Download or read book Mechanisms in Homogeneous and Heterogeneous Epoxidation Catalysis written by S. Ted Oyama and published by Elsevier. This book was released on 2011-10-13 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The catalytic epoxidation of olefins plays an important role in the industrial production of several commodity compounds, as well as in the synthesis of many intermediates, fine chemicals, and pharmaceuticals. The scale of production ranges from millions of tons per year to a few grams per year. The diversity of catalysts is large and encompasses all the known categories of catalyst type: homogeneous, heterogeneous, and biological. This book summarizes the current status in these fields concentrating on rates, kinetics, and reaction mechanisms, but also covers broad topics including modeling, computational simulation, process concepts, spectroscopy and new catalyst development. The similarities and distinctions between the different reaction systems are compared, and the latest advances are described. - Comprehensive listing of epoxide products - Broad comparison of turnover frequencies of homogeneous, hetergeneous, main-group, biomimetic and biological catalysts - Analysis of the general strengths and weaknesses of varied catalytic systems - Detailed description of the mechanisms of reaction for classical and emerging catalysts

Download or read book Sustainable Strategies for the Upgrading of Natural Gas Fundamentals Challenges and Opportunities written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2005-06-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and feedstock materials for the chemical industry are in increasing demand and, with constraints related to the availability and use of oil, the energy and chemical industry is undergoing considerable changes. In recent years, major restructuring has occurred in the oil, petrochemical, and chemical industry, with increasing attention devoted to the use of natural gas, methane in particular, as a chemical feedstock rather than just as a fuel. The conversion of remote natural gas into liquid fuels or other transportable chemicals is a challenge to industrial catalysis. Few processes exist so far with the major ones involving the conversion of natural gas to synthesis gas by steam reforming, CO2 reforming, or partial oxidation, followed by the syntheses of methanol, hydrocarbons (Fischer-Tropsch synthesis), or ammonia. In this book, a comprehensive overview of the field of processing natural gas is given, through a series of chapters written by leading scientists and engineers in the field. New developments are discussed and current work relevant to the area is shown by a series of recent works by researchers working in this and related fields.

Download or read book Modern Heterogeneous Oxidation Catalysis written by Noritaka Mizuno and published by John Wiley & Sons. This book was released on 2009-11-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the current literature, this comprehensive reference presents all important catalyst classes, including metal oxides, polyoxometalates, and zeolites. Readers will find here everything they need to know -- from structure design to characterization, and from immobilization to industrial processes. A true must-have for anyone working in this key technology.

Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications

Download or read book Fundamental Concepts in Heterogeneous Catalysis written by Jens K. Nørskov and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a graduate course and suitable as a primer for any newcomer to the field, this book is a detailed introduction to the experimental and computational methods that are used to study how solid surfaces act as catalysts. Features include: First comprehensive description of modern theory of heterogeneous catalysis Basis for understanding and designing experiments in the field Allows reader to understand catalyst design principles Introduction to important elements of energy transformation technology Test driven at Stanford University over several semesters

Download or read book Handbook of Chemical Technology and Pollution Control written by Martin B. B. Hocking and published by Elsevier. This book was released on 2006-01-18 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Chemical Technology and Pollution Control, Third Edition provides a detailed review of the chemistry and operating conditions of many of the present large-scale chemical processes important to our economy and high standards of living. The processes that could lead to emissions affecting our air, soil, and water are considered, together with ways in which it may be possible to reduce or eliminate these pollutants. Focusing on cleaner production concepts without neglecting 'end of pipe' measures. With an increase in the awareness of corporate and social responsibility among business and industry leaders, the pressure to reduce harmful emissions and the desire to increase efficiencies and energy utilization, this book provides an essential resource. Suitable for researchers, practitioners and postgraduate students in the fields of chemical and biochemical engineering and environmental science, as well as government monitoring and regulatory agencies and industry leaders who want to stay one step ahead, this book will be a valuable addition to any library. - Integrated treatment of chemical technology with emission control chemistry - Introductory outline of the causes and effects of air and water pollution chemistry - Outline of the operating features and efficiency of basic emission control devices - Historical background of developments in industrial chemistry to 2004 in a single volume - Organized for easy access to chemical technology, new developments, or emission control details - Referenced to current additional sources of information in each area covered - Review questions provide working experience with the material provided

Download or read book Metal Catalyzed Oxidations of Organic Compounds written by Roger Sheldon and published by Elsevier. This book was released on 2012-12-02 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Catalyzed Oxidations of Organic Compounds: Mechanistic Principles and Synthetic focuses on the oxidative transformations of functional groups. This book explores oxidation as being extensively used in the laboratory synthesis of fine organic chemicals and in the manufacture of large-volume petrochemicals. Organized into two parts encompassing 13 chapters, this book starts with an overview of the mechanistic principles of oxidation–reduction in biochemical, organic, and inorganic systems. This text then proceeds with a discussion of the use of molecular oxygen, hydrogen peroxide, and alkyl hydroperoxides as primary oxidants. Other chapters explore stoichiometric oxidations with metal oxidants, which include permanganate and chromic acid. This book discusses as well the synthetic applications of catalytic oxidations as well as the technology of petrochemical oxidation. The final chapter deals with the autoxidations of sulfur, phosphorus, and nitrogen compounds. This book is intended for chemists involved in organic synthesis, catalysis, and organometallic chemistry, both in academic institutions and in industrial laboratories.

Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.

Download or read book Chemical Process Design written by Alexandre C. Dimian and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical how-to-do book deals with the design of sustainable chemical processes by means of systematic methods aided by computer simulation. Ample case studies illustrate generic creative issues, as well as the efficient use of simulation techniques, with each one standing for an important issue taken from practice. The didactic approach guides readers from basic knowledge to mastering complex flow-sheets, starting with chemistry and thermodynamics, via process synthesis, efficient use of energy and waste minimization, right up to plant-wide control and process dynamics. The simulation results are compared with flow-sheets and performance indices of actual industrial licensed processes, while the complete input data for all the case studies is also provided, allowing readers to reproduce the results with their own simulators. For everyone interested in the design of innovative chemical processes.

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Nanostructured Catalysts written by Christian Hess and published by Royal Society of Chemistry. This book was released on 2011-07-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive up-to-date summary of the existing information on the structural/electronic properties, chemistry and catalytic properties of vanadium and molybdenum containing catalysts. It discusses the importance of nanoscience for the controlled synthesis of catalysts with functional properties and introduces the necessary background regarding surface properties and preparation techniques, leading from a textbook level to the current state of knowledge. Then follows an extensive survey and analysis of the existing open and patent literature - an essential knowledge source for the development of the new generation of partial oxidation catalysts. Important examples from current research on partial oxidation reactions are reviewed from experts in the field. The next chapter discusses the importance of 2- and 3-dimensional model systems for a fundamental understanding of the structure of transition metal oxide catalysts and its correlation to reactivity. Finally, an outlook on research opportunities within the area of partial oxidation reactions is presented.

Download or read book Chemicals and Fuels from Bio Based Building Blocks written by Fabrizio Cavani and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date and two volume overview of recent developments in the field of chemocatalytic and enzymatic processes for the transformation of renewable material into essential chemicals and fuels. Experts from both academia and industry discuss catalytic processes currently under development as well as those already in commercial use for the production of bio-fuels and bio-based commodity chemicals. As such, they cover drop-in commodity chemicals and fuels, as well as bio-based monomers and polymers, such as acrylic acid, glycols, polyesters and polyolefins. In addition, they also describe reactions applied to waste and biomass valorization and integrated biorefining strategies. With its comprehensive coverage of the topic, this is an indispensable reference for chemists working in the field of catalysis, industrial chemistry, sustainable chemistry, and polymer synthesis.

Download or read book Nanocatalysis written by Vanesa Calvino-Casilda and published by CRC Press. This book was released on 2019-02-14 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis and design of new nanocatalysts is an important area of research that aims to introduce multiple types of useful applications in a greener market. The necessity of nanostructuring the active sites has emerged as the key point in a successful design of the catalysts. The book covers the progress in this research area done in the last ten years. It includes the classification of catalysts and structure of active sites at the nanoscale. The book covers examples to present the concept, evolution of nanocatalysts from the perspective of chemistry of materials and their applications.

Download or read book Chemical Technology written by Andreas Jess and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated edition of a popular textbook covering the four disciplines of chemical technology?featuring new developments in the field Clear and thorough throughout, this textbook covers the major sub-disciplines of modern chemical technology?chemistry, thermal and mechanical unit operations, chemical reaction engineering, and general chemical technology?alongside raw materials, energy sources and detailed descriptions of 24 important industrial processes and products. It brings information on energy and raw material consumption and production data of chemicals up to date and offers not just improved and extended chapters, but completely new ones as well. This new edition of Chemical Technology: From Principles to Products features a new chapter illustrating the global economic map and its development from the 15th century until today, and another on energy consumption in human history. Chemical key technologies for a future sustainable energy system such as power-to-X and hydrogen storage are now also examined. Chapters on inorganic products, material reserves, and water consumption and resources have been extended, while another presents environmental aspects of plastic pollution and handling of plastic waste. The book also adds four important processes to its pages: production of titanium dioxide, silicon, production and chemical recycling of polytetrafluoroethylene, and fermentative synthesis of amino acids. -Provides comprehensive coverage of chemical technology?from the fundamentals to 24 of the most important processes -Intertwines the four disciplines of chemical technology: chemistry, thermal and mechanical unit operations, chemical reaction engineering and general chemical technology -Fully updated with new content on: power-to-X and hydrogen storage; inorganic products, including metals, glass, and ceramics; water consumption and pollution; and additional industrial processes -Written by authors with extensive experience in teaching the topic and helping students understand the complex concepts Chemical Technology: From Principles to Products, Second Edition is an ideal textbook for advanced students of chemical technology and will appeal to anyone in chemical engineering.

Download or read book The Mechanisms of Pyrolysis Oxidation and Burning of Organic Materials written by Leo Aloysius Wall and published by . This book was released on 1972 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Industrial Chemistry written by Fabrizio Cavani and published by John Wiley & Sons. This book was released on 2009-09-22 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the need for sustainable process design and alternative reaction routes to reduce industry?s impact on the environment has gained vital importance. The book begins with a general overview of new trends in designing industrial chemical processes which are environmentally friendly and economically feasible. Specific examples written by experts from industry cover the possibilities of running industrial chemical processes in a sustainable manner and provide an up-to-date insight into the main concerns, e.g., the use of renewable raw materials, the use of alternative energy sources in chemical processes, the design of intrinsically safe processes, microreactor and integrated reaction/ separation technologies, process intensification, waste reduction, new catalytic routes and/or solvent and process optimization.

Download or read book Industrial Organic Chemistry written by Klaus Weissermel and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Ideal for getting an overview of applied organic chemistry' This bestselling standard, now in its 3rd completely revised English edition, is an excellent source of technological and economic information on the most important precursors and intermediates used in the chemical industry. Right and left columns containing synopsis of the main text and statistical data, and numerous fold-out flow diagrams ensure optimal didactic presentation of complex chemical processes. The translation into eight languages, the four German and three English editions clearly evidence the popularity of this book. '... it is where I look first to get a quick overview of the manufacturing process of a product... Weissermel/Arpe has been serving me for years as an indispensable reference work.' (Berichte der Bunsengesellschaft für Physikalische Chemie) 'Whether student or scientist, theorist or practician - everyboby interested in industrial organic chemistry will appreciate this work.' (farbe + lack) '...it should be ready to hand to every chemist or process engineer envolved directly or indirectly with industrial organic chemistry . It should be in the hand of every higher-graduate student, especially if chemical technology is not part of the study, like in many college universities...' (Tenside-Surfactants-Detergents)