Download or read book Quagga OSPF written by Noite.pl and published by NOITE S.C.. This book was released on with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: OSPF – smart routing protocol and it is quite Open. The micro-course presents the rules of the OSPF protocol configuration on the basis of the Quagga program. Keywords: Quagga, ospf, hello, multipath routing, routing protocol, routing table, IGP, internal gateway, ospfd Quagga - OSPF OSPF protocol Configuration of OSPF with the use of Quagga

Download or read book Internet Routing with BGP written by Iljitsch van Beijnum and published by Iljitsch van Beijnum. This book was released on 2022-10-21 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internet is “a network of networks”. It’s made up of tens of thousands of largely independent networks, but somehow the users of one network can communicate with the users of any of the other networks. The Border Gateway Protocol (BGP) is the glue that binds these disparate networks together. BGP is a routing protocol: its main job is to allow each network to learn which ranges of IP addresses are used where, so packets can flow along the correct route. However, BGP has a more difficult job to do than other routing protocols. Yes, it has to make the packets reach their destination, but BGP also has to pay attention to the business side: those packets only get to flow over a network link if either the sender or the receiver pays for the privilege. This book covers the fundamentals of the technical side of BGP, and also looks at the intersection between the technical and business aspects of internet routing. The book contains 40 configuration examples that readers can try out on their own computer in a “BGP minilab”.

Download or read book The quagga packet written by Noite.pl and published by NOITE S.C.. This book was released on with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quagga – the most powerful tool in the world of routing. A description of the Quagga packet used for managing the configuration of dynamic routing protocols. Te micro-course discusses the structure and rules of configuration and management of this application. Keywords: Quagga, RIPv1, RIPv2, OSPF, BGP, RIP, routing protocol, dynamic routing, routing table, ospfd, ripd The quagga packet Installation Basic commands Configuration files Configuration files – syntax Example configuration file Selected commands of the vty terminal Working with the virtual terminal (VTY) Simplifications during work with the Quagga packet Interface modes Configuration of a daemon VTYSH Zebra daemon Static routing configuration commands

Download or read book Linux Smart Homes For Dummies written by Neil Cherry and published by John Wiley & Sons. This book was released on 2006-07-14 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Linux smart home is about controlling and monitoring devices and information around your home using a standard personal computer, Linux, and its vast array of open source tools. You don’t have to be a master programmer to create one. If you like to tinker with Linux, Linux Smart Homes For Dummies will guide you through cool home automation projects that are as much fun to work on as they are to use. Home automation used to be limited to turning on lights and appliances, and maybe controlling your thermostat and lawn sprinkler, from your computer. While you still might not be able to create all the Jetsons’ toys, today you can also Build a wireless network Create and set up a weather station Automate your TV and sound system Spy on your pets when you’re not home Set up an answering system that knows what to do with calls Increase your home’s security If you know how to use Linux and a few basic development tools — Perl, the BASH shell, development libraries, and the GNU C compiler—Linux Smart Homes For Dummies will help you do all these tricks and more. For example, you can Discover the best sources for Linux-based home automation devices Set up a wireless network, create a wireless access point, build a bridge between wired and wireless networks, and route your own network traffic Build a personal video recorder with MythTV that will record to DVD, or set up a wireless streaming music system Create a smart phone system that takes messages and forwards them to your fax, modem, or answering machine Build a weather station that notifies you of severe weather alerts Control and secure your home automation network, and even check on your house when you’re away The bonus CD-ROM includes all kinds of cool open source software for your home automation projects. Linux Smart Homes For Dummies even includes lists of cool gadgets to check out and great ways to automate those boring household chores. A smart home’s a happy home!

Download or read book Network Infrastructure Security written by Angus Wong and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on Internet security over the past few decades has focused mainly on information assurance, issues of data confidentiality and integrity as explored through cryptograph algorithms, digital signature, authentication code, etc. Unlike other books on network information security, Network Infrastructure Security addresses the emerging concern with better detecting and preventing routers and other network devices from being attacked or compromised. Network Infrastructure Security bridges the gap between the study of the traffic flow of networks and the study of the actual network configuration. This book makes effective use of examples and figures to illustrate network infrastructure attacks from a theoretical point of view. The book includes conceptual examples that show how network attacks can be run, along with appropriate countermeasures and solutions.

Download or read book IPv6 in Practice written by Benedikt Stockebrand and published by Springer Science & Business Media. This book was released on 2006-11-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to IPv6 addressing Unix and network administrators with experience in TCP/IP(v4) but not necessarily any IPv6 knowledge. It focuses on reliable and efficient operation of IPv6 implementations available today rather than on protocol specifications. Consequently, it covers the essential concepts, using instructive and thoroughly tested examples, on how to configure, administrate, and debug IPv6 setups. These foundations are complemented by discussions of best practices and strategic considerations aimed at overall efficiency, reliability, maintainability, and interoperation.

Download or read book Computational Collective Intelligence written by Ngoc Thanh Nguyen and published by Springer. This book was released on 2018-08-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set (LNAI 11055 and LNAI 11056) constitutes the refereed proceedings of the 10th International Conference on Collective Intelligence, ICCCI 2018, held in Bristol, UK, in September 2018 The 98 full papers presented were carefully reviewed and selected from 240 submissions. The conference focuses on knowledge engineering and semantic web, social network analysis, recommendation methods and recommender systems, agents and multi-agent systems, text processing and information retrieval, data mining methods and applications, decision support and control systems, sensor networks and internet of things, as well as computer vision techniques.

Download or read book Pro Puppet written by Spencer Krum and published by Apress. This book was released on 2014-01-25 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pro Puppet, Second Edition, now updated for Puppet 3, is an in-depth guide to installing, using, and developing the popular configuration management tool Puppet. Puppet provides a way to automate everything from user management to server configuration. You'll learn how Puppet has changed in the latest version, how to use it on a variety of platforms, including Windows, how to work with Puppet modules, and how to use Hiera. Puppet is a must-have tool for system administrators, and Pro Puppet will teach you how to maximize its capabilities and customize it for your environment. Install and configure Puppet to immediately start automating tasks and create reporting solutions Learn insider tricks and techniques to better manage your infrastructure Become a Puppet expert!

Download or read book Mastering pfSense written by David Zientara and published by Packt Publishing Ltd. This book was released on 2018-05-09 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Install and configure a pfSense router/firewall, and become a pfSense expert in the process. Key Features You can always do more to secure your software – so extend and customize your pfSense firewall Build a high availability security system that’s fault-tolerant – and capable of blocking potential threats Put the principles of better security into practice by implementing examples provided in the text Book Description pfSense has the same reliability and stability as even the most popular commercial firewall offerings on the market – but, like the very best open-source software, it doesn’t limit you. You’re in control – you can exploit and customize pfSense around your security needs. Mastering pfSense - Second Edition, covers features that have long been part of pfSense such as captive portal, VLANs, traffic shaping, VPNs, load balancing, Common Address Redundancy Protocol (CARP), multi-WAN, and routing. It also covers features that have been added with the release of 2.4, such as support for ZFS partitions and OpenVPN 2.4. This book takes into account the fact that, in order to support increased cryptographic loads, pfSense version 2.5 will require a CPU that supports AES-NI. The second edition of this book places more of an emphasis on the practical side of utilizing pfSense than the previous edition, and, as a result, more examples are provided which show in step-by-step fashion how to implement many features. What you will learn Configure pfSense services such as DHCP, Dynamic DNS, captive portal, DNS, NTP and SNMP Set up a managed switch to work with VLANs Use pfSense to allow, block and deny traffic, and to implement Network Address Translation (NAT) Make use of the traffic shaper to lower and raise the priority of certain types of traffic Set up and connect to a VPN tunnel with pfSense Incorporate redundancy and high availability by utilizing load balancing and the Common Address Redundancy Protocol (CARP) Explore diagnostic tools in pfSense to solve network problems Who this book is for This book is for those with at least an intermediate understanding of networking. Prior knowledge of pfSense would be helpful but is not required. Those who have the resources to set up a pfSense firewall, either in a real or virtual environment, will especially benefit, as they will be able to follow along with the examples in the book.

Download or read book Testbeds and Research Infrastructures Development of Networks and Communities written by Thomas Magedanz and published by Springer. This book was released on 2010-12-02 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 6th International ICST Conference, TridentCom 2010, held in Berlin, Germany, in May 2010. Out of more than 100 submitted contributions the Program Committee finally selected 15 full papers, 26 practices papers, and 22 posters. They focus on topics as Internet testbeds, future Internet research, wireless sensors, media and mobility, and monitoring in large scale testbeds.

Download or read book Computer Networks and the Internet written by Gerry Howser and published by Springer Nature. This book was released on 2019-12-23 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this textbook is to provide enough background into the inner workings of the Internet to allow a novice to understand how the various protocols on the Internet work together to accomplish simple tasks, such as a search. By building an Internet with all the various services a person uses every day, one will gain an appreciation not only of the work that goes on unseen, but also of the choices made by designers to make life easier for the user. Each chapter consists of background information on a specific topic or Internet service, and where appropriate a final section on how to configure a Raspberry Pi to provide that service. While mainly meant as an undergraduate textbook for a course on networking or Internet protocols and services, it can also be used by anyone interested in the Internet as a step–by–step guide to building one's own Intranet, or as a reference guide as to how things work on the global Internet

Download or read book Information Centric Networks ICN written by Nitul Dutta and published by Springer Nature. This book was released on 2021-08-27 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aimed at bringing an insight to the ICN network, particularly various architectures, issues and challenges in the new networking paradigm. The book starts with an introduction to the new promising concept of ICN and its origin along with the reason behind this interesting innovation. Different architectures proposed so far in support of implementing the ICN is also discussed in details. Few of the challenges of ICN implementation are enlisted as caching, naming, routing, and security. Each of these challenges with recent development is covered in individual chapters. Moreover, integration of current trends in communication and computing like software defined networking and machine learning approach are another area that this book is focusing. All these chapters highlight the recent developments reported in the area and also discusses the future trends. The book provides an overview of the recent developments in future internet technologies, bringing together the advancements that have been made in ICN. The book includes three unique chapters in the field of ICN research. The first, is the SDN framework for implementing ICN by decoupling data and control plan. The machine learning models for predicting future trends in network traffic and other management activities is another important chapter. This chapter includes the possibilities of using machine learning models for trend prediction to help network administrators and service providers to take care of unexpected sudden change traffic pattern and user behaviour. The third most vital chapter is the security issues in ICN. This chapter includes various facts that influences the security of ICN. Issues involved in naming, caching and routing are discussed separately along with few recent works in these areas. Various types of attacks in ICN are also part of the discussion. The stated book would be useful for researchers in this area and will work as a reference for future work. Moreover, the content of the book would also be suitable as a supporting material for undergraduate and graduate level courses in computer science and electrical engineering.

Download or read book DNS Security Management written by Michael Dooley and published by John Wiley & Sons. This book was released on 2017-08-14 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced Domain Name System (DNS) security resource that explores the operation of DNS, its vulnerabilities, basic security approaches, and mitigation strategies DNS Security Management offers an overall role-based security approach and discusses the various threats to the Domain Name Systems (DNS). This vital resource is filled with proven strategies for detecting and mitigating these all too frequent threats. The authors—noted experts on the topic—offer an introduction to the role of DNS and explore the operation of DNS. They cover a myriad of DNS vulnerabilities and include preventative strategies that can be implemented. Comprehensive in scope, the text shows how to secure DNS resolution with the Domain Name System Security Extensions (DNSSEC). In addition, the text includes discussions on security applications facility by DNS, such as anti-spam, SPF, DANE and related CERT/SSHFP records. This important resource: Presents security approaches for the various types of DNS deployments by role (e.g., recursive vs. authoritative) Discusses DNS resolvers including host access protections, DHCP configurations and DNS recursive server IPs Examines DNS data collection, data analytics, and detection strategies With cyber attacks ever on the rise worldwide, DNS Security Management offers network engineers a much-needed resource that provides a clear understanding of the threats to networks in order to mitigate the risks and assess the strategies to defend against threats.

Download or read book IP Address Management written by Timothy Rooney and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rediscover fundamental and advanced topics in IPAM, DNS, DHCP and other core networking technologies with this updated one-stop reference The thoroughly revised second edition of IP Address Management is the definitive reference for working with core IP management technologies, like address allocation, assignment, and network navigation via DNS. Accomplished professionals and authors Timothy Rooney and Michael Dooley offer readers coverage of recent IPAM developments in the world of cloud computing, Internet of Things (IoT), and security, as well as a comprehensive treatment of foundational concepts in IPAM. The new edition addresses the way that IPAM needs and methods have evolved since the publication of the first edition. The book covers the impact of mainstream use of private and public cloud services, the maturation of IPv6 implementations, new DNS security approaches, and the proliferation of IoT devices. The authors have also reorganized the flow of the book, with much of the technical reference material appearing at the end and making for a smoother and simpler reading experience. The 2nd edition of IP Address Management also covers topics like such as: Discussions about the fundamentals of Internet Protocol Address Management (IPAM), including IP addressing, address allocation and assignment, DHCP, and DNS An examination of IPAM practices, including core processes and tasks, deployment strategies, IPAM security best-practices, and DNS security approaches A treatment of IPAM in the modern context, including how to adapt to cloud computing, the Internet of Things, IPv6, and new trends in IPAM A one-stop reference for IPAM topics, including IP addressing, DHCP, DNS, IPv6, and DNS security Perfect for IP network engineers and managers, network planners, network architects, and security engineers, the second edition of IP Address Management also belongs on the bookshelves of senior undergraduate and graduate students studying in networking, information technology, and computer security-related courses and programs.

Download or read book EUNICE 2005 Networks and Applications Towards a Ubiquitously Connected World written by Carlos Delgado Kloos and published by Springer. This book was released on 2006-06-07 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected proceedings from the EUNICE Summer School which took place in Colmenarejo in July of 2005. The book explores the theme of Networked Applications in depth. It covers topics of advanced engineering such as ubiquitous computing, full mobility and real-time multimedia, into real services, applications, protocols and networks.

Download or read book Software Defined Networks written by Paul Goransson and published by Morgan Kaufmann. This book was released on 2016-10-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Defined Networks: A Comprehensive Approach, Second Edition provides in-depth coverage of the technologies collectively known as Software Defined Networking (SDN). The book shows how to explain to business decision-makers the benefits and risks in shifting parts of a network to the SDN model, when to integrate SDN technologies in a network, and how to develop or acquire SDN applications. In addition, the book emphasizes the parts of the technology that encourage opening up the network, providing treatment for alternative approaches to SDN that expand the definition of SDN as networking vendors adopt traits of SDN to their existing solutions. Since the first edition was published, the SDN market has matured, and is being gradually integrated and morphed into something more compatible with mainstream networking vendors. This book reflects these changes, with coverage of the OpenDaylight controller and its support for multiple southbound protocols, the Inclusion of NETCONF in discussions on controllers and devices, expanded coverage of NFV, and updated coverage of the latest approved version (1.5.1) of the OpenFlow specification. - Contains expanded coverage of controllers - Includes a new chapter on NETCONF and SDN - Presents expanded coverage of SDN in optical networks - Provides support materials for use in computer networking courses

Download or read book Learning OpenDaylight written by Reza Toghraee and published by Packt Publishing Ltd. This book was released on 2017-05-29 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to building programmable networks using OpenDaylight About This Book Learn and understand how SDN controllers operate and integrate with networks; this book's step-by-step tutorials will give you a strong foundation in SDN, NVF, and OpenDayLight. Learn how to map legacy Layer 2/3 networking technologies in the SDN world Add new services and capabilities to your infrastructure and quickly adopt SDN and NFV within your organization with OpenDayLight. Integrate and manage software-defined networks efficiently in your organization. Build innovative network applications with OpenDayLight and save time and resources. Who This Book Is For This book targets network engineers, network programmers and developers, administrators, and anyone with some level of networking experience who'd like to deploy OpenDayLight effectively. Familiarity with the day-to-day operations of computer networks is expected What You Will Learn Transition from legacy networking to software-defined networking Learn how SDN controllers work and manage a network using southbound and northbound APIs Learn how to deploy the OpenDayLight SDN controller and integrate it with virtual switches Understand the basic design and operation of the OpenDaylight platform Build simple MD-SAL OpenDaylight applications Build applications on top of OpenDayLight to trigger network changes based on different events Integrate OpenStack with OpenDayLight to build a fully managed network Learn how to build a software-defined datacenter using NFV and service-chaining technologies In Detail OpenDaylight is an open source, software-defined network controller based on standard protocols. It aims to accelerate the adoption of Software-Defined Networking (SDN) and create a solid foundation for Network Functions Virtualization (NFV). SDN is a vast subject; many network engineers find it difficult to get started with using and operating different SDN platforms. This book will give you a practical bridge from SDN theory to the practical, real-world use of SDN in datacenters and by cloud providers. The book will help you understand the features and use cases for SDN, NFV, and OpenDaylight. NFV uses virtualization concepts and techniques to create virtual classes for node functions. Used together, SDN and NFV can elevate the standards of your network architecture; generic hardware-saving costs and the advanced and abstracted software will give you the freedom to evolve your network in the future without having to invest more in costly equipment. By the end of this book, you will have learned how to design and deploy OpenDaylight networks and integrate them with physical network switches. You will also have mastered basic network programming over the SDN fabric. Style and approach This is a step-by-step tutorial aimed at getting you up-to-speed with OpenDayLight and ready to adopt it for your SDN (Software-Defined Networking) and NFV (Network Functions Virtualization) ecosystem.