Download or read book Pumping of Liquids written by F. A. Holland and published by . This book was released on 1966 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the pumping of liquids through pipelines.

Download or read book Working Guide to Pump and Pumping Stations written by E. Shashi Menon and published by Gulf Professional Publishing. This book was released on 2009-10-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Pumps and Pumping Stations: Calculations and Simulations discusses the application of pumps and pumping stations used in pipelines that transport liquids. It provides an introduction to the basic theory of pumps and how pumps are applied to practical situations using examples of simulations, without extensive mathematical analysis. The book begins with basic concepts such as the types of pumps used in the industry; the properties of liquids; the performance curve; and the Bernoullis equation. It then looks at the factors that affect pump performance and the various methods of calculating pressure loss in piping systems. This is followed by discussions of pump system head curves; applications and economics of centrifugal pumps and pipeline systems; and pump simulation using the software PUMPCALC. In most cases, the theory is explained and followed by solved example problems in both U.S. Customary System (English) and SI (metric) units. Additional practice problems are provided in each chapter as further exercise. This book was designed to be a working guide for engineers and technicians dealing with centrifugal pumps in the water, petroleum, oil, chemical, and process industries. Calculations for their selection, sizing and power output Case studies based on the author’s 35 years of field experience Covers all types of pumps Simplified models and simulations

Download or read book The Modern Theory and Practice of Pumping written by Norman Swindin and published by . This book was released on 1924 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Pumps and Pumping written by Brian Nesbitt and published by Elsevier. This book was released on 2006-10-18 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an experienced engineer, this book contains practical information on all aspects of pumps including classifications, materials, seals, installation, commissioning and maintenance. In addition you will find essential information on units, manufacturers and suppliers worldwide, providing a unique reference for your desk, R&D lab, maintenance shop or library. * Includes maintenance techniques, helping you get the optimal performance out of your pump and reducing maintenance costs * Will help you to understand seals, couplings and ancillary equipment, ensuring systems are set up properly to save time and money * Provides useful contacts for manufacturers and suppliers who specialise in pumps, pumping and ancillary equipment

Download or read book A Pump for Corrosive Liquids written by James N. Towle and published by . This book was released on 1964 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Know and Understand Centrifugal Pumps written by L. Bachus and published by Elsevier. This book was released on 2003-07-25 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumps are commonly encountered in industry and are essential to the smooth running of many industrial complexes. Mechanical engineers entering industry often have little practical experience of pumps and their problems, and need to build up an understanding of the design, operation and appropriate use of pumps, plus how to diagnose faults and put them right. This book tackles all these aspects in a readable manner, drawing on the authors' long experience of lecturing and writing on centrifugal pumps for industrial audiences.

Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.

Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.

Download or read book Pumping in the Chemical Works written by Norman Swindin and published by . This book was released on 1922 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pumping written by Frank R. Spellman and published by CRC Press. This book was released on 2001-01-15 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book series devoted to explaining the full range of specialized areas required of water and wastewater plant operators. Each volume is designed to give operators the basic knowledge of a subject needed for certification, licensure, and improved job performance. Checkpoints, self-tests and a final examination with questions based on

Download or read book Pumps and Blowers written by Alexey Joakim Stepanoff and published by . This book was released on 1978 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pumping and Water Power written by Fred. A. Bradley and published by . This book was released on 1912 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Centrifugal Pumps Newtonian Liquids written by American Institute of Chemical Engineers. Equipment Testing Procedures Committee and published by . This book was released on 2002 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pumping Machinery Theory and Practice written by Hassan M. Badr and published by John Wiley & Sons. This book was released on 2015-02-16 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumping Machinery Theory and Practice comprehensively covers the theoretical foundation and applications of pumping machinery. Key features: Covers characteristics of centrifugal pumps, axial flow pumps and displacement pumps Considers pumping machinery performance and operational-type problems Covers advanced topics in pumping machinery including multiphase flow principles, and two and three-phase flow pumping systems Covers different methods of flow rate control and relevance to machine efficiency and energy consumption Covers different methods of flow rate control and relevance to machine efficiency and energy consumption

Download or read book Pumps In Chemical Engineering Including Older Types And Useful Equations written by Norman Swindin and published by Watchmaker Publishing. This book was released on 2003-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Practical Pumping Handbook written by Ross C Mackay and published by Elsevier. This book was released on 2004-09-17 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Practical Pumping Handbook is a practical account of pumping, piping and seals starting with basics and providing detailed but accessible information on all aspects of the pumping process and what can go wrong with it. Written by an acknowledged expert with years of teaching experience in the practical understanding of pumps and systems. Aids understanding of pumps to minimize failures and time-out A practical handbook covering the basics of the pumping process Written by an acknowledged expert

Download or read book Hydrodynamics of Pumps written by Christopher Earls Brennen and published by . This book was released on 2011 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Hydrodynamics of Pumps is a reference text for pump experts and students exploring pumps and pump design"--. "Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students exploring pumps and pump design. This book is about the fluid dynamics of liquid turbomachines, particularly pumps. It focuses on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows, and turbomachinery as well as basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples"--