Download or read book Purified Isophthalic Acid Production Process Cost Analysis IPA E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Purified Isophthalic Acid (PIA) production from m-xylene. The process examined is a typical oxidation process. In this process, p-xylene is oxidized to Isophthalic Acid. The Isophthalic Acid from reaction is separated as a Crude Isophthalic Acid (CIA) intermediate. The CIA is subjected to purification via hydrogenation in order to obtain PIA as the final product. This report was developed based essentially on the following reference(s): Keywords: Unsaturated Polyester, UPR, Phthalic Acid, Meta-Xylene, PIA

Download or read book Sodium Hypochlorite via Chemical Process Cost Analysis Sodium Hypochlorite E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of sodium hypochlorite production from sodium hydroxide and chlorine. The process examined is a typical chemical process. This report was developed based essentially on the following reference(s): "Chlorine Oxides and Chlorine Oxygen Acids", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Bleach, Chlorination, Caustic Soda, NaOH, Solvay Chemicals, Chlor-alkali

Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison Provides essential information and guidance for FDA submissions required for new medical devices

Download or read book Wet Cake Filtration written by Harald Anlauf and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guides readers through the entire process of liquid filtrations, from a basic understanding and lab scale testing to advanced process applications and up-scaling of processes Wet Cake Filtration is a key method in solid-liquid separation and plays an important role in many industrial processes from the separation of solid products from a liquid, to removing contaminants in wastewater treatment. Furthermore, separation processes are rarely isolated and the integration as well as necessary pre-treatments in the process chain must be carefully considered and implemented. Supported by more than 40 years of research, development, and teaching, this book provides a comprehensive treatment of all relevant aspects in wet cake filtration as a key method in solid-liquid-separation. The first part of Wet Cake Filtration: Fundamentals, Equipment, Strategies discusses general principles and applications of wet cake filtration, determination of proper feed streams, and filter cake formation. The next chapters deal with variations of pre-treatment and process conditions, including necessary aspects of lab scale tests, up-scaling, and filter design. This is further strengthened with chapters examining particle purification, yield maximization, and cake deliquoring. Lastly, the filter media is discussed as the central piece of wet cake filtration. Beside the different possibilities of available filter media structures and process relevant aspects of filter media selection, the reliable characterization of pore sizes by porometry and innovative additional functionalities are introduced. -Provides information on wet cake filtration?the necessary pre-treatments and process considerations?to guide the reader to develop or improve their own processes -Offers the necessary tools that allow the engineer to transform a lab scale test into a scaled-up process -Presents cake filtration process-related topics like slurry characterization or slurry pretreatment, and special developments such as hyperbaric filtration or steam pressure filtration -Discusses promising new processes like gasless cake desaturation and shrinkage crack free cake desaturation Wet Cake Filtration is a must-have resource for every engineer working with wet cake filtration, including water chemists, catalytic chemists, food chemists, chemical engineers, biotechnologists, and process engineers.

Download or read book Introduction to Infrared and Raman Spectroscopy written by Norman Colthup and published by Elsevier. This book was released on 2012-12-02 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Infrared and Raman Spectroscopy focuses on the theoretical and experimental aspects of infrared and Raman spectroscopy, with emphasis on detailed group frequency correlations and their vibrational origin. Topics covered include vibrational and rotational spectra, molecular symmetry, methyl and methylene groups, triple bonds and cumulated double bonds, and olefin groups. Aromatic and heteroaromatic rings are also considered, along with carbonyl compounds and molecular vibrations. This book is comprised of 14 chapters and begins with a discussion on the use of Raman and infrared spectroscopy to study the vibrational and rotational frequencies of molecules, paying particular attention to photon energy and degrees of freedom of molecular motion. The quantum mechanical harmonic oscillator and the anharmonic oscillator are described. The next chapter focuses on the experimental techniques and instrumentation needed to measure infrared absorption spectra and Raman spectra. Symmetry is then discussed from the standpoint of the spectroscopist. The following chapters explore the vibrational origin of group frequencies, with an emphasis on mechanical effects; spectra-structure correlations; and the spectra of compounds such as ethers, alcohols, and phenols. The final chapter demonstrates how the frequencies and forms of a nonlinear molecule's normal modes of vibration may be calculated mathematically. This monograph will be a useful resource for spectroscopists and physical scientists.

Download or read book Unit Operations of Chemical Engineering written by Warren L. McCabe and published by . This book was released on 1965 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Permeability Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2011-09-08 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permeability properties are essential data for the selection of materials and design of products across a broad range of market sectors from food packaging to Automotive applications to Medical Devices. This unique handbook brings together a wealth of permeability data in a form that enables quick like-for-like comparisons between materials. The data is supported by a full explanation of its interpretation, and an introduction to the engineering aspects of permeability in polymers. The third edition includes expanded explanatory text which makes the book accessible to novices as well as experienced engineers, written by industry insider and author Larry McKeen (DuPont), and 20% new data and major new explanatory text sections to aid in the interpretation and application of the data. A unique collection of permeability data designed to enable quick like-for-like comparisons between different materials Third edition includes 20% new data and expanded explanatory text, which makes the book accessible to novices as well as experienced engineers Essential reference for materials engineers, design engineers and applications engineers across sectors including packaging, automotive and medical devices

Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by Elsevier. This book was released on 2010-03-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.

Download or read book Fatigue and Tribological Properties of Plastics and Elastomers written by Laurence W. McKeen and published by Butterworth-Heinemann. This book was released on 2009-11-17 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology. The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics. Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view. A hard-working reference tool: part of the daily workflow of engineers and scientists involved in the plastics industry and product design with plastics The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues The data in this book provide engineers with the tools they need to design for low failure rates

Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2009-09-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. Structured to make it easy for the reader to find solutions for specific property requirements Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Download or read book Handbook of Adhesives and Surface Preparation written by Sina Ebnesajjad and published by William Andrew. This book was released on 2010-12-15 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Adhesives and Surface Preparation provides a thoroughly practical survey of all aspects of adhesives technology from selection and surface preparation to industrial applications and health and environmental factors. The resulting handbook is a hard-working reference for a wide range of engineers and technicians working in the adhesives industry and a variety of industry sectors that make considerable use of adhesives. Particular attention is given to adhesives applications in the automotive, aerospace, medical, dental and electronics sectors. A handbook that truly focuses on the applied aspects of adhesives selection and applications: this is a book that won't gather dust on the shelf Provides practical techniques for rendering materials surfaces adherable Sector-based studies explore the specific issues for automotive and aerospace, medical, dental and electronics

Download or read book Fluoropolymer Additives written by Sina Ebnesajjad and published by William Andrew. This book was released on 2011-12-05 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide you with a step by step description of techniques to select and incorporate these additives in various products. Engineers and scientits involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of ‘fluoropolymer additives’ expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies

Download or read book The Effect of Creep and Other Time Related Factors on Plastics and Elastomers written by Laurence W. McKeen and published by Elsevier. This book was released on 2009-06-25 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the classic data book, The Effect of Creep and Other Time Related Factors on Plastics and Elastomers (originally published in 1991), has been extensively revised with the addition of an abundance of new data, the removal of all out-dated information, and the complete rebuilding of the product and company listings.This new edition also has been reorganized from a polymer chemistry point of view. Plastics of similar polymer types are grouped into chapters, each with an introduction that briefly explains the chemistry of the polymers used in the plastics. An extensive introductory chapter has also been added, which summarizes the chemistry of making polymers, the formulation of plastics, creep-testing, test methods, measurements, and charts, as well as theory and plastic selection.Each chapter is generally organized by product and concludes with comparisons of brand or generic products. The appendices include a list of trade names, plastics sold under those names, and manufacturer. A list of conversion factors for stress measures is also included.ABOUT THE AUTHORLaurence W. McKeen earned a B.S. in Chemistry from Rensselaer Polytechnic Institute in 1973 and a Ph.D. in 1978 from the University of Wisconsin. He began his career with DuPont in 1978 as a mass spectroscopist, but moved into product development in the Teflon® Finishes group in 1980. Dr. McKeen has accumulated over 28 years of experience in product development and applications, working with customers in a wide range of industries, which has led to the creation of dozens of commercial products. More than 8 core chapters, which serve as a databank for evaluating the creep of plastics Over 600 uniform graphs for more than 45 generic families of plastics are explained Types of graphs include: (1) Isochronous Stress–Strain Curves at Various Times and Temperatures (2) Creep Strain or Creep Deformation versus Time at Various Stress Levels and Temperatures (3) Various Modulus Measures (Tensile, Compressive, Flexural) versus Time at Various Temperatures (4) Hoop Stress versus Time at Various Temperatures (5) Stress Cracking and Other Plastics Failure versus Time (6) Creep Rupture versus Time

Download or read book PEEK Biomaterials Handbook written by Steven M. Kurtz and published by William Andrew. This book was released on 2011-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEEK biomaterials are currently used in thousands of spinal fusion patients around the world every year. Durability, biocompatibility and excellent resistance to aggressive sterilization procedures make PEEK a polymer of choice, replacing metal in orthopedic implants, from spinal implants and hip replacements to finger joints and dental implants. This Handbook brings together experts in many different facets related to PEEK clinical performance as well as in the areas of materials science, tribology, and biology to provide a complete reference for specialists in the field of plastics, biomaterials, medical device design and surgical applications. Steven Kurtz, author of the well respected UHMWPE Biomaterials Handbook and Director of the Implant Research Center at Drexel University, has developed a one-stop reference covering the processing and blending of PEEK, its properties and biotribology, and the expanding range of medical implants using PEEK: spinal implants, hip and knee replacement, etc. Covering materials science, tribology and applications Provides a complete reference for specialists in the field of plastics, biomaterials, biomedical engineering and medical device design and surgical applications

Download or read book Stretch Blow Molding written by Ottmar Brandau and published by William Andrew. This book was released on 2016-08-10 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau’s focus is on optimizing the production process, improving quality, and reducing cycle time. In this new edition, the author has thoroughly reviewed the content of the book, providing updates on new developments in stretch blow molding, including neck sizes, new equipment and processes, and the economics of the process. The book is a thoroughly practical handbook which provides engineers and managers with the toolkit to improve production and engineering aspects in their own businesses, allowing them to save money, increase output, and improve competitiveness by adopting new technologies. Provides knowledge and understanding of the latest technological and best practice developments in stretch blow molding Includes money saving, practical strategies to optimize the production process, improve quality, and reduce cycle times Provides a guide to the training of operators, as well as tactics on how to troubleshoot when products are faulty, productivity is low, or machinery is not operating as expected

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-20 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don’t teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb

Download or read book Solid State Characterization of Pharmaceuticals written by Richard A. Storey and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid state characterization is central to the pharmaceutical industry, as drug products are, in an overwhelming number of cases, produced as solid materials. Selection of the optimum solid form is a critical aspect of the development of pharmaceutical compounds, due to their ability to exist in more than one form or crystal structure (polymorphism). These polymorphs exhibit different physical properties which can affect their biopharmaceutical properties. This book provides an up-to-date review of the current techniques used to characterize pharmaceutical solids. Ensuring balanced, practical coverage with industrial relevance, it covers a range of key applications in the field. The following topics are included: Physical properties and processes Thermodynamics Intellectual guidance X-ray diffraction Spectroscopy Microscopy Particle sizing Mechanical properties Vapour sorption Thermal analysis & Calorimetry Polymorph prediction Form selection