EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Practical Quality Management in the Chemical Process Industry

Download or read book Practical Quality Management in the Chemical Process Industry written by Morton E. Bader and published by CRC Press. This book was released on 2020-07-24 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a manual for designing and operating a basic quality management program; a practical discussion of what is needed and how to fulfill those needs on a practical basis. It will be helpful to chemical engineers, plant laboratory managers and those interested in quality management.

Book Risk Assessment and Risk Management for the Chemical Process Industry

Download or read book Risk Assessment and Risk Management for the Chemical Process Industry written by Stone & Webster Engineering Corporation and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tragic incident at Bhopal, India made it clear that safetyreviews for identification and control of accidents involving toxicchemicals must be more systematic. This guide shows how tointegrate hazard identification, risk assessment, consequenceanalysis, and risk mitigation into a formalized program forhandling hazardous chemicals. Most of the 21 contributors aresenior staff members at Stone & Webster EngineeringCorporation. They discuss how to perform and supervise safetystudies for chemical, petrochemical, petroleum refining, and otherfacilities. They discuss all aspects of detection, prevention, andmitigation of risks associated with processing, handling, andproduction of hazardous chemicals. Special attention is given tohazard identification and hazard assessment techniques ranging fromsimple screening checklists to highly structured Hazard andOperability (HAZOP) analysis. You're shown how to calculatepotential consequences of identified hazards, quantify thelikelihood of these events, and combine equipment failure rate dataand human reliability analysis with hazard assessment. You'll alsobenefit from the book's rundowns of how to * apply expert systems and artificial intelligence in riskmanagement * instill safety-oriented operating and maintenanceprocedures * train operators and emergency response personnel * conduct internal and external safety audits * perform chemical dispersion, explosion, and fire analyses * assess health effects from chemical releases * use insurance vehicles to deal with residual risk. Risk Assessment and Risk Management for the Chemical ProcessIndustry is an essential source on minimizing the dangers of toxicincidents and accidents. It is essential reading for safetyengineers, regulatory managers, environmental engineers, and otherprofessionals responsible for safety in chemical plants.

Book Production Management of Chemical Industries

Download or read book Production Management of Chemical Industries written by Kiran R. Golwalkar and published by Springer. This book was released on 2016-02-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all major areas of operation, pollution control, safety, modernization, diversification, and resource management for cost control in the industrial production of chemicals. The author details the importance of obtaining the right type of raw materials and equipment for maximum plant efficiency and discusses revival of plants that have been idle for long periods. He also presents important issues concerning product quality, energy recovery, safety, pollution control and improving profitability by proper management of resources. The book is ideal for shop floor engineers, middle level management, and owners of small- and medium-scale facilities in many countries as it serves as a guide for keeping the plant operations running in adverse situations, for reducing energy consumption; improving profitability, resource allocation, and workforce planning.

Book Quality Assurance for the Chemical and Process Industries

Download or read book Quality Assurance for the Chemical and Process Industries written by American Society for Quality. Chemical Interest Committee and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: By approaching quality practices from a process industry viewpoint, Quality Assurance for the Chemical and Process Industries, has been a favorite guide for process engineers, quality professionals, manufacturing managers, as well as any customers of the chemical and process industries. This second edition has been updated to be consistent with the 1994 ANSI/ISO/ASQC Q9000 revisions and other easy-to-read developments in quality practice since its original release. Also new to this edition is information on customer service and product performance, technician training, and packaged material distributor requirements. Process improvement techniques, auditing customs, and record retention help make this an outstanding resource for anyone working with, or interested in, this technically challenging environment.

Book Project Management for the Process Industries

Download or read book Project Management for the Process Industries written by Gillian Lawson and published by IChemE. This book was released on 1999 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry is dependent on projects to develop new and improved products and processes for producing them, necessitating the need for them to be completed right first time and on time. Objectives, safety, environmental awareness, quality, cost and speed are all things which need to be considered when implementing a project, which is why process plants have project managers/engineers. This book is aimed at everyone who has responsibilities for some or all of a project, giving a better understanding of the subject. It describes best practice and offers guidance on how principles and techniques can be applied to all aspects of a projects. This information is presented in chapters arranged in three sections: phases of a project; tools and techniques relevant at every stage; and skills and knowledge required by the project manager.

Book Chemical Process Industries

Download or read book Chemical Process Industries written by Randolph Norris Shreve and published by . This book was released on 1967 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Quality Assurance of Chemical Measurements

Download or read book Quality Assurance of Chemical Measurements written by John K. Taylor and published by Routledge. This book was released on 2020-12-18 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive new book should appeal to everyone who produces, uses, or evaluates scientific data. Ensures accuracy and reliability. Dr. Taylor's book provides guidance for the development and implementation of a credible quality assurance program, plus it also provides chemists and clinical chemists, medical and chemical researchers, and all scientists and managers the ideal means to ensure accurate and reliable work. Chapters are presented in a logical progression, starting with the concept of quality assurance, principles of good measurement, principles of quality assurance, and evaluation of measurement quality. Each chapter has a degree of independence so that it may be consulted separately from the others.

Book Mass Production Processes

Download or read book Mass Production Processes written by Anil Akdogan and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Book Guidance for quality assurance project plans

Download or read book Guidance for quality assurance project plans written by and published by DIANE Publishing. This book was released on with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Bow Ties in Risk Management

Download or read book Bow Ties in Risk Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-10-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN AUTHORITATIVE GUIDE THAT EXPLAINS THE EFFECTIVENESS AND IMPLEMENTATION OF BOW TIE ANALYSIS, A QUALITATIVE RISK ASSESSMENT AND BARRIER MANAGEMENT METHODOLOGY From a collaborative effort of the Center for Chemical Process Safety (CCPS) and the Energy Institute (EI) comes an invaluable book that puts the focus on a specific qualitative risk management methodology – bow tie barrier analysis. The book contains practical advice for conducting an effective bow tie analysis and offers guidance for creating bow tie diagrams for process safety and risk management. Bow Ties in Risk Management clearly shows how bow tie analysis and diagrams fit into an overall process safety and risk management framework. Implementing the methods outlined in this book will improve the quality of bow tie analysis and bow tie diagrams across an organization and the industry. This important guide: Explains the proven concept of bow tie barrier analysis for the preventing and mitigation of incident pathways, especially related to major accidents Shows how to avoid common pitfalls and is filled with real-world examples Explains the practical application of the bow tie method throughout an organization Reveals how to treat human and organizational factors in a sound and practical manner Includes additional material available online Although this book is written primarily for anyone involved with or responsible for managing process safety risks, this book is applicable to anyone using bow tie risk management practices in other safety and environmental or Enterprise Risk Management applications. It is designed for a wide audience, from beginners with little to no background in barrier management, to experienced professionals who may already be familiar with bow ties, their elements, the methodology, and their relation to risk management. The missions of both the CCPS and EI include developing and disseminating knowledge, skills, and good practices to protect people, property and the environment by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 30 years. The EI's Technical Work Program addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.

Book Guidelines for Risk Based Process Safety

Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.

Book Official Gazette

    Book Details:
  • Author : Philippines
  • Publisher :
  • Release : 2007
  • ISBN :
  • Pages : 618 pages

Download or read book Official Gazette written by Philippines and published by . This book was released on 2007 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Process Engineering and Industrial Management

Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.

Book Industrial Chemical Process Design  2nd Edition

Download or read book Industrial Chemical Process Design 2nd Edition written by Douglas Erwin and published by McGraw Hill Professional. This book was released on 2014 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a hands-on industry consultant and featuring more than 200 illustrations,

Book Chemical Process Industries

Download or read book Chemical Process Industries written by Louis Theodore and published by CRC Press. This book was released on 2022-12-30 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth and expansion of the chemical process industry during the past century have been accompanied by a simultaneous rise in human health problems as well as material and property losses because of fires, explosions, hazardous and toxic spills, equipment failures, other accidents, and business interruptions. Concern over the potential consequences of emissions of harmful chemicals (along with catastrophic accidents) has sparked interest at both the industrial and regulatory levels in obtaining a better understanding of the potential for environmental health risks in chemical and related industries. This practical book presents and examines the environmental and health risk assessment calculations as they apply to various chemical process industries. Chemical Process Industries: Environmental and Health Risk Calculations can be used as a college text designed to provide new engineers and scientists some comprehension of the industries into which they may enter. It also serves as a useful reference for practitioners and will help them better understand the health risk aspects of various industrial operations. The chemical process industries employ mechanical, electrical, and civil engineers and a host of other scientists; these professions should also benefit from material in this book that applies to their fields of work.

Book Production Control in the Process Industry

Download or read book Production Control in the Process Industry written by E. O'shima and published by Elsevier. This book was released on 2014-07-04 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers within this volume reflect the multidisciplinary approach taken by the workshop to the development and improvement of existing production control theories and practices as applied to the process industry. Subjects covered include production planning, quality control and assurance, operational control and maintenance strategy. The development of this area is seen by those at the workshop as only being achieved by various groups working together rather than in isolation, so that the overall aim of production control is not lost in too much detail. This volume will provide the reader with essential information on new initiatives in the process industry with regard to production control.

Book Lees  Loss Prevention in the Process Industries

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field