Download or read book Pulsed Laser Deposition of InP Thin Films written by Theodore T. Pekny and published by . This book was released on 1990 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Deposition of Thin Films written by Robert Eason and published by John Wiley & Sons. This book was released on 2007-12-14 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by major contributors to the field, this text summarizes current or newly emerging pulsed laser deposition application areas. It spans the field of optical devices, electronic materials, sensors and actuators, biomaterials, and organic polymers. Every scientist, technologist and development engineer who has a need to grow and pattern, to apply and use thin film materials will regard this book as a must-have resource.
Download or read book Pulsed Laser Deposition and Optical Properties of SBN and SBT Thin Films written by Chunming Jin and published by . This book was released on 1998 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deposition of Polypyrrole Thin Films by Advanced Method written by Dušan Kopecký and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new types of electronic devices based on conductive polymers requires precise and controlled deposition of these materials in thin layers. This book examines the latest results in research of deposition of polypyrrole (PPY) thin films by advanced method - Matrix Assisted Pulsed Laser Evaporation (MAPLE). It also provides a brief survey of the laser deposition of conductive polymers, theoretical analysis of the mechanisms of deposition by MAPLE method, definition of both source-PPY properties and deposition conditions necessary for successful thin layer fabrication.
Download or read book Pulsed Laser Deposition of High Tc Superconducting Thin Films written by Blaine D. Johs and published by . This book was released on 1989 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piezoresistivity of Indium Tin Oxide Thin Films Prepared by Pulsed Laser Deposition written by Hui Fang and published by . This book was released on 2003 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Pulsed Laser Deposition of High Temperature Superconducting Thin Films written by Kenneth Scott and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Deposition and Characterization of Gallium Nitride Thin Films written by Massimo Cazzanelli and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth of Pb2FeO4 Thin Films Via Pulsed Laser Deposition written by Christopher W. Brink and published by . This book was released on 2008 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth and Magnetism of Metallic Thin Films and Multilayers by Pulsed laser Deposition written by and published by . This book was released on 2004 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Deposition of SrBa Nb2O6 Thin Films and Their Properties written by Anna Infortuna and published by . This book was released on 2005 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iridium Thin Films Deposited Via Pulsed Laser Deposition written by Chenglin Chen and published by . This book was released on 2006 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth of Semiconductor Thin Films by Pulsed Laser Deposition written by Yilu Li and published by . This book was released on 2016 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed ultraviolet light from a XeF excimer laser was used to grow thin films of zinc oxide and tin dioxide on (111) p-type silicon wafers within a versatile high vacuum laser deposition system. This pulsed laser deposition system was self-designed and self-built. Parameters such as pressure, target temperature, and distance from the target to the substrate can be adjusted in the system. Scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, Raman spectroscopy and ellipsometry were used to analyze the structures and properties of ZnO and SnO2 thin films. The critical temperature required to fabricate a crystalline ZnO thin film by pulsed laser deposition was found and has been confirmed. For the SnO2 thin film, the critical temperature required to generate a crystalline structure could not be found because of the temperature limit of the substrate heater used in the experiment. In SnO2 thin films, thermal annealing has been used to convert into crystalline structure with (110), (101) and (211) orientations. After fabricating the amorphous SnO2 thin films, they were put into an oven with specific temperatures to anneal them. The minimum annealing temperature range was found for converting the amorphous SnO2 thin films into SnO2 thin films with a crystalline structure. Thermal annealing has also been applied to some amorphous ZnO thin films which were fabricated under the critical temperature required to produce crystalline ZnO thin films. The minimum annealing temperature range for amorphous ZnO thin films was found and only one orientation (002) shown after annealing. Laser annealing technology has also been applied for converting both amorphous ZnO and SnO2 thin films, and results show that this method was not well suited for this attempt. ZnO thin films and SnO2 thin films with a crystalline structure have inportant widely used in industry, for example, application in devices such as solar cells and UV or blue-light-emitting devices. The aim of this research is to help improving the manufacturing process of ZnO and SnO2 thin films.
Download or read book Synthesis and Computer Simulation of Thin Films Grown by Pulsed Laser Deposition written by Wenbiao Jiang and published by . This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of Processes Relevant to Pulsed Laser Deposition of Thin Films written by Ian Weaver and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Ablation written by Ion N. Mihailescu and published by CRC Press. This book was released on 2018-01-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed laser–based techniques for depositing and processing materials are an important area of modern experimental and theoretical scientific research and development, with promising, challenging opportunities in the fields of nanofabrication and nanostructuring. Understanding the interplay between deposition/processing conditions, laser parameters, as well as material properties and dimensionality is demanding for improved fundamental knowledge and novel applications. This book introduces and discusses the basic principles of pulsed laser–matter interaction, with a focus on its peculiarities and perspectives compared to other conventional techniques and state-of-the-art applications. The book starts with an overview of the growth topics, followed by a discussion of laser–matter interaction depending on laser pulse duration, background conditions, materials, and combination of materials and structures. The information outlines the foundation to introduce examples of laser nanostructuring/processing of materials, pointing out the importance of pulsed laser–based technologies in modern (nano)science. With respect to similar texts and monographs, the book offers a comprehensive review including bottom-up and top-down laser-induced processes for nanoparticles and nanomicrostructure generation. Theoretical models are discussed by correlation with advanced experimental protocols in order to account for the fundamentals and underline physical mechanisms of laser–matter interaction. Reputed, internationally recognized experts in the field have contributed to this book. In particular, this book is suitable for a reader (graduate students as well as postgraduates and more generally researchers) new to the subject of pulsed laser ablation in order to gain physical insight into and advanced knowledge of mechanisms and processes involved in any deposition/processing experiment based on pulsed laser–matter interaction. Since knowledge in the field is given step by step comprehensively, this book serves as a valid introduction to the field as well as a foundation for further specific readings.
Download or read book Pulsed Laser Deposition of WOx and FeOx Thin Films written by Andrew J. Caruana and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
