Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1996 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Current Research in Pulsed Laser Deposition written by Liviu Duta and published by MDPI. This book was released on 2021-08-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its limitation in terms of surface covered area, the PLD technique still gathers interest among researchers by offering endless possibilities for tuning thin film composition and enhancing their properties of interest due to: (i) the easiness of a stoichiometric transfer even for very complex target materials, (ii) high adherence of the deposited structures to the substrate, (iii) controlled degree of phase, crystallinity, and thickness of deposited coatings, (iv) versatility of the experimental set-up which allows for simultaneous ablation of multiple targets resulting in combinatorial maps or consecutive ablation of multiple targets producing multi-layered structures, and (v) adjustment of the number of laser pulses, resulting in either a spread of nanoparticles, islands of materials or a complete covering of a surface. Moreover, a variation of PLD, known as Matrix Assisted Pulsed Laser Evaporation, allows for deposition of organic materials, ranging from polymers to proteins and even living cells, otherwise difficult to transfer unaltered in the form of thin films by other techniques. Furthermore, the use of laser light as transfer agent ensures purity of films and pulse-to-pulse deposition allows for an unprecedented control of film thickness at the nm level. This Special Issue is a collection of state-of-the art research papers and reviews in which the topics of interest are devoted to thin film synthesis by PLD and MAPLE, for numerous research and industry field applications, such as bio-active coatings for medical implants and hard, protective coatings for cutting and drilling tools withstanding high friction and elevated temperatures, sensors, solar cells, lithography, magnetic devices, energy-storage and conversion devices, controlled drug delivery and in situ microstructuring for boosting of surface properties.
Download or read book Grain Boundaries and Interfacial Phenomena in Electronic Ceramics written by Lionel M. Levinson and published by . This book was released on 1994 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the November 1990 symposium, held in conjunction with the PAC RIM Meeting, comprise papers organized under five headings: overview (5 papers); ferrites and titanates (13 papers); varistors and conductors (9 papers); high-temperature superconductors (4 papers); and processing and c
Download or read book Optics Letters written by and published by . This book was released on 1995 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deposition of Polypyrrole Thin Films by Advanced Method written by Dušan Kopecký and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new types of electronic devices based on conductive polymers requires precise and controlled deposition of these materials in thin layers. This book examines the latest results in research of deposition of polypyrrole (PPY) thin films by advanced method - Matrix Assisted Pulsed Laser Evaporation (MAPLE). It also provides a brief survey of the laser deposition of conductive polymers, theoretical analysis of the mechanisms of deposition by MAPLE method, definition of both source-PPY properties and deposition conditions necessary for successful thin layer fabrication.
Download or read book Experimental Techniques of Glass Science written by Catherine J. Simmons and published by . This book was released on 1993 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Porous Materials written by Kozo Ishizaki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately four million years of human history has passed. We have been using materials to make a variety of tools. The first materials used were naturally occurring materials such as animal bones, stones, wood etc.; and some of these familiar materials are porous. Porous materials are so familiar that they are sometimes forgotten or ignored. The taste experience of ice cream is created not only by adjusting ingre dients, but also by including air as an ingredient, i.e. pores that give the smooth texture of ice cream. This book is designed to describe and explain about pores, the synthesis of materials with pores (porous materials), and applications of porous materi als. This book is intended for engineers and scientists of different disciplines and specialities, and is expected to be useful in the design and synthesis of porous materials for existing as well as potential new applications. Let us rediscover pores. K. Ishizaki, S. Komameni and M. Nanko January 1998 1 Introduction 1.1 WHAT ARE POROUS MATERIALS? Porous materials are dermed as solids containing pores. Figure 1.1 shows different porous materials. Generally speaking, porous materials have a porosity of 0.2-0.95. The porosity means the fraction of pore volume to the total volume. Porous materials have been used in various applications from daily necessities, such as purifying drinking water by activated carbon or porous ceramics, to uses in modern industries, for example removing dusts from high purity process gases for semiconductor production.
Download or read book Polycrystalline Semiconductors written by Hans J. Möller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the most recent aspects of polycrystalline semiconductors as presented at the conference Polycrystalline Semiconductors - Grain Boundaries and Interfaces. It contains 12 review articles on selected topics written by experts in their fields and 41 complementary contributed papers. The structure, chemistry and physics of grain boundaries and other interfaces are experimentally and theoretically studied. Aspects of the technologically important polycrystalline silicon are discussed in detail. Also covered are other polycrystalline semiconductors, germanium and compound semiconductors, that are currently of interest in fundamental research and in the technology of solar cells and thin film devices. Anyone interested in polycrystalline semiconductors will be able to use this comprehensive collection to advantage. It also suggests directions for new research and development.
Download or read book Pulse Electric Current Synthesis and Processing of Materials written by Zuhair A. Munir and published by Wiley-American Ceramic Society. This book was released on 2006-07-18 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art collection of papers presented at the 6th Pacific Rim Conference on Ceramic and Glass Technology presented in Maui, Hawaii in September of 2005.
Download or read book Physical Vapor Deposition of Thin Films written by John E. Mahan and published by Wiley-Interscience. This book was released on 2000-02-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified treatment of the theories, data, and technologies underlying physical vapor deposition methods With electronic, optical, and magnetic coating technologies increasingly dominating manufacturing in the high-tech industries, there is a growing need for expertise in physical vapor deposition of thin films. This important new work provides researchers and engineers in this field with the information they need to tackle thin film processes in the real world. Presenting a cohesive, thoroughly developed treatment of both fundamental and applied topics, Physical Vapor Deposition of Thin Films incorporates many critical results from across the literature as it imparts a working knowledge of a variety of present-day techniques. Numerous worked examples, extensive references, and more than 100 illustrations and photographs accompany coverage of: * Thermal evaporation, sputtering, and pulsed laser deposition techniques * Key theories and phenomena, including the kinetic theory of gases, adsorption and condensation, high-vacuum pumping dynamics, and sputtering discharges * Trends in sputter yield data and a new simplified collisional model of sputter yield for pure element targets * Quantitative models for film deposition rate, thickness profiles, and thermalization of the sputtered beam
Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Thin Films and Heterostructures for Oxide Electronics written by Satishchandra B. Ogale and published by Springer Science & Business Media. This book was released on 2005-11-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.
Download or read book Practical Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2021-07-14 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which an intense laser beam irradiates the surface of a solid to induce instant local removal of atoms by a thermal or non-thermal mechanism. Through eight chapters of original research studies and literature reviews written by experts from the international scientific community, this book presents theoretical and experimental aspects of the laser ablation phenomenon for processing material including pulsed laser deposition of thin films, laser surface modification, laser machining and laser nanoparticle formation. It also includes a study of the dynamics of plasmas generated by laser ablation of multi-component materials and an overview of laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) techniques for chemical analysis.
Download or read book Film Synthesis and Growth Using Energetic Beams Volume 388 written by H. A. Atwater and published by . This book was released on 1995-10-10 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With over 16 countries represented, this book represents international developments in the field of film synthesis and growth using energetic beams. It focuses on pulsed-laser deposition. Fundamental issues pertaining to the generation of laser ablation plumes, temperature distributions and collisional effects are described. Ion-assisted pulsed-laser deposition, pulsed-ion deposition, applications of hyperthermal beams and aspects of surface dynamics are discussed. The inclusion of an ion beam with the ablation process leads to some unique modifications in the thin-film growth mechanisms, and hence, film properties. Likewise, the collision of high-mass metal cluster ions with substrates shows promise for growth of novel structures. Also featured are new developments of optoelectronic materials, nitrides and carbon films using a variety of techniques. The effects of beam-induced defects on growth and surface morphology, chemical effects during growth, and characterization of film growth and film properties are addressed.
Download or read book Applications of Laser Ablation Thin Film Deposition Nanomaterial Synthesis and Surface Modification written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films Atomic Layer Deposition and 3D Printing written by Kingsley Ukoba and published by CRC Press. This book was released on 2023-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films, Atomic Layer Deposition, and 3D Printing explains the concept of thin films, atomic layers deposition, and the Fourth Industrial Revolution (4IR) with an aim to illustrate existing resources and give a broader perspective of the involved processes as well as provide a selection of different types of 3D printing, materials used for 3D printing, emerging trends and applications, and current top-performing 3D printers using different technologies. It covers the concept of the 4IR and its role in current and future human endeavors for both experts/nonexperts. The book includes figures, diagrams, and their applications in real-life situations. Features: Provides comprehensive material on conventional and emerging thin film, atomic layer, and additive technologies. Discusses the concept of Industry 4.0 in thin films technology. Details the preparation and properties of hybrid and scalable (ultra) thin materials for advanced applications. Explores detailed bibliometric analyses on pertinent applications. Interconnects atomic layer deposition and additive manufacturing. This book is aimed at researchers and graduate students in mechanical, materials, and metallurgical engineering.
