auditing with emphasis on practical execution of audits by Safety Regulators in each State or International Organizations. This book presents real examples and outlines every aspect of regulations and oversight audits in high risk industries. FEATURES Offers all theoretical and practical aspects of safety audits Dedicated to regulatory bodies and companies in high risk industries Provides a holistic approach to auditing as part of regulatory oversight activities Discusses most common mistakes during audits and advices how to correct them Excellent tool for auditors and safety managers, but can be utilized in other industries
Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. - Quickly become familiar with the oil and gas offshore industry, including deepwater operations - Understand the full spectrum of the business, including environmental impacts and future challenges - Gain knowledge and exposure on critical standards and real-world case studies
Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 4767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable performance of many systems with which we interact daily has been achieved through the analysis and management of risk. From complex infrastructures to consumer durables, from engineering systems and technologies used in transportation, health, energy, chemical, oil, gas, aerospace, maritime, defence and other sectors, the management of risk during design, manufacture, operation and decommissioning is vital. Methods and models to support risk-informed decision-making are well established but are continually challenged by technology innovations, increasing interdependencies, and changes in societal expectations. Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.
Download or read book Environmental Impact of the Offshore Oil and Gas Industry written by Stanislav Aleksandrovich Patin and published by Ecomonitor Pub.. This book was released on 1999 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides more comprehensive materials and discussion on environmental impact of the offshore oil and gas industry than any other single source currently available. Specifically, multi-disciplinary perspectives are given, addressing worldwide advances in studies, control, and prevention of the industry's impact on the marine environment and its living resources. Unique to this text are the data on environmental aspects of Russian offshore oil and gas developments presented by the leading expert on the problem. The author considers the main impact factors of the offshore activity and outlines conditions providing the balance of interests for the oil industry and fisheries. Special attention is given to the ecotoxicological and biogeochemical characteristics of oil and gas hydrocarbons in the marine environment. Based on all presently available information, specific environmental requirements for discharges and seawater quality are substantiated. Final chap! ters summarize strategic principles of environmental protection and ecological monitoring in relation to the offshore oil and gas activity. Appendix includes Russian standards of Maximum Permissible Concentrations (MPC) and Approximate Safe Impact Limits (ASIL) for about 200 chemicals used in oil and gas production.
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, the environment, and the economy of a region. The book combines introductory sections on failure analysis with numerous real world case studies of pipelines and other types of materials failure in the oil and gas industry, including joint failure, leakage in crude oil storage tanks, failure of glass fibre reinforced epoxy pipes, and failure of stainless steel components in offshore platforms, amongst others. - Introduces readers to modern analytical techniques in materials failure analysis - Combines foundational knowledge with current research on the latest developments and innovations in the field - Includes numerous compelling case studies of materials failure in oil and gas pipelines and drilling platforms
Download or read book Project Management in the Oil and Gas Industry written by Mohamed A. El-Reedy and published by John Wiley & Sons. This book was released on 2016-02-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas projects have special characteristics that need a different technique in project management. The development of any country depends on the development of the energy reserve through investing in oil and gas projects through onshore and offshore exploration, drilling, and increasing facility capacities. Therefore, these projects need a sort of management match with their characteristics, and project management is the main tool to achieving a successful project. Written by a veteran project manager who has specialized in oil and gas projects for years, this book focuses on using practical tools and methods that are widely and successfully used in project management for oil and gas projects. Most engineers study all subjects, but focus on project management in housing projects, administration projects, and commercial buildings or other similar projects. However, oil and gas projects have their own requirements and characteristics in management from the owners, engineering offices, and contractors’ side. Not only useful to graduating engineers, new hires, and students, this volume is also an invaluable addition to any veteran project manager’s library as a reference or a helpful go-to guide. Also meant to be a refresher for practicing engineers, it covers all of the project management subjects from an industrial point of view specifically for petroleum projects, making it the perfect desktop manual. Not just for project managers and students, this book is helpful to any engineering discipline or staff in sharing or applying the work of a petroleum project and is a must-have for anyone working in this industry.
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.
Download or read book Petroleum Abstracts written by and published by . This book was released on 1993-10 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 1986 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Management for the Oil Gas and Process Industries written by Robert Bruce Hey and published by Gulf Professional Publishing. This book was released on 2017-04-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance Management for the Oil, Gas, and Process Industries: A Systems Approach is a practical guide on the business cycle and techniques to undertake step, episodic, and breakthrough improvement in performance to optimize operating costs. Like many industries, the oil, gas, and process industries are coming under increasing pressure to cut costs due to ongoing construction of larger, more integrated units, as well as the application of increasingly stringent environmental policies. Focusing on the 'value adder' or 'revenue generator' core system and the company direction statement, this book describes a systems approach which assures significant sustainable improvements in the business and operational performance specific to the oil, gas, and process industries. The book will enable the reader to: utilize best practice principles of good governance for long term performance enhancement; identify the most significant performance indicators for overall business improvement; apply strategies to ensure that targets are met in agreed upon time frames. - Describes a systems approach which assures significant sustainable improvements in the business and operational performance specific to the oil, gas, and process industries - Helps readers set appropriate and realistic short-term/ long-term targets with a pre-built facility health checker - Elucidates the relationship between PSM, OHS, and Asset Integrity with an increased emphasis on behavior-based safety - Discusses specific oil and gas industry issues and examples such as refinery and gas plant performance initiatives and hydrocarbon accounting
Download or read book Commerce Business Daily written by and published by . This book was released on 1999-05 with total page 1974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1986 with total page 1438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
