Download or read book QC T 755 2020 Translated English of Chinese Standard QCT755 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-07-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Document specifies the terms and definitions of automobile fuel-gas systems that use liquefied natural gas (hereinafter referred to as LNG) fuel, the composition and technical requirements of fuel-gas system of LNG vehicles, as well as the specific requirements for gas storage components, gas supply components, refuelling components and safety components.

Download or read book QC T 755 2006 Translated English of Chinese Standard QCT 755 2006 QC T755 2006 QCT755 2006 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-06-13 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the technical requirements of special equipment for LNG vehicle. This Standard is applicable to mono-LNG vehicle of which the LNG nominal working pressure is not more than 1.6MPa.

Download or read book QC T 1137 2020 Translated English of Chinese Standard QCT1137 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-07-30 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Document specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of encapsulated glazing for road vehicles. This Document is applicable to encapsulated glazing for road vehicles produced by injection molding process. This Document is not applicable to encapsulated glazing for road vehicles produced by the tape bonding process.

Download or read book QC T 770 2020 Translated English of Chinese Standard QCT770 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-06-30 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage of dry-type air cleaner assemblies of automobiles. This document applies to dry-type air cleaner assemblies of automobiles (excluding passenger cars), which have a volume flow of less than 4000 m3/h. For the dry air cleaners for construction machinery, agricultural and forestry machinery, ships and stationary power, they may also refer to this document.

Download or read book QC T 1139 2020 Translated English of Chinese Standard QCT1139 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-07-30 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Document specifies the terms and definitions, process requirements, performance requirements, test methods, inspection rules, markings, packaging, transportation and storage of remanufactured products of automobile engine connecting rods. This Document is applicable to remanufactured products of automobile engine connecting rods.

Download or read book QC T 1141 2020 Translated English of Chinese Standard QCT1141 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-06-30 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the technical requirements and bench test methods for automotive clutch release bearing assembly. This document is applicable to automotive mechanically and hydraulically controlled clutch release bearing assembly.

Download or read book QC T 1140 2020 Translated English of Chinese Standard QCT1140 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-06-30 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the terms and definitions, process requirements, performance requirements, test methods, inspection rules, marking, packaging, transportation, and storage for the remanufactured products of automotive engine crankshaft. This document is applicable to remanufactured products of automotive engine crankshafts.

Download or read book QC T 1138 2020 Translated English of Chinese Standard QCT1138 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-07-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Document specifies the terms and definitions, classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of sliding glass assembly for road vehicles. This Document is applicable to sliding window glazing assembly for road vehicles with openings in fixed glass.

Download or read book GB T 39102 2020 Translated English of Chinese Standard GBT 39102 2020 GB T39102 2020 GBT39102 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-03-20 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard provides the general principles in the design and manufacture of customized consumer products, and the guidelines for manufacture quality control in the demand determination, design, management and control of raw and auxiliary materials, manufacturing, pre-delivery inspection, packaging, transportation and delivery process. This Standard is applicable to the quality control of customized consumer products in the design and manufacturing stage.

Download or read book QC T 794 2020 Translated English of Chinese Standard QC T 794 2020 QCT794 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-27 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the terms and definitions, classification, requirements, test methods, inspection rules and marking, packaging, transportation, storage of internal-combustion engine industry filter paper (hereinafter referred to as filter paper). This document applies to filter paper for internal combustion engine filters.

Download or read book GB T 38475 2020 Translated English of Chinese Standard GB T 38475 2020 GBT38475 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-09-30 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method for the detection of mycotoxins in natural pigment products by rapid quantitative method of colloidal gold strip test. This Standard is applicable to the rapid quantitative detection of aflatoxin B1, citrinin, zearalenone and vomitoxin in natural pigment products based on natural product extraction and fermentation.

Download or read book GB T 15675 2020 Translated English of Chinese Standard GBT 15675 2020 GB T15675 2020 GBT15675 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-04-04 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, designation expression method, classification and code, size, shape, weight, technical requirements, test methods, inspection rules, packaging, marks and quality certificates for continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip. This Standard is applicable to electrolytically zinc/zinc-nickel alloy coated steel sheet and strip used in automobiles, home appliances, electronics and other industries.

Download or read book GB T 4156 2020 Translated English of Chinese Standard GBT 4156 2020 GB T4156 2020 GBT4156 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-05-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the method for determining the ability of metal sheets and strips to withstand plastic deformation during drawing forming by the Erichsen Cupping Test. This Standard is applicable to the determination of metal sheets and strips with a thickness of 0.1mm~2.0mm and a width of no less than 90mm. For thicker sheets and strips or those that only the narrower specimen may be taken, then use the mold with specified size; and the subscript shall be used when indicating the results. See Table 1.

Download or read book GB T 6885 2020 Translated English of Chinese Standard GBT 6885 2020 GB T6885 2020 GBT6885 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies mixed powder sampling, test piece preparation and test methods for determining the properties of hardmetals by sintering test pieces. This Standard is applicable to the sampling and test methods of mixed powder of hardmetals.

Download or read book GB T 38910 2020 Translated English of Chinese Standard GBT 38910 2020 GB T38910 2020 GBT38910 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-10-16 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies marking requirements, equipment and materials, durability marking test method, non-durability marking test method, test result and test report of test method of the marking of sanitary wares. This Standard is applicable to the test of the marking of sanitary wares.

Download or read book GB T 7996 2020 Translated English of Chinese Standard GBT 7996 2020 GB T7996 2020 GBT7996 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-22 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the nominal capacity and diameter of glass-lined equipment. This Standard applies to glass-lined equipment.

Download or read book GB T 2272 2020 Translated English of Chinese Standard GBT 2272 2020 GB T2272 2020 GBT2272 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-09-26 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the notations for designation, technical requirements, test methods, inspection rules, judgment and re-inspection, packaging, storage and transportation, marking and quality certificates of ferrosilicon. This Standard is applicable ferrosilicon serving as deoxidizer and alloying agent in the iron and steel industry; ferrosilicon serving as inoculant and nodulizer in the foundry industry; and ferrosilicon serving as reducing agent in the magnesium industry and ferroalloy industry.