Download or read book Pull Production for the Shopfloor written by Productivity Press Development Team and published by CRC Press. This book was released on 2017-07-27 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a "pull" production system, the final process pulls needed parts from the previous process, which pulls from the process before it, and so on, as determined by customer demand. This allows you to operate without preset schedules and avoid unnecessary costs, wastes, and delays on the manufacturing floor.Pull Production for the Shopfloor introduce

Download or read book All About Pull Production written by Christoph Roser and published by Allaboutlean.com Publishing. This book was released on 2021-04-03 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: All About Pull Production is a practical guide for anyone looking to implement pull systems. It focuses on practical application and values functionality over theory, albeit it explains the underlying relations. It is not a high-level philosophical discussion of lean, but a book to help you roll up your sleeves and get the job done. It is written for the practitioner. If you are working in production or logistics and want to implement pull, then this book is for you. It also serves as a useful reference for students and researchers of lean manufacturing. With a foreword by John Shook. Praise for All About Pull Production "This book provides you the means to create supply systems for the rapidly evolving complexities of the twenty-first century, anywhere, in any industry."-John Shook, Chairman, Lean Global Network "Prof. Roser is the go-to source for anything about lean. With this comprehensive book on pull production he has written an authoritative work. Highly recommended for anyone interested in getting to the heart of Toyota's pull principle."-Dr. Torbjørn Netland, Professor of Production and Operations Management, ETH Zürich "This book explains pull production very well and in an excellent style. The book definitely demystifies pull. Without doubt, the book will be the go-to guide for both beginners and experienced practitioners."-Cheong Tsang, Bosch Plant Manager (Retired) "Readers will definitely obtain a lot of valuable insights and new ideas from this book on pull production."-Dr. Masaru Nakano, Professor, Keio University; Former Toyota Manager "This is by far the best in-depth exploration of pull. It is amazingly comprehensive, including warnings, common errors, and applicability of various pull systems. I am sure that it will become THE standard reference book on pull systems."-Dr. John Bicheno, Emeritus Professor of Lean Enterprise, University of Buckingham "This book presents pull production control in a comprehensive and practice-oriented way for students and practitioners alike."-Dr.-Ing. Jochen Deuse, Professor, Head of Institute of Production Systems, TU Dortmund University; Director Centre for Advanced Manufacturing, University of Technology Sydney "The book provides well structured, in-depth insights in the application of pull systems, from Kanban to less-known but powerful alternatives. The book is a valuable source for students and practitioners in industry, from lean experts to production managers."-Dr.-Ing. Ralph Richter, Former Head of the Bosch Production System and Plant Manager at Bosch "With this deeply researched and considered book, Prof. Roser goes beyond the simple explanations of pull to reveal pull production in its compelling simplicity. The results provide a convincing case and trusty guide."-Peter Willats, Professor, University of Buckingham, Co-Founder, Kaizen Institute of Europe "Anyone considering a pull system should read this book."-Mark Warren, Manufacturing Engineer and Production Historian "What you have put together in this book is amazing-this may become your magnum opus in due course! It's going to be a great reference resource for practitioners and academics."-Dr. Rajan Suri, Emeritus Professor of Industrial Engineering, University of Wisconsin-Madison, Inventor of POLCA "This book is excellent material for understanding and using pull production. It is very informative and written in a very polite and pleasant personal style with good reflections and clarifications."-Dr. Björn Johansson, Professor of Sustainable Production, Chalmers University of Technology, Sweden

Download or read book Standard Work for the Shopfloor written by 0 Productivity Press Development Team, and published by CRC Press. This book was released on 2024-11-01 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard work is an agreed upon set of work procedures that effectively combines people, materials, and machines to maintain quality, efficiency, safety, and predictability. Work is described precisely in terms of cycle time, work in process, sequence, time, layout, and the inventory needed to conduct the activity. Standard work begins as an improvement baseline and evolves into a reliable method. It establishes the best activities and sequence steps to maximize performance and minimize waste. In this book you will learn about: The characteristics of standards Key benefits and applications of standardization Standard work concepts and calculations Standard work steps and documentation Using standard work manuals, charts, and worksheets Cell staffing (line balancing and full work) Productivity's Shopfloor Series books offer a simple, cost-effective approach for building basic knowledge about key manufacturing improvement topics. Like all our Shopfloor Series books, Standard Work for the Shopfloor includes innovative instructional features that are the signature of the Shopfloor Series. The goal: to place powerful and proven improvement tools such as pull production techniques in the hands of your entire workforce.

Download or read book Cellular Manufacturing written by ProductivityDevelopmentTeam and published by Routledge. This book was released on 2018-02-02 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular Manufacturing: One-Piece Flow for Workteams introduces production teams to basic cellular manufacturing and teamwork concepts and orients them for participating in the design of a new production cell. Use this book to get everyone on board to reduce lead time, work-in-process inventory, and other profit-draining wastes. Each chapter includes an overview and a summary to reinforce concepts, as well as reflection questions, which can be used to encourage group discussions. This volume is part of Productivity Press’ Shopfloor Series, which offers a simple, cost-effective approach for building basic knowledge about key manufacturing improvement topics

Download or read book Kanban for the Shopfloor written by Productivity Press Development Team and published by CRC Press. This book was released on 2020-06-29 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kanban is the name given to the inventory control card used in a pull system. The primary benefit of kanban is to reduce overproduction, the worst of the seven deadly wastes. A true kanban system produces exactly what is ordered, when it is ordered, and in the quantities ordered. It is essentially a dynamic work order that moves with the material. Each kanban identifies the part or subassembly unit and indicates where each one came from and where each is going. Used this way, kanban acts as a system of information that integrates your plant, connects all processes one to another, and connects the entire value stream to customer demand. Kanban for the Shopfloor provides a working manual for those seeking to implement this method of production control in any operation. It defines the various terms and methods employed in kanbans, and illustrates how when adhered to, kanban is an element of continuous improvement that ultimately leads to the ideal of one-piece flow." In addition to reducing the waste of overproduction, kanban will help your company increase flexibility to respond to customer demand, coordinate production of small lots and wide product variety, and simplify the procurement process. About the Shopfloor Series: Put proven improvement tools in the hands of your entire workforce! Progressive shopfloor improvement techniques are imperative for manufacturers who want to stay competitive and to achieve world class excellence. And it's the comprehensive education of all shopfloor workers that ensures full participation and success when implementing new programs. The Shopfloor Series books make practical information accessible to everyone by presenting major concepts and tools in simple, clear language and at a reading level that has been adjusted for operators by skilled instructional designers. One main idea is presented every two to four pages so that the book can be picked up and put down easily. Each chapter begins with an overview and ends with a summary section. Helpful illustrations are used throughout. Other topics in the Shopfloor Series: Kanban, 5S, Quick Changeover, Mistake-Proofing, Just-in-Time, TPM, Cellular Manufacturing

Download or read book Creating Level Pull written by Art Smalley and published by Lean Enterprise Institute. This book was released on 2004 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Creating Level Pull workbook shows you how to advance a lean transformation from a focus on isolated improvements to improving the entire plantwide production system by implementing a lean production control system. "The workbook is unique because it is a step-by-step case study on how to implement a level, pull-based production control system," said author Art Smalley. This is a new step towards 'system kaizen that is not yet well understood outside of Toyota.The lean efforts at most companies focus on "point kaizen" (e.g., reducing set up times, implementing 5S, etc.) that improves a small portion of the value stream running from raw materials to finished products. Or they focus on "flow kaizen" that improves the entire value stream for one product family. Creating Level Pull shows how companies can make the leap to "system kaizen" by introducing a lean production control system that ties together the flows of information and materials supporting every product family in a facility. With this system in place, each production activity requests precisely the materials it needs from the previous activity and demand from the customer is levelled to smooth production activities throughout the plant.[Source : 4e de couv.].

Download or read book Kaizen for the Shop Floor written by Productivity Press Development Team and published by CRC Press. This book was released on 2002-02-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The philosophy of kaizen, which simply means continuous improvement, needs to adopted by any organization seeking to implement lean improvements that go beyond cost cutting. Kaizen events are opportunities to make focused changes in the workplace. Kaizen for the Shopfloor takes readers through the critical steps for conducting a very effective kaizen event: one that is well planned, well implemented, and well documented. As the newest addition to the Shingo Prize Winning Shopfloor Series, Kaizen for the Shopfloor distills the complexities of jump starting lean processes into an easily accessible format for those frontline employees who make lean possible. About the Shopfloor Series: Put proven improvement tools in the hands of your entire workforce! Progressive shopfloor improvement techniques are imperative for manufacturers who want to stay competitive and to achieve world class excellence. And it's the comprehensive education of all shopfloor workers that ensures full participation and success when implementing new programs. The Shopfloor Series books make practical information accessible to everyone by presenting major concepts and tools in simple, clear language and at a reading level that has been adjusted for operators by skilled instructional designers. One main idea is presented every two to four pages so that the book can be picked up and put down easily. Each chapter begins with an overview and ends with a summary section. Helpful illustrations are used throughout.

Download or read book Making materials flow written by Rick Harris and published by Lean Enterprise Institute. This book was released on 2003 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Management written by Yacob Khojasteh and published by Taylor & Francis. This book was released on 2017-11-07 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inventory control is an essential task in production management. An effective inventory control can significantly reduce the holding cost and hence, total production cost. Selecting and implementing a suitable production control system plays an important role in inventory reduction and performance improvement of a production system. Since the introduction of Toyota’s just-in-time philosophy, pull control systems have been adopted by numerous companies worldwide, both in the manufacturing and service sectors. This book provides some recent developments in production management and presents modeling and analysis tools for pull production control systems. It contributes by combining theoretical findings and case study analysis results with a practical and contemporary view on how to effectively manage and control production systems. Each chapter in this book focuses on a specific topic in production control systems, allowing readers to identify the chapters that relate to their interests. More specifically, the book is presented in three sections. The first section focuses on the design and implementation aspects of the pull production control systems, as well as performance evaluation approaches for pull systems. The second section presents a recent and comprehensive literature review. Three different case studies on implementation of pull production control systems are presented in the last section. This book can be used as an essential source for students and scholars who need to specifically study the pull control systems. Since the superiority of these systems is controversial, the book can also provide an interesting and informative read for practitioners, managers, and employees who need to deepen their knowledge on pull production management systems.

Download or read book Fast Track to Waste Free Manufacturing written by John W. Davis and published by CRC Press. This book was released on 2020-03-12 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing in the United States is currently undergoing a major transition, yet large numbers of manufacturers simply do not recognize what it is all about. Many still operate under out dated manufacturing practices and do not see that the enemy is not the competition, but rather their own system of production.

Download or read book Pull Production for the Shopfloor written by and published by . This book was released on 2005 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creating Continuous Flow written by Mike Rother and published by Lean Enterprise Institute. This book was released on 2001-12 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workbook explains in simple, step-by-step terms how to introduce and sustain lean flows of material and information in pacemaker cells and lines, a prerequisite for achieving a lean value stream.A sight we frequently encounter when touring plants is the relocation of processing steps from departments (process villages) to product-family work cells, but too often these "cells" produce only intermittent and erratic flow. Output gyrates from hour to hour and small piles of inventory accumulate between each operation so that few of the benefits of cellularization are actually being realized; and, if the cell is located upstream from the pacemaker process, none of the benefits may ever reach the customer.This sequel to Learning to See (which focused on plant level operations) provides simple step-by-step instructions for eliminating waste and creating continuous flow at the process level. This isn't a workbook you will read once then relegate to the bookshelf. It's an action guide for managers, engineers, and production associates that you will use to improve flow each and every day.Creating Continuous Flow takes you to the next level in work cell design where you'll achieve even greater cost and lead time savings. You'll learn: where to focus your continuous flow efforts, how to create much more efficient work cells and lines, how to operate a pacemaker process so that a lean value stream is possible, how to sustain the gains, and keep improving.Creating Continuous Flow is the next logical step after Learning to See. The value-stream mapping process defined the pacemaker process and the overall flow of products and information in the plant. The next step is to shift your focus from the plant to the process level by zeroing in on the pacemaker process, which sets the production rhythm for the plant or value stream, and apply the principles of continuous flow.Every production facility has at least one pacemaker process. The pacemaker processes is usually where products take their final form before going to external customers. It’s called the pacemaker because how you operate here determines both how well you can serve the customer and what the demand pattern is like for your upstream supplying processes.How the pacemaker process operates is critically important. A steady and consistently flowing pacemaker places steady and consistent demands on the rest of the value stream. The continuous flow processing that results allows companies to create leaner value streams.[Source : 4e de couv.]

Download or read book Lean Production for Competitive Advantage written by John Nicholas and published by CRC Press. This book was released on 2015-10-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Lean concepts and principles described in this book have revolutionized manufacturing practice and business conduct in a manner similar to what Henry Ford’s system did for mass manufacturing. Lean production however, involves much more than the adoption of methods and procedures, it requires a change in management philosophy that emphasizes relationship building, trust, and responsibility being conferred to frontline workers and suppliers. Based on three decades of teaching experience, Lean Production for a Competitive Advantage: A Comprehensive Guide to Lean Methodologies and Management Practices introduces the Lean philosophy and illustrates the effective application of Lean tools with real-world case studies. From fundamental concepts to integrated planning and control in pull production and the supply chain, the text provides a complete introduction to Lean production. Coverage includes small batch production, setup reduction, pull production, preventive maintenance, standard operations, as well as synchronizing and scheduling lean operations. Detailing the key principles and practices of Lean production, the text also: Illustrates effective implementation techniques with case studies from a range of industries Includes questions and completed problems in each chapter Explains how to effectively partner with suppliers and employees to accomplish productivity goals Designed for students who have a basic foundation in production and operations management, the text provides a thorough understanding of the fundamental principles of Lean. It also offers practical know-how for implementing a culture of continuous improvement on the shop floor or in the office, creating a heightened sense of responsibility and pride in all stakeholders involved, and enhancing productivity and efficiency to improve the bottom line. Instructor’s material available – please contact: [email protected] or call 1-800-634-7064 to request these materials.

Download or read book Factory Physics written by Wallace J. Hopp and published by McGraw-Hill/Irwin. This book was released on 2001 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book It s About Time written by Rajan Suri and published by CRC Press. This book was released on 2010-03-31 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the publication of Rajan Suri’s landmark book, Quick Response Manufacturing, the innovative principles of QRM have been proven with impressive results at many companies, big and small, in a variety of industries. While the key principles of QRM remain unchanged, after a decade of teaching QRM workshops to senior executives, Suri has developed a clear, concise, and accessible method of presenting QRM strategy using four core concepts: 1. The Power of Time – the huge impact time has on your entire enterprise 2. Organization Structure – how to structure your organization to reduce lead times 3. System Dynamics – understanding how interactions between jobs and resources impact time to make better decisions on capacity, lot sizes, and similar issues 4. Enterprise-Wide Application – QRM is not just a shop floor strategy, it extends across your whole enterprise including material planning and control, supply management, office operations, and new product introduction Presenting new case studies on QRM implementation, It's About Time: The Competitive Advantage of Quick Response Manufacturing illustrates how QRM can not only reduce lead times but also improve quality, reduce operating costs, and enable companies to gain substantial market share. This practical reference explains how factories in advanced nations can use QRM strategy to compete with manufacturers in low-wage countries. In addition, it provides helpful pointers for QRM implementation, including accounting strategies, novel cost-justification approaches, and a stepwise process for implementation. Also included are downloadable resources with five appendices that provide a number of practical details to assist in the success of your QRM implementation. When you are ready to start implementing QRM, you will find that these appendices contain time-saving tips to help you work through implementation issues¿including simple calculation methods and tools to support the design of your QRM strategy. You can also access these Appendices on the Downloads and updates tab on https://www.crcpress.com/9781439805961. The author, Rajan Suri, recently became one of only 10 people to be inducted into Industry Week's 2010 Manufacturing Hall of Fame.

Download or read book Kanban Just in Time at Toyota written by Japan Management Association and published by CRC Press. This book was released on 1986-04-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toyota's world-renowned success proves that just-in-time (JIT) makes other manufacturing practices obsolete. This simple but powerful book is based on the seminars given by Taiichi Ohno and other senior production staff to introduce Toyota's own supplier companies to JIT. It teaches the philosophy and implementation of what many call the most efficient production system in the world. Provides a clear structure for an introductory JIT training program. Explains every aspect of the JIT system, including how to set it up and how to refine it once it's in place. Shows how to use a simple visual system to control the production process. Every day more American companies are learning that JIT works outside Japan. Now you can get started with this step-by-step book which guides you through the implementation process. Every engineer, manager, supervisor, and worker should read this book to get the clearest, simplest, and most complete introduction to JIT available in English. Results at American companies after reading this book: Lead-time on one product was reduced from 12 weeks to 4 days. Setup time on a large blanking press was reduced from eight hours to one minute and four seconds. Work-in-process has been reduced 50 percent plant-wide. Factory floor space was opened up 30 to 40 percent in every on of their plants.

Download or read book Quick Response Manufacturing written by Rajan Suri and published by CRC Press. This book was released on 2020-10-28 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the author and now being employed by a number of businesses, Quick Response Manufacturing (QRM) is an expansion of time-based competition, aimed at a single target with the goal of reducing lead times. The key difference between QRM and other time-based programs is that QRM covers an entire organization, from the shop floor to the office, to sales and beyond. Providing guidelines for establishing a QRM enterprise, this volume builds upon kaizen, TQM, TPM, and other practice to help organizations streamline all functions of their operation. It shows how to quickly introduce products, along with ways to rethink materials and production management.