Download or read book Pulsed Ion Beam Surface Modification of Materials written by Richard Marc Fastow and published by . This book was released on 1985 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.

Download or read book Surface modification and alloying by laser ion and electron beams written by J. M. Poate and published by Plenum Pub Corp. This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ion Implantation And Ion Beam Equipmen Proceedings Of The International Conference written by Karpuzov D S and published by #N/A. This book was released on 1991-07-16 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Modification and Characterization Collaborative Research Center at Oak Ridge National Laboratory written by and published by . This book was released on 1986 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 1997 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Technologies Based on Wave and Beam Generated Plasmas written by H. Schlüter and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together three areas of work on plasma technologies: advanced efforts based on wave generated, high frequency plasmas, plasma assisted ion implantation, and electron beam generated plasma. It lays a foundation for the application of sources in industry and various research areas

Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. Provides a broad overview on modern coating and thin film deposition techniques, and their applications Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films Each chapter includes experimental results illustrating various models, mechanisms or theories

Download or read book Materials Processing Technology II written by Lian Cheng Zhao and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 3680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises papers selected from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into sixteen chapters: Thin Films; Surface Engineering/Coatings; Modeling, Analysis and Simulation; Materials Forming; Materials Machining; Welding and Joining; Mechanical Behavior and Fracture; Computer Aided Material Design; Laser Processing Technology; Theory and Application of Friction and Wear; Dynamic Mechanical Analysis, Optimization and Control; Thermal Engineering Theory and Applications; Precision Manufacturing Technology and Measurements; Material Physics and Chemistry; Dynamic Analysis of Processing; Advanced Design Technology.

Download or read book 2nd International Multidisciplinary Microscopy and Microanalysis Congress written by E.K. Polychroniadis and published by Springer. This book was released on 2015-05-05 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd International Multidisciplinary Microscopy and Microanalysis Congress & Exhibition (InterM 2014) was held on 16–19 October 2014 in Oludeniz, Fethiye/ Mugla, Turkey. The aim of the congress was to gather scientists from various branches and discuss the latest improvements in the field of microscopy. The focus of the congress has been widened in an "interdisciplinary" manner, so as to allow all scientists working on several related subjects to participate and present their work. These proceedings include 33 peer-reviewed technical papers, submitted by leading academic and research institutions from over 17 countries and representing some of the most cutting-edge research available. The papers were presented at the congress in the following sessions: · Applications of Microscopy in the Physical Sciences · Applications of Microscopy in the Biological Sciences

Download or read book Special Issues on Magnesium Alloys written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2011-09-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium is the lightest of all the metals and the sixth most abundant on Earth. Magnesium is ductile and the most machinable of all the metals. Magnesium alloy developments have traditionally been driven by requirements for lightweight materials to operate under increasingly demanding conditions (magnesium alloy castings, wrought products, powder metallurgy components, office equipment, nuclear applications, flares, sacrificial anodes for the protection of other metals, flash photography and tools). The biggest potential market for magnesium alloys is in the automotive industry. In recent years new magnesium alloys have demonstrated a superior corrosion resistance for aerospace and specialty applications. Considering the information above, special issues on magnesium alloys are exposed in this book: casting technology; surface modification of some special Mg alloys; protective carbon coatings on magnesium alloys; fatigue cracking behaviors of cast magnesium alloys and also, magnesium alloys biocompatibility as degradable implant materials.

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 1996 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Engineering Materials and Mechanics written by Jong Wan Hu and published by World Scientific. This book was released on 2016-07-14 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICAEMM2016 is an annual international conference that aims to present research outcomes undertaken in applied engineering, materials and mechanics. The book is a collection of 48 selected peer-reviewed articles, organized into three main chapters — advanced materials and power energy theory and studies; management technology and construction engineering applications; and mechanical and hydrology engineering design and applications. This conference brings together scientists, scholars, engineers and students from universities, research institutes and industries all over the world to share their latest research results. The conference also fosters collaboration among organizations and researchers alike in the areas of applied mechanics and materials science. Contents:The Mechanical Properties of SS400C3 Plate by CSP Produced Under the Hot Rolled Pickled Deep Drawing (Y X Liu, Y J Meng, W X Li, X Guan and B Yang)Effect of Extrusion Deformation on Microstructure Evolution of Spray-Formed 7055 Aluminum Alloy (Y Z Xiang, J S Qiao, P J Wang and H Zhang)Innovation Design of Flexible Manipulator by TRIZ (G H Gao and H Wang)Application of TRIZ Contradiction Theory in Innovative Design of the Potted Filling Soil Mechanism (G H Gao and F Li)Institutional Analysis of the Development and Policy on Sino–US Energy on Saving and New Energy Vehicles (W J Wu and L J Zhu)Improved Performance of LiCoO2 Cathode Enabled by Electrode Sputtering Coating with Al2O3 (X Y Dai, Y T Lu, A J Zhou, L P Wang, C Fan and J Z Li)Antimicrobial Finishing of Polyester Fabrics Using Silica Nanoparticles ( Weeranuch Kanjanapiboon, Supakit Achiwawanich, Potjanart Suwanruji and Jantip Setthayanond)Preparation and Characterization of Manganese Dioxide (MnO2) as a Cathode Catalyst for Direct Methanol Fuel Cells (Duangkamon Phuakkhaw, Atchana Wongchaisuwat, Siree Tangbunsuk and Pinsuda Viravathana)Numerical Simulation of the Energy Deposition in the HIPIB Irradiating Process of Ti Target (Ming Gao, Rui Hou, Yong You and Mengru Lv)Research on the Performance of the Offshore-Platform Air Filter Based on the Porous Medium Model (N Ye, T Sun, C-J Sun and Z-W Ma)Analysis of the Reasons Behind the Fracture of the 220kV Pipe Busbar Horizontal Line Clamp (Liu, Z-B Fan and M D Gao)Analysis of Hydrocarbons and Carbon Dioxide Emissions from Diesel Common Rail Engines and Finding the Correlation Between Velocity and Emissions in the Cases of Lancia Thesis and Citroen C4 (Lorenc Malka, Andonaq Londo, Alemayehug Gebremedhin and Klodian Dhoska)Effect of Na2O on Acid Resistance of Alumina-based Ceramic Proppant (J L Ma, B L Wu and T T Wu)The Application of Digital Technologies in Furniture Design (Jun Wang and Zhi Hui Wu)Research on the Bored Pile Construction Technique of Alternating Screw Drills and Percussion Drills (J-Y Shao, X-M Cao and Y-L Song)Research on Construction Technology of Color Steel Plate Roof in Situ Profiling and Installation (S Zhu, H-P Wang and X-X Meng)Study on a Flexible Manipulator Platform (G-H Gap and M Y Song)Effect of Pore Solution Alkalinity of Fly Ash-Cement Mixture on ASTM C 1260/C 1567 Mortar Bar Expansion (C-S Shon and Dan G Zollinger)Effect of Vibration Mixing on Performance of Recycled Concrete (S L Wang, S M Zhang, M M Zhang and W Liu)Research on Mechanical Strength and Residual Stress in Friction Stir Welds of Spatial 3-D Circular Structure (X C Song, F Cui, J S Gao, X S Feng and L J Guo)Cracking Pattern Analysis of Concrete Pavement on Asphalt Stabilized Base and Econo-Crete Base (Q Wang and L Qi)A Review of Coastal Hazard Management Performances (K H Kim and W Agnes)Mode Confusion for Estimating the Longitudinal Thermal Stress of Continuously Welded Rail (R Wang, Z J Yu and L Q Zhu)Investigation of Pore Size Distribution in Cement Paste Using Mercury Intrusion Porosimetry and Backscattered Electron Image Analysis (S X Feng and X G Sun)Impressed Current Cathodic Protection Behavior of Reinforced Concrete Specimen Using MMO Ti-Mesh Anode (J-A Jeong and E-S Jeong)The Unascertained Regression Analysis Method and Its Application in Building Material Sales Prediction (J L Chen and H B Zhang)Research on Inventory Control for Equipment Maintenance Spare Parts (X M Zhang, W Wu and H Z Ren)Impact of Environmental Regulation on Corporate Environmental Investment (Heng Ma and Jun Zhang)Using Frequency Sweep Strain Control to Study the Rheological Properties of Malaysian's Asphalt Binder (Mohammed Hadi Nahi, Ibrahim Kamaruddin, Salah E Zoorob and Madzlan Napiah)Numerical Simulation of Heated Concrete Failure on the Levels of the Meso-Structure (W H Wang and C Wang)Analysis of Warping Deformation of Laser Bracket Based on Moldflow (Weidong Wang, Song Jishun, Chen and Jiangping)Prediction Deterioration of Insulation Process Based on the Partial Discharge Thermal Fluctuation Theory (M N Dubyago, N K Poluyanovich and D V Burkov)A File Storage Service on a Cloud Computing Environment for Digital Libraries (Liu Jing)A Design Procedure for the Hinge System in a Heavy Foldable Container (Y-S Lee, D-K Lee and S-H Yoon)Viable Seismic Strengthening Solutions for RC Wide Beam-Column Joints (A Masi, G Santarsiero, A Mossucca and D Nigro)Optimization of Gas Turbine Fir-Tree Attachment Based on Redesigning the Transition Area with Double-Arc and Spline Curve (H M Zong, H L Tao, Q Gao and C Q Tan)Compensation of the Deformed Ram Spindle of a Horizontal Boring Machine (Y J Chen and J P Hung)Study on Motion Response of Spar Foundation Based on AWQA (K Fan, C H Jiang, H Lv and M Y Guo)Numerical Analysis on the Effects of Shoal on the Ship Wave (K H Kim and J S Seo)Investigation of Characteristics of Wave Induced Currents Using Hydraulic Model Experiment (K H Kim and J S Seo)The Design and Application of Motion Control System Based on PLCopen Standard (F S Li)Dye-Sensitized Solar Cells Using Liquid Phase Deposition Titania Thin Films (H J Chen, D T Kong, N Wang and H C He)Chebyshev Cardinal Functions for Solving Obstacle Boundary Value Problems (Zakieh Avazzadeh and Mohammad Heydari)Experimental Study on Linear Pressure Loss of Spray Hose (Y Gong, X Zhang, G Wang, X Chen, D J Liu and L Pei)MEMS Based Device for Steering Wheel Angle Experimental Measuring (Radu Drosescu and Silviu Zamfir)Mechanical Property Changes of KNO3 Salt Bath Nitrided Duplex Stainless Steel (Jamshid D Schurdjanov and I S Kim)Wastewaters Treatment and Drinking Water Purification with Complex Automated Electrolysis Unit (E Arakcheev, M Brunman, A Konyashin, V Brunman and A Petkova)Development and Application of Comprehensive Drought Evaluation Model for Irrigation District in North China (J Q Ma, Z W Zhang and R Weis) Readership: Academics, professionals, postgraduate and graduate students in materials engineering, materials science and applied mechanics.

Download or read book Electron Ion Plasma Modification of a Hypoeutectoid Al Si Alloy written by Dmitrii Zaguliaev and published by CRC Press. This book was released on 2020-09-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Ion-Plasma Modification of a Hypereutectic Al-Si Alloy details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials. The authors summarize and analyze more than 10 years of research on the electron-ion-plasma effect on strength properties and structure-phase states’ transformations of hypoeutectic Silumin. Key Features: Details physical and mathematical models of mechanisms of surface layer hardening under conditions of varying energy effects Offers insights into improved strength characteristics of Silumin Explores optimal processing modes for increased strength and improved tribological characteristics This book is a valuable resource to researchers and engineers involved with the modification of light alloy surfaces for the automotive and aeronautical industry.

Download or read book Eco Materials Processing Design VII written by Hyung Sun Kim and published by Trans Tech Publications Ltd. This book was released on 2006-03-15 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection offers materials researchers and end-users a wealth of new knowledge encompassing the whole spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and materials related to energy conversion.