Download or read book Pulsed Corona Plasma Technology for Treating VOC Emissions from Pulp Mills written by Alexander A. Fridman and published by . This book was released on 2004 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the DOE Office of Industrial Technologies Forest Products program various plasma technologies were evaluated under project FWP 49885 ''Experimental Assessment of Low-Temperature Plasma Technologies for Treating Volatile Organic Compound Emissions from Pulp Mills and Wood Products Plants''. The heterogeneous pulsed corona discharge was chosen as the best non-equilibrium plasma technology for control of the vent emissions from HVLC Brownstock Washers. The technology for removal of Volatile Organic Compounds (VOCs) from gas emissions with conditions typical of the exhausts of the paper industry by means of pulsed corona plasma techniques presented in this work. For the compounds of interest in this study (methanol, acetone, dimethyl sulfide and? -pinene), high removal efficiencies were obtained with power levels competitive with the present technologies for the VOCs removal. Laboratory experiments were made using installation with the average power up to 20 W. Pilot plant prepared for on-site test has average plasma power up to 6.4 kW. The model of the Pilot Plant operation is presented.
Download or read book Plasma Assisted Decontamination of Biological and Chemical Agents written by Selçuk Güçeri and published by Springer Science & Business Media. This book was released on 2011-10-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma decontamination is a rapidly expanding area of modern science and engineering. An increasing number of engineers are using plasma methods for decontamination of chemical and biological agents. Plasma decontamination is effectively applied today to clean and sterilize different surfaces, high volume air and water streams, industrial exhausts, and even living tissue of animals and humans. This book provides a fundamental introduction to virtually all aspects of modern plasma decontamination, as well as the most recent technological achievements in the area. The book is segmented into four specific sections of modern plasma decontamination: (1) plasma bio-decontamination, including disinfection and sterilization of surfaces, water and air streams; (2) plasma decontamination of chemical agents, including cleaning of air, water, and industrial exhaust gases from different pollutants and especially volatile organic compounds VOC; (3) plasma treatment of living tissue, including different subjects of plasma medicine from skin sterilization to tissue engineering; (4) major electric discharges applied for the plasma-assisted decontamination of chemical and biological agents.
Download or read book Plasma Chemistry written by Alexander Fridman and published by Cambridge University Press. This book was released on 2008-05-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a fundamental introduction to all aspects of modern plasma chemistry, this book describes mechanisms and kinetics of chemical processes in plasma, plasma statistics, thermodynamics, fluid mechanics and electrodynamics, as well as all major electric discharges applied in plasma chemistry. Fridman considers most of the major applications of plasma chemistry, from electronics to thermal coatings, from treatment of polymers to fuel conversion and hydrogen production and from plasma metallurgy to plasma medicine. It is helpful to engineers, scientists and students interested in plasma physics, plasma chemistry, plasma engineering and combustion, as well as chemical physics, lasers, energy systems and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics and numerical formulas for practical calculations related to specific plasma-chemical processes and applications. Problems and concept questions are provided, helpful in courses related to plasma, lasers, combustion, chemical kinetics, statistics and thermodynamics, and high-temperature and high-energy fluid mechanics.
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Download or read book 17th International Symposium on Plasma Chemistry written by Javad T. Mostaghimi and published by . This book was released on 2005 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Science and Technology written by Alexander Fridman and published by John Wiley & Sons. This book was released on 2024-02-05 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Technology An accessible introduction to the fundamentals of plasma science and its applications In Plasma Science and Technology: Lectures in Physics, Chemistry, Biology, and Engineering, distinguished researcher Dr. Alexander Fridman delivers a comprehensive introduction to plasma technology, including fulsome descriptions of the fundamentals of plasmas and discharges. The author discusses a wide variety of practical applications of the technology to medicine, energy, catalysis, coatings, and more, emphasizing engineering and science fundamentals. Offering readers illuminating problems and concept questions to support understanding and self-study, the book also details organic and inorganic applications of plasma technologies, demonstrating its use in nature, in the lab, and in both novel and well-known applications. Readers will also find: A thorough introduction to the kinetics of excited atoms and molecules Comprehensive explorations of non-equilibrium atmospheric pressure cold discharges Practical discussions of plasma processing in microelectronics and other micro-technologies Expert treatments of plasma in environmental control technologies, including the cleaning of air, exhaust gases, water, and soil Perfect for students of chemical engineering, physics, and chemistry, Plasma Science and Technology will also benefit professionals working in these fields who seek a contemporary refresher in the fundamentals of plasma science and its applications.
Download or read book Plasma Medicine written by Alexander Fridman and published by John Wiley & Sons. This book was released on 2012-12-19 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text is suitable for researchers and graduate students of a ‘hot’ new topic in medical physics. Written by the world’s leading experts, this book aims to present recent developments in plasma medicine, both technological and scientific, reviewed in a fashion accessible to the highly interdisciplinary audience consisting of doctors, physicists, biologists, chemists and other scientists, university students and professors, engineers and medical practitioners. The book focuses on major topics and covers the physics required to develop novel plasma discharges relevant for medical applications, the medicine to apply the technology not only in-vitro but also in-vivo testing and the biology to understand complicated bio-chemical processes involved in plasma interaction with living tissues.
Download or read book Evaluation of Pilot Scale Pulse Corona Induced Plasma Device to Remove NOx from Combustion Exhausts from a Subscale Combustor and from a Hush House at Nellis AFB Nevada written by Sheila Haythornthwaite and published by . This book was released on 1997 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jet engine test cells (JETCs) are used to test-fire new, installed, and reworked jet engines. Because JETCs have been classified as stationary sources of pollutant emissions, they are subject to possible regulation under Title I of the Clean Air Act (CAA) as amended in 1990. In Phase I of the Small Business Innovation Research (SBIR) program, a novel NOx-control approach utilizing pulsed-corona-induced plasma successfully showed 90% removal of NOx in the laboratory. The objective of Phase II was to reproduce the laboratory-scale results in a pilot-scale system. The technology was successfully demonstrated at pilot scale in the field, on a slipstream of JETC flue gas at Nellis Air Force Base. Based on the field data, cost projections were made for a system to treat the full JETC exhaust. The technology efficiently converted NO into ONO, and a wet scrubber was required to achieve the treatment goal of 50-percent removal and destruction of NOx. The plasma simultaneously removes hydrocarbons from the flue gas stream. This project demonstrated that pulse-corona-induced plasma technology is scalable to practical industrial dimensions.
Download or read book Removal of Volatile Organic Compounds VOCs by Atmospheric Pressure Dielectric Barrier and Pulsed Corona Electrical Discharges written by and published by . This book was released on 1999 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, interest in gas-phase pollution control has greatly increased, arising from a greater respect for the environment, more attention to the impact of environmental pollution, and a larger body of regulations. A promising set of methods now being applied to gas-phase pollution abatement is non-thermal plasma (NTP) technologies. These plasmas are useful for generating highly reactive species (e.g., free radicals) which readily decompose entrained pollutants in atmospheric-pressure gas streams. Such plasmas can generate both oxidative and reductive radicals showing promise for treating a wide variety of pollutants, in some cases simultaneously decomposing multiple species. In this chapter, we will discuss the removal of gas-phase volatile organic compounds (VOCs) by two types of electric-discharge-driven NTPs: dielectric-barrier (silent) discharges and pulsed corona discharges. These two types of discharges are easily operated at atmospheric pressure or above, thereby having a high process throughput compared to low-pressure NTPs.
Download or read book Monitoring Control and Effects of Air Pollution written by Andrzej Chmielewski and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the subjects related to the selected aspects of pollutants emission, monitoring and their effects. The most of recent publications concentrated on the review of the pollutants emissions from industry, especially power sector. In this one emissions from opencast mining and transport are addressed as well. Beside of SOx and NOx emissions, small particles and other pollutants (e.g. VOC, ammonia) have adverse effect on environment and human being. The natural emissions (e.g. from volcanoes) has contribution to the pollutants concentration and atmospheric chemistry governs speciation of pollutants, as in the case of secondary acidification. The methods of ambient air pollution monitoring based on modern instrumentation allow the verification of dispersion models and balancing of mass emissions. The comfort of everyday human's activity is influenced by indoor and public transport vehicles interior air contamination, which is effected even by the professional appliances operation. The outdoor pollution leads to cultural heritage objects deterioration, the mechanism are studied and the methods of rehabilitation developed. However to prevent emissions the new technologies are being developed, the new class of these technologies are plasma processes, which are briefly reviewed at the final part of the book.
Download or read book Non Thermal Plasma Techniques for Pollution Control written by Bernie M. Penetrante and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acid rain, global warming, ozone depletion, and smog are preeminent environmental problems facing the world today. Non-thermal plasma techniques offer an innovative approach to the solution of some of these problems. There are many types of non-thermal plasma devices that have been developed for environmental applications. The potential of these devices for the destruction of pollutants or toxic molecules has already been demonstrated in many contexts, such as nitrogen oxides (NOX) and sulfur dioxide (SO2) in flue gases, heavy metals and volatile organic compounds (VOCs) in industrial effluents, and chemical agents such as nerve gases. This book contains a comprehensive account of the latest developments in non-thermal plasma devices and their applications to the disposal of a wide variety of gaseous pollutants.
Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.
Download or read book Plasma Chemistry and Catalysis in Gases and Liquids written by Vasile I. Parvulescu and published by John Wiley & Sons. This book was released on 2012-07-10 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a book that covers not only plasma in gases but also in liquids, this is all set to become the standard reference for this topic. It provides a broad-based overview of plasma-chemical and plasmacatalytic processes generated by electrical discharges in gases, liquids and gas/liquid environments in both fundamental and applied aspects by focusing on their environmental and green applications and also taking into account their practical and economic viability. With the topics addressed by an international group of major experts, this is a must-have for scientists, engineers, students and postdoctoral researchers specializing in this field.
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. Examines the topic of cold plasma technology for food applications Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
Download or read book Non Equilibrium Air Plasmas at Atmospheric Pressure written by K.H. Becker and published by CRC Press. This book was released on 2004-11-29 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atmospheric-pressure plasmas continue to attract considerable research interest due to their diverse applications, including high power lasers, opening switches, novel plasma processing applications and sputtering, EM absorbers and reflectors, remediation of gaseous pollutants, excimer lamps, and other noncoherent light sources. Atmospheric-pressure plasmas in air are of particular importance as they can be generated and maintained without vacuum enclosure and without any additional feed gases. Non-Equilibrium Air Plasmas at Atmospheric Pressure reviews recent advances and applications in the generation and maintenance of atmospheric-pressure plasmas. With contributions from leading international researchers, the coverage includes advances in atmospheric-pressure plasma source development, diagnostics and characterization, air plasma chemistry, modeling and computational techniques, and an assessment of the status and prospects of atmospheric-pressure air plasma applications. The extensive application sections make this book attractive for practitioners in many fields where technologies based on atmospheric-pressure air plasmas are emerging.
Download or read book The Modern Problems of Electrostatics with Applications in Environment Protection written by Ion I. Inculet and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Bucharest, 9-12 November, 1998
Download or read book Air Pollution and Greenhouse Gases written by Zhongchao Tan and published by Springer. This book was released on 2016-09-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook discusses engineering principles relating to air pollution and greenhouse gases (GHGs); it focuses on engineering principles and designs of related devices and equipment for air emission control for a variety of industries such as energy, chemical, and transportation industries. The book aims primarily at senior undergraduate and graduate students in mechanical, chemical and/or environmental engineering departments; it can also be used as a reference book by technical staff and design engineers who are interested in and need to have technical knowledge in air pollution and GHGs. The book is motivated by recent rapid advances in air pollution and greenhouse gas emissions and their control technologies. In addition to classic topics related to air pollution, this book is also featured with emerging topics related to air pollution and GHGs. It covers recent advances in engineering approaches to the reduction of GHG emissions including, but are not limited to, green energy technologies and carbon sequestration and storage. It also introduces an emerging topic in air pollution, which is referred to as Nano Air Pollution. It is a growing concern in air pollution, but largely missing in similar books, likely because of recent rapid advances in nanotechnology has outpaced the advances in nano air pollution control.
