Download or read book Pyrolysis GC MS Data Book of Synthetic Polymers written by Shin Tsuge and published by Elsevier. This book was released on 2011-10-13 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample

Download or read book Pyrolysis GC MS Data Book of Synthetic Polymers written by Shin Tsuge and published by Elsevier. This book was released on 2011-08-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample

Download or read book Pyrolysis gas Chromatography mass Spectrometry Of Polymeric Materials Second Edition written by Peter Kusch and published by World Scientific. This book was released on 2023-08-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers will find many practical applications of pyrolysis-GC/MS as well as R&D usage in this newly revised and expanded edition. Detailed experimental descriptions for the identification of synthetic polymers and copolymers are included. This volume presents the current state of analytical pyrolysis, and contains full identification of several classes of polymers/copolymers and biopolymers that readers will find helpful. Structures and functions of various types of pyrolyzers are explored, as well as the results of the pyrolysis-gas chromatographic-mass spectrometric identification of synthetic polymers/copolymers and biopolymers at 700°C.Practical applications of this hyphenated technique, detailing the analysis of microplastics, failure analysis in the automotive industry and solutions for technological problems are provided. Numerous practical applications of pyrolysis-GC/MS, for industrial and R&D usage, will be of benefit to Chemists and Engineers, as well as for students of Chemistry and Polymer Sciences.

Download or read book Pyrolysis gas Chromatography Mass Spectrometry Of Polymeric Materials written by Peter Kusch and published by World Scientific. This book was released on 2018-10-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The methodology of analytical pyrolysis-GC/MS has been known for several years, but is seldom used in research laboratories and process control in the chemical industry. This is due to the relative difficulty of interpreting the identified pyrolysis products as well as the variety of them. This book contains full identification of several classes of polymers/copolymers and biopolymers that can be very helpful to the user. In addition, the practical applications can encourage analytical chemists and engineers to use the techniques explored in this volume.The structure and the functions of various types of pyrolyzers and the results of the pyrolysis-gas chromatographic-mass spectrometric identification of synthetic polymers/copolymers and biopolymers at 700°C are described. Practical applications of these techniques are also included, detailing the analysis of microplastics, failure analysis in the automotive industry and solutions for technological problems.

Download or read book Analytical Pyrolysis of Synthetic Organic Polymers written by Serban C. Moldoveanu and published by Elsevier. This book was released on 2005-01-20 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Pyrolysis of Synthetic Organic Polymers is a follow-up to Analytical Pyrolysis of Natural Organic Polymers, which is volume 20 of the series. The main focus of the book is on practical applications of analytical pyrolysis in synthetic organic polymer identification and characterization. The first part of the book has five chapters including an introduction, a discussion on physico-chemistry of thermal degradation of synthetic polymers and on instrumentation used in analytical pyrolysis, a chapter discussing what type of information can be obtained from analytical pyrolysis, and a chapter dedicated to the analysis and characterization of synthetic polymers. The second part systematically covers the analytical pyrolysis of various classes of synthetic polymers. Some theoretical background for the understanding of polymer structure using analytical pyrolysis is also discussed. * Includes broad coverage of organic synthetic macromolecules * Focuses on physico-chemistry of thermal degradation, and the analytical pyrolysis of various classes of synthetic polymers * Is well written and suitable for both researchers and chemists working in analytical chemistry or in synthetic polymers

Download or read book Applied Pyrolysis Handbook written by Thomas P. Wampler and published by CRC Press. This book was released on 2006-12-13 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical pyrolysis allows scientists to use routine laboratory instrumentation for analyzing complex, opaque, or insoluble samples more effectively than other analytical techniques alone. Applied Pyrolysis Handbook, Second Edition is a practical guide to the application of pyrolysis techniques to various samples and sample types for a dive

Download or read book Analytical Pyrolysis of Synthetic Organic Polymers written by Serban C. Moldoveanu and published by Elsevier Science. This book was released on 2005-03-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Pyrolysis of Synthetic Organic Polymers is a follow-up to Analytical Pyrolysis of Natural Organic Polymers, which is volume 20 of the series. The main focus of the book is on practical applications of analytical pyrolysis in synthetic organic polymer identification and characterization. The first part of the book has five chapters including an introduction, a discussion on physico-chemistry of thermal degradation of synthetic polymers and on instrumentation used in analytical pyrolysis, a chapter discussing what type of information can be obtained from analytical pyrolysis, and a chapter dedicated to the analysis and characterization of synthetic polymers. The second part systematically covers the analytical pyrolysis of various classes of synthetic polymers. Some theoretical background for the understanding of polymer structure using analytical pyrolysis is also discussed. * Includes broad coverage of organic synthetic macromolecules * Focuses on physico-chemistry of thermal degradation, and the analytical pyrolysis of various classes of synthetic polymers * Is well written and suitable for both researchers and chemists working in analytical chemistry or in synthetic polymers

Download or read book Analytical Pyrolysis Handbook written by Karen D. Sam and published by CRC Press. This book was released on 2021-03-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical pyrolysis allows scientists to use routine laboratory instrumentation for analyzing complex, opaque, or insoluble samples more effectively than other analytical techniques alone. Analytical Pyrolysis Handbook, Third Edition is a practical guide to the application of pyrolysis techniques to various samples and sample types for a diversity of fields including microbiology, forensic science, industrial research, and environmental analysis. The much-anticipated third edition incorporates recent technological advances that increase the technique’s sensitivity to trace elements, improve its reproducibility, and expand its applicability. The book reviews the types of instrumentation available to perform pyrolysis and offers guidance for interfacing instruments and integrating other analytical techniques, including gas chromatography and mass spectrometry. Fully updated with new sample pyrograms, figures, references, and real-world examples, this edition also highlights new areas of application including cultural materials, forensic analysis, and environmental studies. This book illustrates how the latest advances make pyrolysis a practical, cost-effective, reliable, and flexible alternative for increasingly complex sample analyses. Analytical Pyrolysis Handbook, Third Edition is an essential, one-stop guide for determining if pyrolysis meets application-specific needs as well as performing pyrolysis and handling the data obtained.

Download or read book Analytical Pyrolysis written by Peter Kusch and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical pyrolysis deals with the structural identification and quantitation of pyrolysis products with the ultimate aim of establishing the identity of the original material and the mechanisms of its thermal decomposition. The pyrolytic process is carried out in a pyrolyzer interfaced with analytical instrumentation such as gas chromatography (GC), mass spectrometry (MS), gas chromatography coupled with mass spectrometry (GC/MS), or with Fourier-transform infrared spectroscopy (GC/FTIR). By measurement and identification of pyrolysis products, the molecular composition of the original sample can often be reconstructed.This book is the outcome of contributions by experts in the field of pyrolysis and includes applications of the analytical pyrolysis-GC/MS to characterize the structure of synthetic organic polymers and lignocellulosic materials as well as cellulosic pulps and isolated lignins, solid wood, waste particle board, and bio-oil. The thermal degradation of cellulose and biomass is examined by scanning electron micrography, FTIR spectroscopy, thermogravimetry (TG), differential thermal analysis, and TG/MS. The calorimetric determination of high heating values of different raw biomass, plastic waste, and biomass/plastic waste mixtures and their by-products resulting from pyrolysis is described.

Download or read book Analytical Pyrolysis of Natural Organic Polymers written by S.C. Moldoveanu and published by Elsevier. This book was released on 2020-09-12 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Pyrolysis of Natural Organic Polymers, Second Edition, Volume 20 describes the methodology of analytical pyrolysis, the results of pyrolysis for a variety of biopolymers, and several practical applications of analytical pyrolysis on natural organic polymers and their composite materials. The book describes the results of pyrolysis for biopolymers and some chemically modified natural organic polymers. In addition, the many applications of analytical pyrolysis are covered in detail, including topics such as polymer detection used in forensic science, structure elucidation of specific polymers, and identification of small molecules present in polymers (anti-oxidants, plasticizers, etc.). Assembles all essential information on the pyrolysis of natural polymers in one volume, together with the techniques and instrumentation used Covers advances and developments over the last 20 years, including discussions on the many different types of apparatus commercially available Includes reference lists in every chapter to guide readers on a path to further study

Download or read book Mass Spectrometry of Polymers written by Giorgio Montaudo and published by CRC Press. This book was released on 2001-10-29 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass Spectrometry (MS) has rapidly become an indispensable tool in polymer analysis, and modern MS today complements in many ways the structural data provided by Nuclear Magnetic Resonance (NMR) and Infrared (IR) methods. Recent advances have sparked a growing interest in this field and established a need for a summary of progress made and results

Download or read book Handbook of GC MS written by Hans-Joachim Hubschmann and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only comprehensive reference on this popular and rapidly developing technique provides a detailed overview, ranging from fundamentals to applications, including a section on the evaluation of GC-MS analyses. As such, it covers all aspects, including the theory and principles, as well as a broad range of real-life examples taken from laboratories in environmental, food, pharmaceutical and clinical analysis. It also features a glossary of approximately 300 terms and a substance index that facilitates finding a specific application. The first two editions were very well received, making this handbook a must-have in all analytical laboratories using GC-MS.

Download or read book Plastics in the Aquatic Environment Part I written by Friederike Stock and published by Springer Nature. This book was released on 2021-10-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review of how plastic pollution is affecting fresh and marine waters, and what the current challenges in plastic waste assessment and management in the aquatic environment are. Plastic waste comprises particles with heterogeneous physicochemical properties such as large size-range, different shapes and polymer types with various additives determining their environmental fate and risk. This complexity raises several open research questions which are explored in this book. Examples are the plastic uptake by aquatic organisms, degradation processes as well as sources and sinks in the environment. Readers will discover real case studies of plastic pollution detection and management in different parts of the world, including Asia, America and Europe, which provide an integrated overview of the global scope of this issue. This book and the companion volume Plastics in the Aquatic Environment - Part II: Stakeholders' Role Against Pollution are valuable resources to students, researchers, policymakers and environmental managers interested in plastic pollution and working towards its reduction.

Download or read book Marine Anthropogenic Litter written by Melanie Bergmann and published by Springer. This book was released on 2015-06-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how man-made litter, primarily plastic, has spread into the remotest parts of the oceans and covers all aspects of this pollution problem from the impacts on wildlife and human health to socio-economic and political issues. Marine litter is a prime threat to marine wildlife, habitats and food webs worldwide. The book illustrates how advanced technologies from deep-sea research, microbiology and mathematic modelling as well as classic beach litter counts by volunteers contributed to the broad awareness of marine litter as a problem of global significance. The authors summarise more than five decades of marine litter research, which receives growing attention after the recent discovery of great oceanic garbage patches and the ubiquity of microscopic plastic particles in marine organisms and habitats. In 16 chapters, authors from all over the world have created a universal view on the diverse field of marine litter pollution, the biological impacts, dedicated research activities, and the various national and international legislative efforts to combat this environmental problem. They recommend future research directions necessary for a comprehensive understanding of this environmental issue and the development of efficient management strategies. This book addresses scientists, and it provides a solid knowledge base for policy makers, NGOs, and the broader public.

Download or read book Characterization and Analysis of Microplastics written by and published by Elsevier. This book was released on 2017-03-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization and Analysis of Microplastics, Volume 75, aims to fulfill the gap on the existence of published analytical methodologies for the identification and quantification of microplastics. This overview includes the following main topics: introduction to the fate and behavior of microplastics in the environment, assessment of sampling techniques and sample handling, morphological, physical, and chemical characterization of microplastics, and the role of laboratory experiments in the validation of field data. The characterization and analysis of microplastics is a hot topic considering the current need for reliable data on concentrations of microplastics in environmental compartments. This book presents a comprehensive overview of the analytical techniques and future perspectives of analytical methodologies in the field. Concise, comprehensive coverage of analytical techniques and applications Clear diagrams adequately support important topics Includes real examples that illustrate applications of the analytical techniques on the sampling, characterization, and analysis of microplastics

Download or read book Polymer Characterisation written by B.J. Hunt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers continue to play an ever increasing role in the modern world. In fact it is quite inconceivable to most people that we could ever have existed of the increased volume and variety of materials without them. As a result currently available, and the diversity of their application, characterisation has become an essential requirement of industrial and academic laboratories in volved with polymeric materials. On the one hand requirements may come from polymer specialists involved in the design and synthesis of new materials who require a detailed understanding of the relationship between the precise molecular architecture and the properties of the polymer in order to improve its capabilities and range of applications. On the other hand, many analysts who are not polymer specialists are faced with the problems of analysing and testing a wide range of polymeric materials for quality control or material specification purposes. We hope this book will be a useful reference for all scientists and techno or industrial laboratories, logists involved with polymers, whether in academic and irrespective of their scientific discipline. We have attempted to include in one volume all of the most important techniques. Obviously it is not possible to do this in any great depth but we have encouraged the use of specific examples to illustrate the range of possibilities. In addition numerous references are given to more detailed texts on specific subjects, to direct the reader where appropriate. The book is divided into II chapters.

Download or read book Sample Preparation in Chromatography written by S.C. Moldoveanu and published by Elsevier. This book was released on 2002-05-08 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sample preparation is an essential step in many analyses. This book approaches the topic of sample preparation in chromatography in a methodical way, viewing it as a logical connection between sample collection and analytical chromatography. Providing a guide for choosing the appropriate sample preparation for a given analysis, this book describes various ways to process the sample, explaining the principle, discussing the advantages and disadvantages, describing the applicability to different types of samples, and showing the fitness to specific chromatographic determinations. The first part of the book contains an overview of sample preparation showing its relation to sample collection and to the core chromatographic analysis. The second part covers procedures that do not use chemical modifications of the analyte and includes methods for sample dissolution, concentration and cleanup designed mainly for modifying the initial matrix of the sample. This part starts with conventional separations such as filtration and distillation and finishes with more advanced techniques such as solid phase extraction and electroseparations. The third part gives a description of the chemical modifications that can be performed on a sample either for fractionation purposes or to improve a specific property of the analyte. This part includes derivatizations, polymer chemical degradations, and pyrolysis.