Download or read book Q Band Monolithic GaAs PHEMT Low Noise Amplifiers Comparative Study of Depletion and Enhancement Mode Transistors written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Two Q-band monolithic low noise amplifiers have been designed and characterized. A study about depletion and enhancement mode HEMTs with the same technology has been performed in order to apply these results to the design of the low noise amplifiers. These circuits have been developed for being used in the Back End module of the radiometers in the European Scientific mission Planck, because there are not commercial circuits available in this frequency band. The main goals for these amplifiers are low noise with a small DC consumption. A minimum noise figure of 2.8 dB with an associated gain of 23.1 dB at 40.4 GHz has been measured for the E-HEMT MMIC LNA and its DC current consumption was 15.4 mA. The D-HEMT MMIC LNA has a minimum noise figure of 3 dB with an associated gain of 23.2 dB at 42 GHz and 30 mA of DC current consumption.

Download or read book An Electronically Reconfigurable Three Band Low noise Amplifier in 0 5 Mu M GaAs PHEMT Technology written by Jeffrey A. Shatzman and published by . This book was released on 2011 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art RF front-end circuits are typically designed to operate at a single frequency. With an increasing number of available wireless standards, personal mobile communication devices require an increasing number of individually designed RF circuits. To save space and cost, one alternative possibility is to reuse much of the circuitry by utilizing electronically reconfigurable topologies. The ubiquitous low-noise amplifier is one of the many circuits that can be redesigned with the reconfigurable aspect in mind. In this thesis, previous work in reconfigurable LNAs is reviewed as well as a brief comparison of CMOS and GaAs processes used for RF amplifiers. Three new reconfigurable LNA topologies are also presented. The first two topologies, based on the common-gate stage and synchronous filters, are investigated but not manufactured. The third design, based on the cascode topology, was manufactured in a 0.5 mu m GaAs process with enhancement-mode and depletion-mode pHEMTs. The LNA features 12.7 dB, 13.6 dB, and 13.9 dB of gain and noise figures of 2.7 dB, 3.5 dB, and 4.2 dB at 2.5, 3.6 and 5.8 GHz, respectively. The LNA draws 41 mA from a 3.3 V supply.

Download or read book GaAs Low Noise X band Monolithic Microwave Amplifiers written by Douw Gerbrandt Van der Merwe and published by . This book was released on 1985 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Noise Wide Band Amplifiers in Bipolar and CMOS Technologies written by Zhong Yuan Chong and published by Springer Science & Business Media. This book was released on 1990-11-30 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.

Download or read book A Low Oise High linearity Balanced Amplifier in Enhancement mode GaAs PHEMT Technology for Wireless Base stations written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design and realization of a balanced low-noise amplifier (LNA) module in the 2GHz band suitable for wireless infrastructure (base-station) receiver front-end applications. The design effort entails both aspects of MMIC and module/packaging design to realize a fully-matched solution in a miniature 5mmx6mm footprint. The MMIC design leverages Agilent Technologies proprietary 0.5 micron enhancement-mode Pseudomorphic High-Electron-Mobility Transistor (e-pHEMT) technology for best-in-class noise performance and linearity. In a balanced amplifier application with external 3-dB hybrids, this design exhibits a very low noise figure (NF) of 0.9dB, coupled with a high OIP3 (Output Third Order Intercept Point) of 46dBm at 31dB gain. It is also capable of delivering a P-1dB of 31dBm at 2.0GHz with a 5.0V supply.

Download or read book Design and Performance of GaAs MMIC s for L band Low Noise Front end Applications written by and published by . This book was released on 1904 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design and performance of a GaAs monolithic Low Noise Amplifier and Mixer designed for use in communication systems in the 1.5 - 2.5 GHz frequency band. The low noise amplifier uses a reactive serial feedback configuration and has a measured noise figure of 1.8 dB at room temperature and an associated gain of 20 dB over the full bandwidth. The mixer IC uses an active adder and a FET Mixer, including also an IF output buffer. It provides 9 dB conversion gain without need of external bias networks. This was the first design step towards the integration of the two circuit functions on a single chip.

Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Microwave Active Circuit Analysis and Design written by Clive Poole and published by Academic Press. This book was released on 2015-11-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the skills and knowledge required by today’s RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts Contains tutorial questions and problems allowing readers to test their knowledge An accompanying website containing supporting material in the form of slides and software (MATLAB) listings Unique material on negative resistance oscillator design, noise analysis and three-port design techniques Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere

Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.

Download or read book Broadband Circuits for Optical Fiber Communication written by Eduard Säckinger and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to the new and emerging field of broadband circuits for optical fiber communication This exciting publication makes it easy for readers to enter into and deepen their knowledge of the new and emerging field of broadband circuits for optical fiber communication. The author's selection and organization of material have been developed, tested, and refined from his many industry courses and seminars. Five types of broadband circuits are discussed in detail: * Transimpedance amplifiers * Limiting amplifiers * Automatic gain control (AGC) amplifiers * Lasers drivers * Modulator drivers Essential background on optical fiber, photodetectors, lasers, modulators, and receiver theory is presented to help readers understand the system environment in which these broadband circuits operate. For each circuit type, the main specifications and their impact on system performance are explained and illustrated with numerical values. Next, the circuit concepts are discussed and illustrated with practical implementations. A broad range of circuits in MESFET, HFET, BJT, HBT, BiCMOS, and CMOS technologies is covered. Emphasis is on circuits for digital, continuous-mode transmission in the 2.5 to 40 Gb/s range, typically used in SONET, SDH, and Gigabit Ethernet applications. Burst-mode circuits for passive optical networks (PON) and analog circuits for hybrid fiber-coax (HFC) cable-TV applications also are discussed. Learning aids are provided throughout the text to help readers grasp and apply difficult concepts and techniques, including: * Chapter summaries that highlight the key points * Problem-and-answer sections to help readers apply their new knowledge * Research directions that point to exciting new technological breakthroughs on the horizon * Product examples that show the performance of actual broadband circuits * Appendices that cover eye diagrams, differential circuits, S parameters, transistors, and technologies * A bibliography that leads readers to more complete and in-depth treatment of specialized topics This is a superior learning tool for upper-level undergraduates and graduate-level students in circuit design and optical fiber communication. Unlike other texts that concentrate on analog circuits in general or mostly on optics, this text provides balanced coverage of electronic, optic, and system issues. Professionals in the fiber optic industry will find it an excellent reference, incorporating the latest technology and discoveries in the industry.

Download or read book Switchmode RF and Microwave Power Amplifiers written by Andrei Grebennikov and published by Academic Press. This book was released on 2021-03-19 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switchmode RF and Microwave Power Amplifiers, Third Edition is an essential reference book on developing RF and microwave switchmode power amplifiers. The book combines theoretical discussions with practical examples, allowing readers to design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors, design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies with specified output power, also providing techniques on how to design multiband and broadband Doherty amplifiers using different bandwidth extension techniques and implementation technologies. This book provides the necessary information to understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements. It brings a unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems which offer major power consumption savings. Provides a complete history of high-efficiency Class E and Class F techniques Presents a new chapter on Class E with shunt capacitance and shunt filter to simplify the design of high-efficiency power amplifier with broader frequency bandwidths Covers different Doherty architectures, including integrated and monolithic implementations, which are and will be, used in modern communication systems to save power consumption and to reduce size and costs Includes extended coverage of multiband and broadband Doherty amplifiers with different frequency ranges and output powers using different bandwidth extension techniques Balances theory with practical implementation, avoiding a cookbook approach and enabling engineers to develop better designs, including hybrid, integrated and monolithic implementations

Download or read book Understanding Modern Transistors and Diodes written by David L. Pulfrey and published by Cambridge University Press. This book was released on 2010-01-28 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a concise, easy-to-read style, this text for senior undergraduate and graduate courses covers all key topics thoroughly. It is also a useful self-study guide for practising engineers who need a complete, up-to-date review of the subject. Key features: • Rigorous theoretical treatment combined with practical detail • A theoretical framework built up systematically from the Schrödinger Wave Equation and the Boltzmann Transport Equation • Covers MOSFETS, HBTs and HJFETS • Uses the PSP model for MOSFETS • Rigorous treatment of device capacitance • Describes the operation of modern, high-performance transistors and diodes • Evaluates the suitability of various transistor types and diodes for specific modern applications • Covers solar cells and LEDs and their potential impact on energy generation and reduction • Includes a chapter on nanotransistors to prepare students and professionals for the future • Provides results of detailed numerical simulations to compare with analytical solutions • End-of-chapter exercises • Online lecture slides for undergraduate and graduate courses

Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Download or read book RF and Microwave Transmitter Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Transmitter Design is unique in its coverage of both historical transmitter design and cutting edge technologies. This text explores the results of well-known and new theoretical analyses, while informing readers of modern radio transmitters' pracitcal designs and their components. Jam-packed with information, this book broadcasts and streamlines the author's considerable experience in RF and microwave design and development.

Download or read book Practical MMIC Design written by Steve Marsh (Ph. D.) and published by Artech House Publishers. This book was released on 2006 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do you say hello in Arabic? Explore the pages of this Arabic English picture dictionary to learn new words and phrases. Colorful photographs and simple labels make learning Arabic easy.