Download or read book Nuclear Fuel Cycle Science and Engineering written by Ian Crossland and published by Elsevier. This book was released on 2012-09-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. - Provides a comprehensive and holistic review of the complete nuclear fuel cycle - Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis - Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication

Download or read book Liquid Liquid Extraction Equipment written by J. C. Godfrey and published by Wiley. This book was released on 1995-01-09 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the use of liquid—liquid extraction equipment has attracted widespread interest from all major chemical engineering, petroleum and pharmaceutical companies as well as university-based scientists and engineers. Liquid—Liquid Extraction Equipment presents : a critical analysis of all available information, including practical recommendations new ideas on performance enhancement and equipment selection an up-to-date review of research results on equipment performance illustrations of present understanding using well-known equipment a concise survey of past, present and forthcoming procedures The combination of the historical aspects of the subject, with extensive references and illustrations, make this a unique information source. All researchers, in industry and academia, using this type of equipment will find Liquid—Liquid Extraction Equipment an authoritative reference work and a solid basis for future research projects.

Download or read book Actinide Separations written by James D. Navratil and published by . This book was released on 1980 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Energy written by Nicholas Tsoulfanidis and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Energy provides an authoritative reference on all aspects of the nuclear industry from fundamental reactor physics calculations to reactor design, nuclear fuel resources, nuclear fuel cycle, radiation detection and protection, and nuclear power economics. Featuring 19 peer-reviewed entries by recognized authorities in the field, this book provides comprehensive, streamlined coverage of fundamentals, current areas of research, and goals for the future. The chapters will appeal to undergraduate and graduate students, researchers, and energy industry experts.

Download or read book Nuclear Fuel Cycle Optimization written by P. Silvennoinen and published by Elsevier. This book was released on 2013-10-22 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fuel Cycle Optimization: Methods and Modelling Techniques discusses applicable methods for analysis of fuel cycle logistics and optimization and evaluation of the economics of various reactor strategies. The opening chapter covers the nuclear fuel cycle, while the next chapter tackles uranium supply and demand. Chapter 3 discusses basic model of the light water reactor (LWR). The fourth chapter talks about the resolution of uncertainties, and the fifth chapter discusses the assessment of proliferation risks. Chapter 6 covers multigoal optimization, while Chapter 7 deals with the generalized fuel cycle models. The eighth chapter covers reactor strategy calculations, whereas the last chapter discusses interface with energy strategy. The book will appeal to students of energy economics or of nuclear engineering.

Download or read book Advances in Crystallization Processes written by Yitzhak Mastai and published by BoD – Books on Demand. This book was released on 2012-04-27 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization is used at some stage in nearly all process industries as a method of production, purification or recovery of solid materials. In recent years, a number of new applications have also come to rely on crystallization processes such as the crystallization of nano and amorphous materials. The articles for this book have been contributed by the most respected researchers in this area and cover the frontier areas of research and developments in crystallization processes. Divided into five parts this book provides the latest research developments in many aspects of crystallization including: chiral crystallization, crystallization of nanomaterials and the crystallization of amorphous and glassy materials. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers and industrial chemists in the process industries as well as crystallization workers and students in industry and academia.

Download or read book Solvent Extraction of Uranium written by and published by . This book was released on 1957 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology Applications for Clean Water written by Mamadou Diallo and published by William Andrew. This book was released on 2009-02-12 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: The World Health Organization in 2004 estimated approximately 1.1 billion people did not have access to clean water and that 35% of Third World residents died from water-borne illnesses. While the situation is grim, recent advances strongly indicate that many of the current water quality problems can be addresses – and potentially resolved – using nanotechnology.Nanotechnology is already having a dramatic impact on research in water quality and Nanotechnology Applications for Clean Water highlights both the challenges and the opportunities for nanotechnology to positively influence this area of environmental protection.Here you will find detailed information on breakthroughs, cutting edge technologies, current research, and future trends that may affect acceptance of widespread applications. The first four parts of the book cover specific topics including using nanotechnology for clean drinking water in both large scale water treatment plants and in point-of-use systems. For instance, recent advances show that many of the current problems involving water quality can be addressed using nanosorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes, and nanoparticle enhanced filtration. The book also discusses existing technologies and future potential for groundwater remediation, pollution prevention, and sensors. The final part discusses the inherent societal implications that may affect acceptance of widespread applications. Over 80 leading experts from around the world share their wealth of knowledge in this truly unique reference. Institutions such as Center for the Purification of Water and Systems (Univ. of Illinois at Urbana-Champaign); UCLA Water Technology Center; Carnegie Mellon University, University of Kentucky; The University of Western Ontario; Pacific Northwest National Laboratory; National Institute for Advanced Industrial Science and Technology (Japan), Munasinghe Institute for Development (Sri Lanka) and the Woodrow Wilson Center for Scholars are just a few of the knowledge centers represented in this book. Water quality is a serious, global issue in which government bodies and scientific communities face many challenges in ensuring clean water is available to everyone. Nanotechnology is already showing dramatic results, and this book is an attempt to share current technologies and future possibilities in reaching this goal. From the Foreword:"Researchers and practitioners may find in this volume, key challenges regarding clean water resources. The presentations may crystallize new research and education programs." - Mihail Roco, U.S. National Science Foundation and U.S. Nanotechnology Initiative - Contributors from the US, India, Canada, Japan, UK, Sri Lanka, and South Africa - Provides detailed information on breakthroughs, cutting edge technologies, current research, and future trends that may affect acceptance of widespread applications - Covers specific topics including using nanotechnology for clean drinking water in both large scale water treatment plants and in point-of-use systems - Discusses existing technologies and future potential for groundwater remediation, pollution prevention, and sensors - Highlights both the challenges and the opportunities for nanotechnology to positively influence this area of environmental protection

Download or read book Uranium Processing and Properties written by Jonathan S. Morrell and published by Springer Science & Business Media. This book was released on 2013-07-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.

Download or read book State of the art Report on the Progress of Nuclear Fuel Cycle Chemistry written by and published by . This book was released on 2018 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of advanced nuclear systems requires that new technologies associated with the back end of the fuel cycle are developed. The separation of minor actinides from other fuel components is one of the advanced concepts being studied to help close the nuclear fuel cycle and to improve the long-term effects on the performance of geological repositories. Separating spent fuel elements and subsequently converting them through transmutation into short-lived nuclides should considerably reduce the longterm risks associated with nuclear power generation.

Download or read book Advanced Separation Techniques for Nuclear Fuel Reprocessing and Radioactive Waste Treatment written by Kenneth L Nash and published by Elsevier. This book was released on 2011-03-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard.Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes.With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field. - A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment - Details emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extraction - Discusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment

Download or read book Science and Technology of Tributyl Phosphate Selected technical and industrial uses written by and published by . This book was released on 1987 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Disposition of High Level Waste and Spent Nuclear Fuel written by National Research Council and published by National Academies Press. This book was released on 2001-07-05 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused attention by world leaders is needed to address the substantial challenges posed by disposal of spent nuclear fuel from reactors and high-level radioactive waste from processing such fuel. The biggest challenges in achieving safe and secure storage and permanent waste disposal are societal, although technical challenges remain. Disposition of radioactive wastes in a deep geological repository is a sound approach as long as it progresses through a stepwise decision-making process that takes advantage of technical advances, public participation, and international cooperation. Written for concerned citizens as well as policymakers, this book was sponsored by the U.S. Department of Energy, U.S. Nuclear Regulatory Commission, and waste management organizations in eight other countries.

Download or read book Plutonium and Highly Enriched Uranium 1996 written by David Albright and published by . This book was released on 1997 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plutonium and highly enriched uranium (HEU) are the basic materials used in nuclear weapons. Plutonium also plays an important part in the generation of nuclear electricity. Knowing how much plutonium and HEU exists, where and in which form is vital for international security and nuclear commerce. This book is a thorough revision of the World Inventory of Plutonium and highly Enriched Uranium, 1992. It provides a rigorous and comprehensive assessment of the amounts of plutonium and HEU in military and civilian programmes, in nuclear and non-nuclear weapon states, and in countries seeking to acquire nuclear weapons. The capibilities that exist for producing these materials around the world are examined in depth, as are the policy issues raised by them. Containing much new information, this book is indispensable to all those concerned with the great contemporary issues in international nuclear relations: arms reductions in the nuclear weapon states, nuclear proliferation, nuclear smuggling, the roles of plutonium and enriched uranium in the nuclear fuel-cycle, and the disposition of surplus weapon material.

Download or read book Engineering for Nuclear Fuel Reprocessing written by Justin T. Long and published by . This book was released on 1967 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Nuclear Waste Immobilisation written by Michael I Ojovan and published by Elsevier. This book was released on 2013-12-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the authors' extensive experience in the processing and disposal of waste, An Introduction to Nuclear Waste Immobilisation, Second Edition examines the gamut of nuclear waste issues from the natural level of radionuclides in the environment to geological disposal of waste-forms and their long-term behavior. It covers all-important aspects of processing and immobilization, including nuclear decay, regulations, new technologies and methods. Significant focus is given to the analysis of the various matrices used, especially cement and glass, with further discussion of other matrices such as bitumen. The final chapter concentrates on the performance assessment of immobilizing materials and safety of disposal, providing a full range of the resources needed to understand and correctly immobilize nuclear waste.

Download or read book Thorium Fuel Cycle written by International Atomic Energy Agency and published by . This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a critical review of the thorium fuel cycle: potential benefits and challenges in the thorium fuel cycle, mainly based on the latest developments at the front end of the fuel cycle, applying thorium fuel cycle options, and at the back end of the thorium fuel cycle.