Download or read book Propulsion and steering in ship model written by Siegfried Frohn and published by Verlag für Technik und Handwerk. This book was released on with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Often it is the most trivial things, even for a tinkering professional, that cause even the most beautiful shipbuilding project to fail. What could be more obvious than to be able to recognize to be able to recognize, avoid and eliminate them right from the start. Tips and tricks from decades of experience in model building are provided here by Siegfried Frohn. You will not find these tricks in any building manual! All basic concepts are explained and conveyed in a clear manner. Not least by the numerous illustrations and photos even beginners can easily understand the interesting subject of ship model building. From the content: • Basic knowledge of ship model building • Construction description, construction plan and parts lists • Remote control and receiver system on/off switch, charging socket, antenna • Servos and steering gear • Causes for reception disturbances • Speed controller and motors • Installation of the motor • Direction of rotation of the motor • Motor interference suppression for model ship builders • The range of the remote-control system • The basic concepts of battery technology • Charging, charging time, maintenance and care • The right charger • Series and parallel connection of batteries • Rudder systems, single and multiple rudder operation, bow thrusters • Material, size, number of blades and direction of rotation of a propeller • Special functions such as loudspeakers and water pumps • Sources of errors and their elimination • Collection of formulas for beginners in ship model building

Download or read book Shiphandling for the Mariner written by Daniel H. MacElrevey and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 2018-02-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its 5th edition, Shiphandling for the Mariner is the classic and definitive text on the art of practical shiphandling skills for large, modern commercial vessels. Written by a father and son team of pilots, along with contributions from other expert pilots and shipmasters, this compendium follows a nontechnical format that stresses maneuvers used routinely in the field. The text covers essential maneuvers used in docking, undocking, and shiphandling, plus uncommon maneuvers such as docking at single-point and multiple-buoy moorings, use of anchors in shiphandling, offshore lightering, and transiting of locks and canals. Bridge practices in pilot waters and training techniques, including simulator training are also discussed. Updated for the 5th edition: squat and under keel clearance, current practices for bridge resource management, and the use of laptop navigation systems and ECDIS in pilotage waters. Shiphandling for the Mariner is ideal for those with a foundation of practical knowledge looking to advance and master shiphandling skills that are essential to the marine profession.

Download or read book The Maritime Engineering Reference Book written by Anthony F. Molland and published by Elsevier. This book was released on 2011-10-13 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Maritime Engineering Reference Book is a one-stop source for engineers involved in marine engineering and naval architecture. In this essential reference, Anthony F. Molland has brought together the work of a number of the world's leading writers in the field to create an inclusive volume for a wide audience of marine engineers, naval architects and those involved in marine operations, insurance and other related fields. Coverage ranges from the basics to more advanced topics in ship design, construction and operation. All the key areas are covered, including ship flotation and stability, ship structures, propulsion, seakeeping and maneuvering. The marine environment and maritime safety are explored as well as new technologies, such as computer aided ship design and remotely operated vehicles (ROVs).Facts, figures and data from world-leading experts makes this an invaluable ready-reference for those involved in the field of maritime engineering.Professor A.F. Molland, BSc, MSc, PhD, CEng, FRINA. is Emeritus Professor of Ship Design at the University of Southampton, UK. He has lectured ship design and operation for many years. He has carried out extensive research and published widely on ship design and various aspects of ship hydrodynamics.* A comprehensive overview from best-selling authors including Bryan Barrass, Rawson and Tupper, and David Eyres* Covers basic and advanced material on marine engineering and Naval Architecture topics* Have key facts, figures and data to hand in one complete reference book

Download or read book Marine Propellers and Propulsion written by John Carlton and published by Butterworth-Heinemann. This book was released on 2012-10-30 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early development of the screw propeller. Propeller geometry. The propeller environment. The ship wake field, propeller performance characteristics.

Download or read book Shiphandling Simulation written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of major shipping disasters on all coasts, the safety of vessel operations in U.S. ports and waterways and the effectiveness of waterway designs are under increased scrutiny. But are traditional waterway design practices that rely heavily on rules of thumb and conservatism providing adequate margins of safety while keeping the overall costs of waterway projects within the funding capabilities of local project sponsors? Shiphandling Simulation addresses how computer-based simulation can be used to improve the cost- effectiveness of waterway design while satisfying safety objectives. The book examines the role of computer simulation in improving waterway design, evaluates the adequacy of data input, explores the validity of hydrodynamic and mathematical models, assesses required and achievable accuracy of simulation results, and identifies research needed to establish shiphandling simulation as a standard design aid. Case studies of waterway design efforts employing shiphandling simulation are analyzed and lessons learned are identified.

Download or read book Functions in the ship model written by Günther Slansky and published by Verlag für Technik und Handwerk. This book was released on with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Would you like to breathe a little more life into your model ships by adding special, supplementary, and special functions? With some basic knowledge of electrics and electromechanics, it is possible! Whether you are a beginner or an advanced modeller - draw from the author's more than 50 years of modelling experience. After an introduction to the basics of electrical engineering, Günther Slansky shows you detailed electromechanical solutions with many drawings and pictures, right up to the complete functional set-up - both for remote-controlled driving models and for the so-called stand-alone and showcase models. From the content: • Basics of electrical engineering • Commercially available electronic components • Electric motors, relays, and servos • Electric power from batteries and 230 V mains • General basic circuits • Lighting, motor interference suppression, polarity reversal • Limit switch control, rectification • Electronic single and dual-channel switches • Constructive solutions • Functions with rotary movements • Functions with longitudinal movements • Function programmes • Basic functions of drive systems • Moving figures • Moving equipment • Special functions • Literature recommendations • The strike price shown here is the lowest price of the last 30 days for this product.

Download or read book Practical Design of Ships and Other Floating Structures written by Tetsuo Okada and published by Springer Nature. This book was released on 2020-10-05 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed proceedings of the 14th International Symposium, PRADS 2019, held in Yokohama, Japan, in September 2019. It brings together naval architects, engineers, academic researchers and professionals who are involved in ships and other floating structures to share the latest research advances in the field. The contents cover a broad range of topics, including design synthesis for ships and floating systems, production, hydrodynamics, and structures and materials. Reflecting the latest advances, the book will be of interest to researchers and practitioners alike.

Download or read book Ship Resistance and Propulsion written by Anthony F. Molland and published by Cambridge University Press. This book was released on 2011-08-08 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in the ship design field, this book provides a comprehensive approach to evaluating ship resistance and propulsion.

Download or read book Contemporary Ideas on Ship Stability written by Kostas J. Spyrou and published by Springer Nature. This book was released on 2023-03-28 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a selection of research papers presented in 5 consecutive International Ship Stability Workshops (ISSWs) managed by the STAB International Standing Committee in the period 2013–2019 (2013 Brest, 2014 Kuala Lumpur, 2016 Stockholm, 2017 Belgrade, 2019 Helsinki). ISSWs are a long-standing and authoritative series of international technical meetings in the field of stability of ships and ocean vehicles. The book is the fourth of a line of books started 20 years ago and having the main title “Contemporary Ideas on Ship Stability”. It focuses on the state-of-the-art ship stability criteria and covers topics such as ship dynamics in waves, roll damping, stability of damaged ships, model experiments, and effect of stability requirements on ship design and operation. This book helps the readers to understand the current state of the art in the field of ship stability and see how this comes into the development of modern criteria of ship design and operation.

Download or read book Analysis and Design of Marine Structures V written by C. Guedes Soares and published by CRC Press. This book was released on 2015-03-11 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design of Marine Structures V contains the papers presented at MARSTRUCT 2015, the 5th International Conference on Marine Structures (Southampton, UK, 25-27 March 2015). The MARSTRUCT series of conferences started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal (2009), while the third was in Hambur

Download or read book General Register written by University of Michigan and published by . This book was released on 1923 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Announcements for the following year included in some vols.

Download or read book Catalogue of the University of Michigan written by University of Michigan and published by . This book was released on 1960 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Announcements for the following year included in some vols.

Download or read book Hydrodynamics of High Speed Marine Vehicles written by Odd M. Faltinsen and published by Cambridge University Press. This book was released on 2006-01-09 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of High-Speed Marine Vehicles, first published in 2006, discusses the three main categories of high-speed marine vehicles - vessels supported by submerged hulls, air cushions or foils. The wave environment, resistance, propulsion, seakeeping, sea loads and manoeuvring are extensively covered based on rational and simplified methods. Links to automatic control and structural mechanics are emphasized. A detailed description of waterjet propulsion is given and the effect of water depth on wash, resistance, sinkage and trim is discussed. Chapter topics include resistance and wash; slamming; air cushion-supported vessels, including a detailed discussion of wave-excited resonant oscillations in air cushion; and hydrofoil vessels. The book contains numerous illustrations, examples and exercises.

Download or read book Model ships with steam propulsion written by Thomas Hillenbrand and published by Verlag für Technik und Handwerk. This book was released on with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next to railways, they are the epitome of historical technology: steamships. No wonder, then, that they also have a special appeal for model builders. To drive one's model not simply with an electric motor, but even more originally with a steam engine, is the dream of many technology fans. If the model then moves across the pond, trailing a plume of steam behind it, the enthusiasm is perfect! But how do you build such a model? What are the possibilities? Which models are suitable? These and many more questions are answered in detail by steamship specialist Thomas Hillenbrand in this book. In addition to the basics of technology and construction, he looks at various types of models, most of which he has successfully built himself - some of them very unusual constructions. The book concludes with an example of the construction of a steamship with a simple superstructure - an ideal introduction to this fascinating branch of model building. So, open the throttle and full steam ahead! From the content: • Some of the history of steam-powered ships and models • Steam as a source of power • The steam boiler • Some information about combustion and the firing of steam boilers • The different versions of the propulsion engine • Commissioning, troubleshooting and repair of the steam system • The propulsion systems of the steamship • Suitable models for steam propulsion • Installation of the steam system in the model • Presentation of different steamship models • Building the Steam Launch Presto

Download or read book The Shipbuilder and Marine Engine builder written by and published by . This book was released on 1925 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The entry into the RC ship modelling written by Gerhard O.W. Fischer and published by Verlag für Technik und Handwerk. This book was released on with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gerhard O. W. Fischer will show you how to get to your desired model of your choice. On the basis of modular models, he teaches you working methods which are always repeated for other models. In this way, what you have learned can also be transferred to other models. The author has selected 18 kit models, which have been in the program of the modeling companies for a long time and will continue to be available. will continue to be available. The selection of ship types is broad. Besides an old harbor tug and a modern sea tug, there are also working ships, a cruise ship, small and large motor yachts, high-speed speed racing boats with jet propulsion, and a submarine. From the content: General building instructions, starting with the boat stand to the hull and the RC system Construction kit models: Harbour tug Kalle - Tug Torben - Harbour master boat Kormoran Racing catamaran Powerkat - Sea Jet Evolution Motor yacht Lisa M. - Motor yacht Najade Racing boat Miami - Jet racing boat Seewind - Fishery protection boat Seefalke Nearly finished models: River patrol boat Buzzard - Sport boat Lugano racing boat Wave Explorer - motor yacht San Diego ... as well as some other bigger models for inspiration

Download or read book Collision and Grounding of Ships and Offshore Structures written by Jorgen Amdahl and published by CRC Press. This book was released on 2013-05-14 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collision and Grounding of Ships and Offshore Structures contains the latest research results and innovations presented at the 6th International Conference on Collision and Grounding of Ships and Offshore Structures (Trondheim, Norway, 17-19 June 2013). The book comprises contributions made in the field of numerical and analytical analysis of