Download or read book PEM Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2021-11-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters Presents state-of-the-art PEMFC research alongside the underlying concepts

Download or read book Proton Exchange Membrane Fuel Cells 7 written by and published by The Electrochemical Society. This book was released on 2007 with total page 1581 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proton Exchange Membrane Fuel Cells written by Alhussein Albarbar and published by Springer. This book was released on 2017-11-17 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the characteristics of Proton Exchange Membrane (PEM) Fuel Cells with a focus on deriving realistic finite element models. The book also explains in detail how to set up measuring systems, data analysis, and PEM Fuel Cells’ static and dynamic characteristics. Covered in detail are design and operation principles such as polarization phenomenon, thermodynamic analysis, and overall voltage; failure modes and mechanisms such as permanent faults, membrane degradation, and water management; and modelling and numerical simulation including semi-empirical, one-dimensional, two-dimensional, and three-dimensional models. It is appropriate for graduate students, researchers, and engineers who work with the design and reliability of hydrogen fuel cells, in particular proton exchange membrane fuel cells.

Download or read book PEM Fuel Cells written by Frano Barbir and published by Academic Press. This book was released on 2012-09-25 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demand for fuel cell technology is growing rapidly. Fuel cells are being commercialized to provide power to buildings like hospitals and schools, to replace batteries in portable electronic devices, and as replacements for internal combustion engines in vehicles. PEM (Proton Exchange Membrane) fuel cells are lighter, smaller, and more efficient than other types of fuel cell. As a result, over 80% of fuel cells being produced today are PEM cells. This new edition of Dr. Barbir's groundbreaking book still lays the groundwork for engineers, technicians and students better than any other resource, covering fundamentals of design, electrochemistry, heat and mass transport, as well as providing the context of system design and applications. Yet it now also provides invaluable information on the latest advances in modeling, diagnostics, materials, and components, along with an updated chapter on the evolving applications areas wherein PEM cells are being deployed. Comprehensive guide covers all aspects of PEM fuel cells, from theory and fundamentals to practical applications Provides solutions to heat and water management problems engineers must face when designing and implementing PEM fuel cells in systems Hundreds of original illustrations, real-life engineering examples, and end-of-chapter problems help clarify, contextualize, and aid understanding

Download or read book Proton Exchange Membrane PEM Fuel Cells Fact sheet written by and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proton Exchange Membrane Fuel Cells 8 written by T. Fuller and published by The Electrochemical Society. This book was released on 2008-10 with total page 2220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international symposium is devoted to all aspects of research, development, and engineering of proton exchange membrane (PEM) fuel cells and stacks, as well as low-temperature direct-fuel cells. The intention is to bring together the international community working on the subject and to enable effective interactions between research and engineering communities.

Download or read book Proton Exchange Membrane Fuel Cells 6 written by Thomas Francis Fuller and published by The Electrochemical Society. This book was released on 2006 with total page 1385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium was devoted to all aspects of research development and engineering of proton exchange membrane fuel cells. Three subareas were covered: materials and electrode processes, fuel cell systems, and durability.

Download or read book Anion Exchange Membrane Fuel Cells written by Liang An and published by Springer. This book was released on 2018-03-21 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of the latest advances in anion exchange membrane fuel cells. Starting with an introduction to the field, it then examines the chemistry and catalysis involved in this energy technology. It also includes an introduction to the mathematical modelling of these fuel cells before discussing the system design and performance of real-world systems. Anion exchange membrane fuel cells are an emerging energy technology that has the potential to overcome many of the obstacles of proton exchange membrane fuel cells in terms of the cost, stability, and durability of materials. The book is an essential reference resource for professionals, researchers, and policymakers around the globe working in academia, industry, and government.

Download or read book High Temperature Polymer Electrolyte Membrane Fuel Cells written by Qingfeng Li and published by Springer. This book was released on 2015-10-15 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive review of high-temperature polymer electrolyte membrane fuel cells (PEMFCs). PEMFCs are the preferred fuel cells for a variety of applications such as automobiles, cogeneration of heat and power units, emergency power and portable electronics. The first 5 chapters of the book describe rationalization and illustration of approaches to high temperature PEM systems. Chapters 6 - 13 are devoted to fabrication, optimization and characterization of phosphoric acid-doped polybenzimidazole membranes, the very first electrolyte system that has demonstrated the concept of and motivated extensive research activity in the field. The last 11 chapters summarize the state-of-the-art of technological development of high temperature-PEMFCs based on acid doped PBI membranes including catalysts, electrodes, MEAs, bipolar plates, modelling, stacking, diagnostics and applications.

Download or read book Proton Exchange Membrane Fuel Cells 7 written by Thomas Francis Fuller and published by ECS Transactions. This book was released on 2007 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proton Exchange Membrane Fuel Cells Modeling written by Fengge Gao and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fuel cell is a potential candidate for energy storage and conversion in our future energy mix. It is able to directly convert the chemical energy stored in fuel (e.g. hydrogen) into electricity, without undergoing different intermediary conversion steps. In the field of mobile and stationary applications, it is considered to be one of the future energy solutions. Among the different fuel cell types, the proton exchange membrane (PEM) fuel cell has shown great potential in mobile applications, due to its low operating temperature, solid-state electrolyte and compactness. This book presents a detailed state of art of PEM fuel cell modeling, with very detailed physical phenomena equations in different physical domains. Examples and a fully coupled multi-physical 1.2 kW PEMFC model are given help the reader better understand how to use the equations.

Download or read book Proton Exchange Membrane Fuel Cells 7 Part 2 written by T. Fuller and published by ECS Transactions. This book was released on 2007-09 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proton Exchange Membrane Fuel Cells written by Zhigang Qi and published by CRC Press. This book was released on 2013-12-16 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an industry-leading scientist, Proton Exchange Membrane Fuel Cells explains the theoretical foundations of PEM fuel cells in relation to practical design and operation to not only help beginners grasp the essentials, but also guide industry professionals in tackling technical challenges. Useful to scientists, researchers, students, academics, and practicing engineers, the book covers the fundamentals, materials, components, modules, system architecture, applications, and current developmental status; offers real-world examples; and provides insight into advancing this sustainable clean technology.

Download or read book PEM Fuel Cells written by Frano Barbir and published by Academic Press. This book was released on 2012-12-31 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demand for fuel cell technology is growing rapidly. Fuel cells are being commercialized to provide power to buildings like hospitals and schools, to replace batteries in portable electronic devices, and as replacements for internal combustion engines in vehicles. PEM (Proton Exchange Membrane) fuel cells are lighter, smaller, and more efficient than other types of fuel cell. As a result, over 80% of fuel cells being produced today are PEM cells. This new edition of Dr. Barbir’s groundbreaking book still lays the groundwork for engineers, technicians and students better than any other resource, covering fundamentals of design, electrochemistry, heat and mass transport, as well as providing the context of system design and applications. Yet it now also provides invaluable information on the latest advances in modeling, diagnostics, materials, and components, along with an updated chapter on the evolving applications areas wherein PEM cells are being deployed. Comprehensive guide covers all aspects of PEM fuel cells, from theory and fundamentals to practical applications Provides solutions to heat and water management problems engineers must face when designing and implementing PEM fuel cells in systems Hundreds of original illustrations, real-life engineering examples, and end-of-chapter problems help clarify, contextualize, and aid understanding

Download or read book Proton Exchange Membrane Fuel Cells 9 written by T. Fuller and published by The Electrochemical Society. This book was released on 2009-09 with total page 2100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions is devoted to all aspects of research, development, and engineering of proton exchange membrane (PEM) fuel cells and attacks, as well as low-temperature direct-fuel cells. The intention of the symposium is to bring together the international community working on the subject and to enable effective interactions between the research and engineering communities. This issue is sold as a two-part set.

Download or read book Fuel Cells and Hydrogen Production written by Timothy E. Lipman and published by Springer. This book was released on 2018-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expected end of the “oil age” will lead to increasing focus and reliance on alternative energy conversion devices, among which fuel cells have the potential to play an important role. Not only can phosphoric acid and solid oxide fuel cells already efficiently convert today’s fossil fuels, including methane, into electricity, but other types of fuel cells, such as polymer electrolyte membrane fuel cells, have the potential to become the cornerstones of a possible future hydrogen economy. This handbook offers concise yet comprehensive coverage of the current state of fuel cell research and identifies key areas for future investigation. Internationally renowned specialists provide authoritative introductions to a wide variety of fuel cell types and hydrogen production technologies, and discuss materials and components for these systems. Sustainability and marketing considerations are also covered, including comparisons of fuel cells with alternative technologies.

Download or read book Proton Exchange Membrane Fuel Cells 7 Parts 1 And 2 written by T. Fuller and published by ECS Transactions. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international symposium is devoted to all aspects of research, development, and engineering of proton exchange membrane (PEM) fuel cells and stacks, as well as direct methanol fuel cells or other low-temperature direct-fuel cells. The intention is to bring together the international community working on the subject and to enable effective interactions between research and engineering communities.