Download or read book Protective Particle Coatings Applied by Cold Plasma Spraying written by Lena Wallenhorst and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, two different types of particle coatings deposited by cold plasma spraying on wood and glass substrates were investigated in an attempt to achieve protection of wood or other surfaces, particularly in outdoor applications. The first type involved coatings comprised of zinc and zinc oxide that were deposited from elemental zinc. Zinc oxide features several properties favourable to wood protection, such as absorption of ultraviolet light. Indeed, UV-blocking properties of semi-transparent coatings on acrylic glass were confirmed and UV-induced discolouration of wood could be d...
Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems
Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.
Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.
Download or read book Plasma Spraying written by R. Suryanarayanan and published by World Scientific. This book was released on 1993 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent advances in plasma spraying are discussed in this book which divides into two sections — theory and application. The book presents sophisticated experimental techniques, diagnostics, theoretical models and computer simulations which not only improve the understanding and uses of the spraying process but also help to increase the reliability factor of the manufacturing components. Applications that are metallurgical, aeronautical, automobile, chemical, etc. are also shown. More importantly, applications that include silicon for solar cells, magnets and superconductors are also discussed for the first time. Advanced graduate students in materials science and engineering, research scientists, engineers and industries involved in plasma spray applications will benefit from this book.
Download or read book Plasma Spray Coating written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, thermal spraying of metallic, ceramic and composite coatings has emerged as a powerful tool for surface engineering, with many new applications and markets continually being developed. This book will help materials scientists and engineers to choose the most appropriate combination of materials, equipment, and operation parameters for the design of high-performance coatings with new functional properties and improved service life. Includes: * a thorough treatment of the fundamental physical processes governing plasma spray technology; * a critical assessment of advantages and disadvantages of the method compared with other suface coating techniques; * a discussion of basic equipment requirements and limitations; * case studies and typical applications to solve industrial problems. Plasma-Spray Coating offers a stimulating combination of basic concepts and practical applications. Materials scientists and engineers, as well as graduate students will find this book of enormous value.
Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume representing the second International Thermal Spray Conference (May 2004, Osaka, Japan) contains 232 papers and 93 poster presentations. Arrangement is in sections on applications, characterization methods for coating properties, coating technologies for vehicle engines, cold spray, consumables for thermal spraying, corrosion protection, economics and quality, HVOF processes and materials, innovative equipment and process technology, modeling and simulation, nanostructured materials, photocatalytic materials, process diagnostics, protective coatings against wear and erosion, and thermal barrier coatings. No index is provided, but the included CD- ROM presumably contains the contents in a searchable format. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
Download or read book Micro Process and Quality Control of Plasma Spraying written by Guozheng Ma and published by Springer Nature. This book was released on 2022-09-08 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the basic physical process and chemical reaction of plasma spraying particle melting, flight and deposition. It introduces the basic scientific contents such as the basic characteristics and spraying principle of plasma arc, the interaction between spraying particles in flight section and plasma jet, the spreading and solidification behavior of single droplet and the performance test of flat particles, macro performance evaluation and quality optimization of coating. The typical applications of plasma spraying coating and the new developing direction of plasma spraying technology are summarized. This book will be helpful for the graduate students, researchers, as well as engineers in the field of plasma spray.
Download or read book Performance of Plasma Sprayed Coating written by Zhongyu Piao and published by Springer Nature. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functional Coatings written by Raj K. Arya and published by John Wiley & Sons. This book was released on 2024-05-07 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUNCTIONAL COATINGS A must-own resource for understanding functional coatings and their revolutionary potential Functional coatings are those which provide not only the protection and performance enhancement of a conventional coating, but also offer additional properties tailored to meet the specific requirements of a given industry or application. They have applications in a huge range of sectors, including automotive, aerospace, healthcare, energy, and more. Coatings with properties like fire retardancy, antimicrobial properties, or controlled drug release have the potential to revolutionize entire industries. Functional Coatings offers a comprehensive resource for engineers and researchers looking to understand these coatings and the opportunities they provide. Beginning with an overview of the subject’s foundations and industrial significance, the book analyzes numerous coating methods and their properties, with a particular focus on anticorrosion coatings. The result is an indispensable resource for professionals in virtually any technological industry looking to understand the benefits of a cutting-edge toolkit. Functional Coatings readers will also find: Coverage of synthesis, durability, reproducibility, cost-effectiveness, specialized surface morphology, and environmental friendliness of each coating Detailed discussion of antimicrobial coatings, fire-retardant coatings, self-healing coatings, nanopowder coatings, coatings for marine applications, and many more Applications of additives, machine learning, and sophisticated characterizations, etc. as per industry requirements Functional Coatings is ideal for researchers, engineers, and industry professionals working with any area of technology where coatings have purchase.
Download or read book The Science and Engineering of Thermal Spray Coatings written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book Aerospace Materials Handbook written by Sam Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether an airplane or a space shuttle, a flying machine requires advanced materials to provide a strong, lightweight body and a powerful engine that functions at high temperature. The Aerospace Materials Handbook examines these materials, covering traditional superalloys as well as more recently developed light alloys. Capturing state-of-the-art d
Download or read book Protection against Erosive Wear using Thermal Sprayed Cermet written by Carlos P. Bergmann and published by Springer Science & Business Media. This book was released on 2011-07-02 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erosive wear is characterized by successive loss of material from the surface due to the continuous impact of solid particles. This type of wear affects numerous industries, such as power generation, mining, and the pneumatic transportation of solids. The worst case scenario normally occurs where there is a combination of both erosion and oxidation, especially at high temperatures. In order to minimize damage caused by erosive wear, many authors propose the use of better bulk materials or surface coatings, and generally cermets are suggested. Various researchers have conducted experiments to study the wear mechanisms occurring in this kind of materials, but most of these experiments do not lead to similar results; in fact, there is no accordance among the authors, and moreover, some wear variables are ignored. In this book, studies undertaken in this field by several investigators have been discussed extensively. At the end of it, table reviews are suggested to summarize the most important mechanisms of the erosive wear in bulk and coating cermets.
Download or read book Gaseous Hydrogen Embrittlement of Materials in Energy Technologies written by Richard P Gangloff and published by Elsevier. This book was released on 2012-01-19 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern energy systems are reliant on the production, transportation, storage, and use of gaseous hydrogen. The safety, durability, performance and economic operation of these systems is challenged by operating-cycle dependent degradation by hydrogen of otherwise high performance materials. This important two-volume work provides a comprehensive and authoritative overview of the latest research into managing hydrogen embrittlement in energy technologies.Volume 2 is divided into three parts, part one looks at the mechanisms of hydrogen interactions with metals including chapters on the adsorption and trap-sensitive diffusion of hydrogen and its impact on deformation and fracture processes. Part two investigates modern methods of modelling hydrogen damage so as to predict material-cracking properties. The book ends with suggested future directions in science and engineering to manage the hydrogen embrittlement of high-performance metals in energy systems.With its distinguished editors and international team of expert contributors, Volume 2 of Gaseous hydrogen embrittlement of materials in energy technologies is an invaluable reference tool for engineers, designers, materials scientists, and solid mechanicians working with safety-critical components fabricated from high performance materials required to operate in severe environments based on hydrogen. Impacted technologies include aerospace, petrochemical refining, gas transmission, power generation and transportation. - Summarises the wealth of recent research on understanding and dealing with the safety, durability, performance and economic operation of using gaseous hydrogen at high pressure - Chapters review mechanisms of hydrogen embrittlement including absorption, diffusion and trapping of hydrogen in metals - Analyses ways of modelling hydrogen-induced damage and assessing service life
