Download or read book Electronic Materials written by Yuriy M. Poplavko and published by Elsevier. This book was released on 2018-11-23 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and thermal properties are reviewed and electrical and magnetic properties are emphasized. Basics of symmetry and internal structure of crystals and the main properties of metals, dielectrics, semiconductors, and magnetic materials are discussed. The theory and modern experimental data are presented, as well as the specifications of materials that are necessary for practical application in electronics. The modern state of research in nanophysics of metals, magnetic materials, dielectrics and semiconductors is taken into account, with particular attention to the influence of structure on the physical properties of nano-materials. The book uses simplified mathematical treatment of theories, while emphasis is placed on the basic concepts of physical phenomena in electronic materials. Most chapters are devoted to the advanced scientific and technological problems of electronic materials; in addition, some new insights into theoretical facts relevant to technical devices are presented. Electronic Materials is an essential reference for newcomers to the field of electronics, providing a fundamental understanding of important basic and advanced concepts in electronic materials science. Provides important overview of the fundamentals of electronic materials properties significant for device applications along with advanced and applied concepts essential to those working in the field of electronics Takes a simplified and mathematical approach to theories essential to the understanding of electronic materials and summarizes important takeaways at the end of each chapter Interweaves modern experimental data and research in topics such as nanophysics, nanomaterials and dielectrics

Download or read book Intelligent Electronic Devices written by Teen-Hang Meen and published by MDPI. This book was released on 2020-05-20 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a modern technological society, electronic engineering and design innovations are both academic and practical engineering fields that involve systematic technological materialization through scientific principles and engineering designs. Engineers and designers must work together with a variety of other professionals in their quest to find systems solutions to complex problems. Rapid advances in science and technology have broadened the horizons of engineering while simultaneously creating a multitude of challenging problems in every aspect of modern life. Current research is interdisciplinary in nature, reflecting a combination of concepts and methods that often span several areas of mechanics, mathematics, electrical engineering, control engineering, and other scientific disciplines. In addition, the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019 (IEEE ICKII 2019) was held in Seoul, South Korea, on 12–15 July, 2019. This book, “Intelligent Electronic Devices”, includes 13 excellent papers form 260 papers presented in this conference about intelligent electronic devices. The main goals of this book were to encourage scientists to publish their experimental and theoretical results in as much detail as possible and to provide new scientific knowledge relevant to the topics of electronics.

Download or read book The Art of Electronics written by Paul Horowitz and published by . This book was released on 2021 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Electronics for Inventors 2 E written by Paul Scherz and published by McGraw Hill Professional. This book was released on 2006-12-05 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE BOOK THAT MAKES ELECTRONICS MAKE SENSE This intuitive, applications-driven guide to electronics for hobbyists, engineers, and students doesn't overload readers with technical detail. Instead, it tells you-and shows you-what basic and advanced electronics parts and components do, and how they work. Chock-full of illustrations, Practical Electronics for Inventors offers over 750 hand-drawn images that provide clear, detailed instructions that can help turn theoretical ideas into real-life inventions and gadgets. CRYSTAL CLEAR AND COMPREHENSIVE Covering the entire field of electronics, from basics through analog and digital, AC and DC, integrated circuits (ICs), semiconductors, stepper motors and servos, LCD displays, and various input/output devices, this guide even includes a full chapter on the latest microcontrollers. A favorite memory-jogger for working electronics engineers, Practical Electronics for Inventors is also the ideal manual for those just getting started in circuit design. If you want to succeed in turning your ideas into workable electronic gadgets and inventions, is THE book. Starting with a light review of electronics history, physics, and math, the book provides an easy-to-understand overview of all major electronic elements, including: Basic passive components o Resistors, capacitors, inductors, transformers o Discrete passive circuits o Current-limiting networks, voltage dividers, filter circuits, attenuators o Discrete active devices o Diodes, transistors, thrysistors o Microcontrollers o Rectifiers, amplifiers, modulators, mixers, voltage regulators ENTHUSIASTIC READERS HELPED US MAKE THIS BOOK EVEN BETTER This revised, improved, and completely updated second edition reflects suggestions offered by the loyal hobbyists and inventors who made the first edition a bestseller. Reader-suggested improvements in this guide include: Thoroughly expanded and improved theory chapter New sections covering test equipment, optoelectronics, microcontroller circuits, and more New and revised drawings Answered problems throughout the book Practical Electronics for Inventors takes you through reading schematics, building and testing prototypes, purchasing electronic components, and safe work practices. You'll find all thisin a guide that's destined to get your creative-and inventive-juices flowing.

Download or read book Integrated Microsystems written by Krzysztof Iniewski and published by CRC Press. This book was released on 2011-10-11 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate biomedical engineering and military applications. Edited by Kris Iniewski, a revolutionary in the field of advanced semiconductor materials, Integrated Microsystems: Electronics, Photonics, and Biotechnology focuses on techniques for optimized design and fabrication of these intelligent miniaturized devices and systems. Composed of contributions from experts in academia and industry around the world, this reference covers processes compatible with CMOS integrated circuits, which combine computation, communications, sensing, and actuation capabilities. Light on math and physics, with a greater emphasis on microsystem design and configuration and electrical engineering, this book is organized in three sections—Microelectronics and Biosystems, Photonics and Imaging, and Biotechnology and MEMs. It addresses key topics, including physical and chemical sensing, imaging, smart actuation, and data fusion and management. Using tables, figures, and equations to help illustrate concepts, contributors examine and explain the potential of emerging applications for areas including biology, nanotechnology, micro-electromechanical systems (MEMS), microfluidics, and photonics.

Download or read book Hertzian Tales written by Anthony Dunne and published by MIT Press. This book was released on 2008-09-26 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: How design can improve the quality of our everyday lives by engaging the invisible electromagnetic environment in which we live. As our everyday social and cultural experiences are increasingly mediated by electronic products—from "intelligent" toasters to iPods—it is the design of these products that shapes our experience of the "electrosphere" in which we live. Designers of electronic products, writes Anthony Dunne in Hertzian Tales, must begin to think more broadly about the aesthetic role of electronic products in everyday life. Industrial design has the potential to enrich our daily lives—to improve the quality of our relationship to the artificial environment of technology, and even, argues Dunne, to be subverted for socially beneficial ends. The cultural speculations and conceptual design proposals in Hertzian Tales are not utopian visions or blueprints; instead, they embody a critique of present-day practices, "mixing criticism with optimism." Six essays explore design approaches for developing the aesthetic potential of electronic products outside a commercial context—considering such topics as the post-optimal object and the aesthetics of user-unfriendliness—and five proposals offer commentary in the form of objects, videos, and images. These include "Electroclimates," animations on an LCD screen that register changes in radio frequency; "When Objects Dream...," consumer products that "dream" in electromagnetic waves; "Thief of Affection," which steals radio signals from cardiac pacemakers; "Tuneable Cities," which uses the car as it drives through overlapping radio environments as an interface of hertzian and physical space; and the "Faraday Chair: Negative Radio," enclosed in a transparent but radio-opaque shield. Very little has changed in the world of design since Hertzian Tales was first published by the Royal College of Art in 1999, writes Dunne in his preface to this MIT Press edition: "Design is not engaging with the social, cultural, and ethical implications of the technologies it makes so sexy and consumable." His project and proposals challenge it to do so.

Download or read book Photodetectors written by and published by Woodhead Publishing. This book was released on 2015-10-24 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photodetectors: Materials, Devices and Applications discusses the devices that convert light to electrical signals, key components in communication, computation, and imaging systems. In recent years, there has been significant improvement in photodetector performance, and this important book reviews some of the key advances in the field. Part one covers materials, detector types, and devices, and includes discussion of silicon photonics, detectors based on reduced dimensional charge systems, carbon nanotubes, graphene, nanowires, low-temperature grown gallium arsenide, plasmonic, Si photomultiplier tubes, and organic photodetectors, while part two focuses on important applications of photodetectors, including microwave photonics, communications, high-speed single photon detection, THz detection, resonant cavity enhanced photodetection, photo-capacitors and imaging. Reviews materials, detector types and devices Addresses fabrication techniques, and the advantages and limitations and different types of photodetector Considers a range of application for this important technology Includes discussions of silicon photonics, detectors based on reduced dimensional charge systems, carbon nanotubes, graphene, nanowires, and more

Download or read book Electronic Products Magazine written by and published by . This book was released on 1983 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to the Physics of Nanoelectronics written by Seng Ghee Tan and published by Elsevier. This book was released on 2012-03-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the physics of nanoelectronics, with a focus on the theoretical aspects of nanoscale devices. The book begins with an overview of the mathematics and quantum mechanics pertaining to nanoscale electronics, to facilitate the understanding of subsequent chapters. It goes on to encompass quantum electronics, spintronics, Hall effects, carbon and graphene electronics, and topological physics in nanoscale devices.Theoretical methodology is developed using quantum mechanical and non-equilibrium Green's function (NEGF) techniques to calculate electronic currents and elucidate their transport properties at the atomic scale. The spin Hall effect is explained and its application to the emerging field of spintronics – where an electron's spin as well as its charge is utilised – is discussed. Topological dynamics and gauge potential are introduced with the relevant mathematics, and their application in nanoelectronic systems is explained. Graphene, one of the most promising carbon-based nanostructures for nanoelectronics, is also explored. - Begins with an overview of the mathematics and quantum mechanics pertaining to nanoscale electronics - Encompasses quantum electronics, spintronics, Hall effects, carbon and graphene electronics, and topological physics in nanoscale devices - Comprehensively introduces topological dynamics and gauge potential with the relevant mathematics, and extensively discusses their application in nanoelectronic systems

Download or read book Electronic Scientific Technical and Medical Journal Publishing and Its Implications written by National Research Council and published by National Academies Press. This book was released on 2005-05-24 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the proceedings of a 2003 symposium on "Electronic Scientific, Technical, and Medical Journal Publishing and Its Implications," which brought together experts in STM publishing, both producers and users of these publications, to: (1) identify the recent technical changes in publishing, and other factors, that influence the decisions of journal publishers to produce journals electronically; (2) identify the needs of the scientific, engineering, and medical community as users of journals, whether electronic or printed; (3) discuss the responses of not-for-profit and commercial STM publishers and of other stakeholders in the STM community to the opportunities and challenges posed by the shift to electronic publishing; and (4) examine the spectrum of proposals that has been put forth to respond to the needs of users as the publishing industry shifts to electronic information production and dissemination.

Download or read book A Directory of Information Resources in the United States Physical Sciences Engineering written by National Referral Center (U.S.) and published by . This book was released on 1971 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Electronics for Optical Design and Engineering written by Scott W. Teare and published by . This book was released on 2016 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a functional overview of electronics and an appreciation for how knowledge of electronics can enhance optical engineering projects. The first six chapters focus on a wide range of circuits that are fundamental to understanding and working with electronics. This presentation is supplemented by techniques for making electronic measurements and for moving data from the sensor to the computer. The next seven chapters introduce electronic devices of interest to optical engineers and build on the earlier chapters. Examples are provided throughout the book that range from simple calculations to sample MATLAB scripts. The aim of the MATLAB-based examples is to support an understanding of the fundamentals and relationships behind the electronics, and to provide a starting point for creating customized code"--

Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2002 with total page 1376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability of Semiconductor Lasers and Optoelectronic Devices written by Robert Herrick and published by Woodhead Publishing. This book was released on 2021-03-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability of Semiconductor Lasers and Optoelectronic Devices simplifies complex concepts of optoelectronics reliability with approachable introductory chapters and a focus on real-world applications. This book provides a brief look at the fundamentals of laser diodes, introduces reliability qualification, and then presents real-world case studies discussing the principles of reliability and what occurs when these rules are broken. Then this book comprehensively looks at optoelectronics devices and the defects that cause premature failure in them and how to control those defects. Key materials and devices are reviewed including silicon photonics, vertical-cavity surface-emitting lasers (VCSELs), InGaN LEDs and lasers, and AlGaN LEDs, covering the majority of optoelectronic devices that we use in our everyday lives, powering the Internet, telecommunication, solid-state lighting, illuminators, and many other applications. This book features contributions from experts in industry and academia working in these areas and includes numerous practical examples and case studies.This book is suitable for new entrants to the field of optoelectronics working in R&D. - Includes case studies and numerous examples showing best practices and common mistakes affecting optoelectronics reliability written by experts working in the industry - Features the first wide-ranging and comprehensive overview of fiber optics reliability engineering, covering all elements of the practice from building a reliability laboratory, qualifying new products, to improving reliability on mature products - Provides a look at the reliability issues and failure mechanisms for silicon photonics, VCSELs, InGaN LEDs and lasers, AIGaN LEDs, and more

Download or read book Electronic Structure written by Richard M. Martin and published by Cambridge University Press. This book was released on 2004-04-08 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important graduate textbook in condensed matter physics by highly regarded physicist.

Download or read book Power Electronics written by Dr. J. S. Chitode and published by Technical Publications. This book was released on 2020-12-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power semiconductor devices are discussed in first chapter. SCR, GTO, LASCR, RCT, MCT, characteristics, rating turn-off and turn-on is presented. Power BJT, MOSFET, IGBT, driving circuits, protection and snubber circuits are also discussed. Commutation circuits and series and parallel operation are presented. Single and three phase controlled converters are given in second chapter. Half wave, full wave, midpoint, semiconverters, full converters, dual converters and effect of source inductance is also given. Operation with resistive and inductive load is discussed. Third chapter presents AC voltage controllers and cycloconverters. On-off control, phase control, triac based controllers are given. Cycloconverters and operations with inductive as well as resistive load are discussed. Choppers are given in fourth chapter. Step down, step up, voltage, current and load commutated choppers are given. Classification is also discussed. Last chapter presents inverters. Half bridge, full bridge, quasi square wave, push-pull, thyristorized inverters with resistive and inductive loads are given. Switching techniques for PWM inverters are also given.

Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.