Download or read book Lower limb Prosthetics written by Norman Berger and published by . This book was released on 1997 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Biocomposites written by Mohammad Jawaid and published by Springer. This book was released on 2017-02-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept, design and application of green biocomposites, with a specific focus on the current demand for green biocomposites for automotive and aerospace components. It discusses the mathematical background, innovative approaches to physical modelling, analysis and design techniques. Including numerous illustrations, tables, case studies and exercises, the text summarises current research in the field. It is a valuable reference resource for researchers, students and scientists working in the field of materials science.
Download or read book Partial foot amputations written by Bengt Söderberg and published by . This book was released on 2001 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Design of Perforated Prosthetic Sockets ARCHM to Increase Heat Transfer of Residual Limbs written by Luis Carbajal and published by . This book was released on 2015 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat build-up in prosthetic sockets is a significant problem experienced by many amputees in America, with no central solution in sight. Heat and discomfort accounts for over 70% of problems experienced by lower limb amputees in America. Although there have been advances in prosthetics in the active-power knees and ankles, not even cybernetics can improve the comfort of the prosthesis if there is still a socket. The materials in prosthetic sockets are not conductive enough to relieve the heat inside of the socket. The purpose of this study is to model the temperature variance and heat transfer of an amputee's residual limb and design ways to improve current prosthetic socket technologies. With the addition of small holes, or perforations, in the socket, there will be an increase in the heat transfer by convection, while still maintaining the strength of a carbon fiber prosthesis. Through the use of discrete approximation modeling, the transient temperature inside of the socket layers can be identified and improved through design patterns cut into the socket. Increased heat transfer can be observed as the perforations in the socket become larger, although the larger the holes, the larger the stresses are in the prosthesis. Non-intrusive designs were developed for sockets before and after they are made to increase convection surface area. More modeling needs to be done in 3-dimensional polar coordinates.
Download or read book A Low cost Volume Adjustable Lower Limb Prosthetic Socket written by Meagan Renee Vaughan and published by . This book was released on 2014 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: An issue of great concern for amputees continues to be lack of proper fit and comfort in their sockets. This lack can often be attributed to changes in the shape of the residual limb that cannot be compensated for by existing prosthetic socket technology. In regions where cost is a prohibitive factor in the replacement of ill-fitting prosthetic sockets, the need for a volume adjustable, and potentially longer lasting, socket design is abundant. This research focuses on designing a volume adjustable lower limb prosthetic socket that accommodates the needs of amputees in underdeveloped countries using collaborative design techniques. Though advocated as a means of accurately identifying and satisfying their needs, including end-users in the design process often adds an additional layer of complexity because of differences in culture, language, or geography among the participants. This research therefore includes a study in which product design techniques were applied to the same volume adjustable socket design problem with a variety of users -- typical users, lead users, and new Empathic Lead Users -- from different countries, one developed and one developing. To overcome differences among participants, this research includes an alternative strategy to create Empathic Lead Users (ELU) from non-user product design engineers through the use of simulated lead user experiences. As a result of this study, customer needs analysis with ELU helps to identify 95% of traditional and lead user customer needs and 100% more latent needs, and possibly more avenues for product innovations, than interviewing lead or traditional users alone. The concepts generated by all users were also compared. Based on the resulting concepts' novelty, variety, quality, and quantity, all users were able to satisfactorily complete the concept generation exercises and produced competitive design solutions. Using the concepts generated during this co-design study, a volume adjustable socket was developed. The final socket design, based on the analogous rotational movement of a camera aperture, is pursued through mechanical and subject testing. Early users of the socket liked the design and it has been demonstrated to provide the necessary volume adjustments, but future design iterations to improve its comfort are necessary.
Download or read book Stress Distribution and Optimum Design of Polypropylene and Laminated Transtibial Prosthetic Sockets FEM and Experimental Implementations written by Hayder Al-Shuka and published by GRIN Verlag. This book was released on 2018-02-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Study from the year 2017 in the subject Medicine - Other, , language: English, abstract: This study presents analyses for below knee prosthetic socket of a human. Socket stress distribution is performed on three types of socket, polypropylene (5mm), polypropylene (3mm) and a standard laminate (3mm) sockets to determine the stresses path through the prosthetic socket during the gait cycle. It is found that heel strike phase is the critical phase. The stresses increase at the socket base while the maximum deflection is maximum at the patellar region of the socket. This work is achieved by finite element program, ANSYS. The development of design specifications of a below the knee prosthetic socket is presented in this study for successful ambulation and comfort. Seven different design models are created by changing the socket wall thickness and the material. Polypropylene socket gives the best results with regard to the allowable deflection for the regions of the pressure relief areas of the stump. The effect of varying the modulus of elasticity on the polypropylene socket is considered in this study. Three models are analyzed with different tensile creep moduli during different periods. It is found that the polypropylene socket will enlarge in size with time. An experimental study is conducted to compare the strength of five prosthetic sockets made of different materials. Compression, three-point flexural and tensile tests are implemented by the Testometric machine. The laminate sockets have larger compressive stiffness than polypropylene while polypropylene has larger flexural stiffness than the tested laminates except for socket No.5.
Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2008 written by Dimitris Metaxas and published by Springer. This book was released on 2008-10-30 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th International Conference on Medical Imaging and Computer Assisted Intervention, MICCAI 2008, was held at the Helen and Martin Kimmel Center of New York University, New York City, USA on September 6–10, 2008. MICCAI is the premier international conference in this domain, with - depth papers on the multidisciplinary ?elds of biomedical image computing and analysis, computer assisted intervention and medical robotics. The conference brings together biological scientists, clinicians, computer scientists, engineers, mathematicians, physicists and other interested researchers and o?ers them a forum to exchange ideas in these exciting and rapidly growing ?elds. The conference is both very selective and very attractive: this year we - ceived a record number of 700 submissions from 34 countries and 6 continents, fromwhich258papers were selectedfor publication,whichcorrespondsto a s- cess rate of approximately 36%. Some interesting facts about the distribution of submitted and accepted papers are shown graphically at the end of this preface. The paper selection process this year was based on the following procedure, which included the introduction of several novelties over previous years. 1. A ProgramCommittee (PC) of 49 members was recruited by the Program Chairs,to getthenecessarybody ofexpertiseandgeographicalcoverage.All PC members agreed in advance to participate in the ?nal paper selection process. 2. Key words grouped in 7 categories were used to describe the content of the submissions and the expertise of the reviewers.
Download or read book Prosthetic Restoration and Rehabilitation of the Upper and Lower Extremity written by Alicia J. Davis, MPA, CPO, FAAOP and published by Demos Medical Publishing. This book was released on 2013-12-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prosthetic Restoration and Rehabilitation of the Upper and Lower Extremity is a well-illustrated, state-of-the-art reference on the science and practice of post-amputation care, prosthetic restoration, and functional rehabilitation, designed to maximize patient independence and quality of life. Chapters are written by physiatrists, prosthetists, surgeons, and therapists at the University of Michigan, clinicians and teachers who work with amputees on a daily basis. Clinically oriented, it covers both lower and upper extremity restoration and rehabilitation and serves as a handy reference for busy practitioners to support sound clinical decision-making. Beginning with basic anatomy, kinesiology, and a recap of surgical decisions principles and post-operative care for amputees, the book discusses biomechanics, clinical assessment, prosthetic options, how to write a complete and detailed prescription for the prosthesis, restoration and management of specific problems by region, and rehabilitation programs and strategies. Common medical issues such as phantom limb sensation and pain, skin problems, and sexual and psychological considerations are discussed as well. In-depth coverage of prosthetic restoration is provided for special populations such as infants, children, the elderly, athletes multi-extremity amputees, and those who have lost limbs to cancer. Chapters are written in expanded outline format for ease of use and feature numerous full-color diagrams, photos, and other illustrations. This text will guide physicians, trainees, and other members of the care team through the fundamentals of restoring function to individuals who have lost limbs or body parts. Key Features: Provides a state-of-the-art, accessible, clinical approach to post-amputation care, prosthetic restoration, and functional rehabilitation Covers both upper and lower extremities Addresses prostheses for special populations and sports and recreation Includes boxed clinical pearls at the start of each chapter, illustrated quick reference tables, and full-color photos throughout Supports clinical decision making and addresses practical questions and problems Advises on new requirements for Medicare and Medicaid patients, and includes patient education materials and sample prescription forms that can be customized for use in any clinic Outlines important information for returning to the community after amputation
Download or read book WITS 2020 written by Saad Bennani and published by Springer Nature. This book was released on 2021-07-21 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed articles from the 6th International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS 2020), held at Fez, Morocco. It presents original research results, new ideas and practical lessons learnt that touch on all aspects of wireless technologies, embedded and intelligent systems. WITS is an international conference that serves researchers, scholars, professionals, students and academicians looking to foster both working relationships and gain access to the latest research results. Topics covered include Telecoms & Wireless Networking Electronics & Multimedia Embedded & Intelligent Systems Renewable Energies.
Download or read book Atlas of Limb Prosthetics written by American Academy of Orthopaedic Surgeons and published by Amer Academy of Orthopaedic. This book was released on 2002-01-01 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newly available after being out of print for several years, this is the definitive reference on the surgical and prosthetic management of acquired or congenital limb loss. Covers indications for amputation vs. limb salvage for trauma, peripheral vascular disease, and tumours; indications for prostheses for amputation levels; and rehabilitation approaches.
Download or read book A Method for Evaluating Above Knee Prosthetic Socket Designs written by Paul Edward Dresens and published by . This book was released on 1993 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomechanics of Lower Limb Prosthetics written by Mark R. Pitkin and published by Springer. This book was released on 2009-10-14 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword from a Clinical Biomechanist, Applied Physiologist and Prosthetist teaching graduate students in Prosthetics & Orthotics. While there are many books on Biomechanics, arguably the quintessential science of limb prosthetics, none addresses the fundamental principles in sufficient detail and depth to be practically useful to the prosthetist, rehabilitation specialist or researcher. Dr. Pitkin’s monograph is an exemplary collection of theoretical principles from his research and o- ers, presented in its clinical and applied biomechanics form. The textbook provides an excellent overview of the many facets of lower limb prosthetic design and engineering for the ardent clinician researcher and student. The book delves into many of the basic concepts that are required knowledge for the clinician and the scientist to have as the foundation for their work. Dr. Pitkin has an e- quent manner in which he reflects on the history and literature to tell the storied evolution of prosthetic design . He takes the reader on a journey to consider his theories, which have substantive foundations to contemplate. By the end of chapter one, we have the basic h- tory and an appreciation for the rationale behind the “rolling joint ankle” with evidence to support his theoretical views.
Download or read book The Use of a Novel Residuum Model to Design a Variable impedance Transtibial Prosthetic Socket written by David Moinina Sengeh and published by . This book was released on 2016 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: For people living with limb amputation, the prosthetic socket - the interface between the residuum and prosthesis - is the most critical component. When a socket is uncomfortable, especially due to poor fit, the quality of life for a patient is greatly hindered. However, conventional design of sockets is largely artisan, with limited input of quantitative data. Current computer-aided and manufacturing (CAD/CAM) designs are still not clinically applicable solutions. Due to model identification procedures that employ non patient-specific and incomplete data sets, today's finite element (FE) models of the residuum are not predictive, leading to suboptimal socket designs. As such, there exists a need for a comprehensive biomechanical model of the residuum for the quantitative design and computational evaluation of patient-specific prosthetic sockets. This thesis presents a combined experimental-numerical approach to evaluate and validate a transtibial residuum biomechanical model. The central hypothesis of the work is that a single biomechanical model can predict the large non-linear response at various sites on a residuum under load. To evaluate this hypothesis, a non-linear, two-tissue model was formulated where tissue geometries were defined using MRI data of the residuum. The non-linear viscoelastic material parameters of the model were identified through inverse FEA-based optimization using in-vivo indentation experimental data at four locations. Using optimized model tissue parameters, the mean percentage error (mean absolute error/ maximum experimental force) between the experimental and simulation force-time curves at 14 other locations across the evaluated transtibial residuum was 7 ± 3%. Using this same modeling methodology and a single set of material constants to describe the bulk soft tissue biomechanical response of seven distinct transtibial residual limb models, the average percentage error for indentations at multiple locations across all seven limbs was 7 ± 1%. From these predictive models of residuum limbs, one rigid novel socket and two multimaterial transtibial sockets were designed, fabricated and evaluated through an entirely quantitative, automated and repeatable methodology. In a preliminary clinical investigation, the novel sockets were shown to reduce peak contact pressures at the tibia and fibular head regions on the residuum by significant amounts during standing compared to a conventional socket interface designed and fabricated by a trained prosthetist.
Download or read book The Promise of Assistive Technology to Enhance Activity and Work Participation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-09-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Census Bureau has reported that 56.7 million Americans had some type of disability in 2010, which represents 18.7 percent of the civilian noninstitutionalized population included in the 2010 Survey of Income and Program Participation. The U.S. Social Security Administration (SSA) provides disability benefits through the Social Security Disability Insurance (SSDI) program and the Supplemental Security Income (SSI) program. As of December 2015, approximately 11 million individuals were SSDI beneficiaries, and about 8 million were SSI beneficiaries. SSA currently considers assistive devices in the nonmedical and medical areas of its program guidelines. During determinations of substantial gainful activity and income eligibility for SSI benefits, the reasonable cost of items, devices, or services applicants need to enable them to work with their impairment is subtracted from eligible earnings, even if those items or services are used for activities of daily living in addition to work. In addition, SSA considers assistive devices in its medical disability determination process and assessment of work capacity. The Promise of Assistive Technology to Enhance Activity and Work Participation provides an analysis of selected assistive products and technologies, including wheeled and seated mobility devices, upper-extremity prostheses, and products and technologies selected by the committee that pertain to hearing and to communication and speech in adults.
Download or read book Prosthetic Socket Design written by Arthur J. Petron and published by . This book was released on 2016 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prosthetic socket, the mechanical interface between an amputated residuum and an external prosthesis, is of critical importance to the performance of a prosthetic limb system. Conventional prosthetic socket technology is derived using a non-quantitative, artisan methodology. Consequently, a comfortable socket interface cannot be made reproducibly, and persons with limb amputation too often experience discomfort. As a resolution to this difficulty, the field of digital prosthetic socket design seeks to advance a quantitative CAD/CAM methodology for socket production to produce reproducible and comfortable interfaces. Prosthetic researchers have proposed a digital socket production work flow comprising the steps of 1) assessment of residuum tissue biomechanics; 2) modeling optimization of the residuum-socket interface, and 3) fabrication of a variable-impedance socket system based upon these optimizations. In this thesis, two novel technologies are designed, built and evaluated at either end of this work flow, namely a multi-indenter device for in vivo biomechanical tissue measurement and a quasi-passive variable-impedance transtibial socket interface. An active indenter platform called the FitSocket is presented. To assess residual-limb tissue biomechanics, the FitSocket comprised 14 position and force controllable actuators that circumferentially surround a biological residuum to form an actuator ring. Each actuator is individually controllable in position (97.1?m accuracy) and force (330mN accuracy) at a PC controller feedback rate of 500Hz, allowing for a range of measurement across a residuum. At five distinct anatomical locations across the residual limb, force versus deflection data are presented, demonstrating the accuracy and versatility of the FitSocket for residual limb tissue characterization. A passive, single indenter version of the FitSocket, called the FitPen, is also presented. The FitPen is designed to be ultra-portable in order to take biomechanical measurements in the field outside the laboratory setting. A quasi-passive socket (QPS) is presented having spatially and temporally varying socket wall impedances. The QPS is an autonomous computerized transtibial prosthetic interface that can stiffen or become compliant using computer-controlled electrolaminate actuators. The QPS measures forces applied by the limb on the socket, 3-axis acceleration of the socket, and the position of the electrolaminates. On a test participant with transtibial amputation, the socket was evaluated through sit-to-stand tests to determine the viability of computer-controlled electrolaminate engagement, and through a walking study to evaluate the ability of the electrolaminates to maintain their clutched state during ambulation at a self-selected walking speed. The average deflections of forced tibia movement in the sit-to-stand tests were 7 ± 2 mm while sitting with the electrolaminates in an unclutched state, and 2.1 ± 0.6 mm while standing with the electrolaminates in a clutched state. Further, the walking study showed a maximum unclutched deflection (3.7 ± 0.9 mm)16 times larger than that of the maximum deflection while clutched. This work was supported by the United States Department of Veteran Affairs through the VA Innovation Initiative (VAi2) program.
Download or read book Design of an Adjustable Volume Prosthetic Leg Socket for a Below Knee Amputee written by Christopher Quadroy and published by . This book was released on 1992 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Problems arise with the prosthetic fit of the socket and liner of a below knee prosthesis due to daily fluctuations in stump volume. Much harm can be done to the stump with continued use of a prosthetic socket, which through changes in the stump has ceased to fit. Any factors which put at risk the health of the stump are undesirable. The prime objective of the project was therefore to design a prosthetic leg socket and liner for below knee amputees, in which the socket volume could be easily and conveniently adjusted to account for daily stump volume fluctuations. This was seen as providing a means in which the fit of a prosthesis could be regulated, thus encouraging greater stump health, and increasing the level of comfort for the wearer during everyday use. Whilst extensive testing is yet to be carried out, the results from initial trialling of a prototype prosthesis indicate that the application of an adjustable volume prosthetic socket and liner will be able to be successfully adopted if an appropriate amount of time and resources is spent in following up the work done to date. The testing undertaken to date has revealed that the prototype design requires further work and improvement in basic fabrication, the durability of some components being well below that expected if the unit is to become viable. This report concludes with a list of recommendations and further work requirements which should be undertaken to improve the current prototype, and continue development of the concept. " -- Abstract/Synopsis.
Download or read book Trans tibial Prosthetic System Design and Benefits for the Amputee Service Providers and Society written by Tim Dumbleton and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two trans-tibial socket concepts are in regular use in prosthetic clinics. These may be categorised as the "hands-on" (hand casting) concept and "hands-off' (pressure casting) concept which, in addition to the distinctive casting methods, require different liner materials and components to create the desired loading distribution. Amputees have stated that quality of fit of the prosthetic socket is of highest importance, but, although pressure distribution has long been regarded as important, there is no general consensus regarding socket fit criteria. Furthermore, the casting process is carried out with the limb stationary. During walking the pressure distribution will change constantly throughout the gait cycle. The quality of fit of the prosthesis remains very subjective with little quantitative information regarding the pressure distribution within the socket. The aim of this study was to investigate and to compare the dynamic interface pressure distribution of the two socket concepts for a trans-tibial amputee population. In addition, the impact of the two socket concepts on their daily living activities was assessed. The objective was to relate measured pressure distribution to activity level and patient acceptance and thus increase understanding of what constitutes a good socket fit. The dynamic interface pressure distribution inside the socket of 48 patient's own prosthesis was recorded, using a validated pressure measurement system. The dynamic pressures recorded between the residual limb and the prosthetic socket showed similar distributions between the different casting concepts, although overall the hands-off sockets showed higher pressures than the hands-on group. The results from the questionnaire indicated that the quality of fit of the prosthetic socket had a strong correlation with user satisfaction. Results of this study have shown that the impacts of the two distinct prosthetic socket concepts have on the life of the amputee are very similar. Most of the participants used their prosthetic device regularly, and responded in similar ways regardless of the type of socket worn.
