Download or read book Methane Conversion Routes written by Vladimir Galvita and published by Royal Society of Chemistry. This book was released on 2023-09-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently the majority of carbon-based feedstocks come from fossil fuels of which there is a finite supply. Methane is an abundantly available carbon-based feedstock, with large amounts now available through fracking and renewable sources available from biogas plants. However, methane is not very chemically reactive. One of the remaining “grand challenges” in chemistry is the development of clean, efficient, affordable processes that allow methane to be converted to other high value molecules. Highlighting the recent advances in methane activation and direct conversion processes this book discusses the progress and current state of the art for a wide variety of alternative methane activation and subsequent conversion processes, including homogeneous and heterogeneous catalytic, electrocatalytic and pyrolytic systems. It is a useful resource for anyone working in green chemistry, catalysis and chemical engineering.

Download or read book Catalytic Oxidation Principles And Applications A Course Of The Netherlands Institute For Catalysis Research Niok written by R A Sheldon and published by World Scientific. This book was released on 1995-10-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of lectures presented by international authorities in the field, at a course on Oxidation Catalysis organized by the Dutch Research School in Catalysis at Rolduc in June 1994.The material covered spans the whole range of the subject from the fundamental principles of gas and liquid phase oxidations to reactor engineering for industrial processing. The use of catalytic oxidation in both bulk and fine chemicals manufacture and the different types of catalysis — heterogeneous-gas phase, homogeneous-liquid phase and heterogeneous-liquid phase — are discussed. In addition, a few special topics, such as electrocatalytic and high-temperature oxidation are dealt with.The book is intended for graduate students or industrial researchers who wish to acquaint themselves with the underlying principles of catalytic oxidations and the numerous applications of this important technology.

Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Download or read book Direct Natural Gas Conversion to Value Added Chemicals written by Jianli Hu and published by CRC Press. This book was released on 2020-09-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Natural Gas Conversion to Value-Added Chemicals comprehensively discusses all major aspects of natural gas conversion and introduces a broad spectrum of recent technological developments. Specifically, the book describes heterogeneous and homogeneous catalysis, microwave-assisted conversion, non-thermal plasma conversion, electrochemical conversion, and novel chemical looping conversion approaches. Provides an excellent benchmark resource for the industry and academics Appeals to experienced researchers as well as newcomers to the field, despite the variety of contributing authors and the complexity of the material covered Includes all aspects of direct natural gas conversion: fundamental chemistry, different routes of conversion, catalysts, catalyst deactivation, reaction engineering, novel conversion concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development Discusses new developments in natural gas conversion and future challenges and opportunities This book is as an excellent resource for advanced students, technology developers, and researchers in chemical engineering, industrial chemistry, and others interested in the conversion of natural gas.

Download or read book Annual Reports in Computational Chemistry written by David A. Dixon and published by Elsevier. This book was released on 2019-10-19 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annual Reports in Computational Chemistry, Volume 15, provides timely and critical reviews of important topics in computational chemistry. Topics covered in this series include quantum chemistry, molecular mechanics, force fields, chemical education, and applications in academic and industrial settings. Focusing on the most recent literature and advances in the field, each article covers a specific topic of importance to computational chemists. - Includes timely discussions on quantum chemistry and molecular mechanics - Covers force fields, chemical education, and more - Presents the latest in chemical education and applications in both academic and industrial settings

Download or read book Chemical Technology written by Andreas Jess and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated edition of a popular textbook covering the four disciplines of chemical technology?featuring new developments in the field Clear and thorough throughout, this textbook covers the major sub-disciplines of modern chemical technology?chemistry, thermal and mechanical unit operations, chemical reaction engineering, and general chemical technology?alongside raw materials, energy sources and detailed descriptions of 24 important industrial processes and products. It brings information on energy and raw material consumption and production data of chemicals up to date and offers not just improved and extended chapters, but completely new ones as well. This new edition of Chemical Technology: From Principles to Products features a new chapter illustrating the global economic map and its development from the 15th century until today, and another on energy consumption in human history. Chemical key technologies for a future sustainable energy system such as power-to-X and hydrogen storage are now also examined. Chapters on inorganic products, material reserves, and water consumption and resources have been extended, while another presents environmental aspects of plastic pollution and handling of plastic waste. The book also adds four important processes to its pages: production of titanium dioxide, silicon, production and chemical recycling of polytetrafluoroethylene, and fermentative synthesis of amino acids. -Provides comprehensive coverage of chemical technology?from the fundamentals to 24 of the most important processes -Intertwines the four disciplines of chemical technology: chemistry, thermal and mechanical unit operations, chemical reaction engineering and general chemical technology -Fully updated with new content on: power-to-X and hydrogen storage; inorganic products, including metals, glass, and ceramics; water consumption and pollution; and additional industrial processes -Written by authors with extensive experience in teaching the topic and helping students understand the complex concepts Chemical Technology: From Principles to Products, Second Edition is an ideal textbook for advanced students of chemical technology and will appeal to anyone in chemical engineering.

Download or read book Chemical Looping Partial Oxidation written by Liang-Shih Fan and published by Cambridge University Press. This book was released on 2017-10-12 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive guide to the principles and techniques of chemical looping partial oxidation. With authoritative explanations from a pioneer of the chemical looping process, you will: • Gain a holistic overview of metal oxide reaction engineering, with coverage of ionic diffusion, nanostructure formation, morphological evolution, phase equilibrium, and recyclability properties of metal oxides during redox reactions • Learn about the gasification of solid fuels, the reforming of natural gas, and the catalytic conversion of methane to olefins • Understand the importance of reactor design and process integration in enabling metal oxide oxygen carriers to produce desired products • Discover other applications of catalytic metal oxides, including the production of maleic anhydride and solar energy conversions Aspen Plus® simulation software and results accompany the book online. This is an invaluable reference for researchers and industry professionals in the fields of chemical, energy and environmental engineering, and students studying process design and optimization.

Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.

Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Download or read book Preparation of Catalysts VI written by G. Poncelet and published by Elsevier. This book was released on 1995-03-24 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The organizers of this Sixth Symposium maintained their initial objectives, namely to gather experts from both industries and universities to discuss the scientific problems involved in the preparation of heterogeneous catalysts, and to encourage as much as possible the presentation of research work on catalysts of real industrial significance. Another highlight of these symposia is to reserve a substantial part of the program to new developments in catalyst preparation, new preparation methods and new catalytic systems. The fact that chemical reactions which were hardly conceivable some years ago have become possible today through the development of appropriate catalytic systems proves that catalysis is in constant progress.The papers in this volume deal with preparation of new catalysts and supports, catalyst preparation via sol-gel methods, supported catalysts and synthesis of nanometer size catalysts.

Download or read book Methane and its Derivatives written by Sunggyu Lee and published by CRC Press. This book was released on 1996-10-18 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Covers the chemistry, process chemistry, technology, engineering, and economics of methane conversion, including its environmental impact and commercial exploitation. Begins with methane's availability and increasing importance as an environmentally acceptable natural resource alternative and feedstock."

Download or read book Third World Congress on Oxidation Catalysis written by S.T. Oyama and published by Elsevier. This book was released on 1997-09-12 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall theme of the 3rd World Congress is "Atom Efficient Catalytic Oxidations for Global Technologies". This theme was chosen to stimulate the participants to report their findings with an emphasis on conserving valuable material in their catalytic transformations, as well as conserving energy, in an environmentally responsible manner. Progress towards this stated goal is substantial as evidenced by the tremendous response of the community in their participation of quality publications complied in these Proceedings of the Congress.The subjects presented span a wide range of oxidation reactions and catalysts. These include the currently important area of lower alkane oxidation to the corresponding olefins, unsaturated aldehydes, acids and nitriles.The four featured lectures and seven plenary lectures constitute the general background and overview of the subject matter at hand. The 104 contributed papers and 13 poster manuscripts, summarized in this compendium, probe new avenues to achieve catalytically efficient oxidation reactions for the future needs of mankind in a global environment.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Technology 2019 written by Tao Wang and published by Springer. This book was released on 2019-02-09 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection addresses the need for sustainable technologies with reduced energy consumption and pollutants and the development and application of alternative sustainable energy to maintain a green environment and energy supply. Contributions focus on energy-efficient technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy technologies. Papers also cover various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers from the following symposia are presented in the book: Energy Technologies and Carbon Dioxide Management Solar Cell Silicon Advanced Materials for Energy Conversion and Storage

Download or read book New Developments in Selective Oxidation II written by V. Cortés Corberán and published by Elsevier. This book was released on 1994-06-21 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains invited papers and communications presented at the Second World Congress and Fourth European Workshop Meeting on New Developments in Selective Oxidation. The purpose of the meeting was to present new topics and recent advances as well as the discussion of new aspects of fundamental and applied aspects of partial selective oxidation in heterogeneous and homogeneous catalysis. The following topics were discussed: New processes for fine chemicals by catalytic oxidation; Recent developments in surface chemistry of oxide catalysts; Novel catalytic systems and preparation methods; Heterogenized homogeneous oxidation catalysts; Selective oxidation and oxidative dehydrogenation of alkanes; New industrial developments based on catalytic oxidation reactions; Bio-, photo-, and electro-catalytic oxidation; Oxidation by other agents than dioxygen; Bifunctional metal-on-metal oxide catalysts for selective oxidation.This book provides a valuable set of data on selective oxidation reactions which will be extremely useful to catalyst and related practitioners, whether fundamentalists or highly applied, and to process engineers who wish to evaluate current findings in this field.

Download or read book Ammonia Synthesis Catalysts Innovation And Practice written by Huazhang Liu and published by World Scientific. This book was released on 2013-03-21 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of worldwide developments in ammonia synthesis catalysts over the last 30 years. It focuses on the new generation of Fe1-xO based catalysts and ruthenium catalysts — both are major breakthroughs for fused iron catalysts. The basic theory for ammonia synthesis is systematically explained, covering topics such as the chemical components, crystal structure, preparation, reduction, performance evaluation, characterization of the catalysts, the mechanism and kinetics of ammonia synthesis reaction. Both theory and practice are combined in this presentation, with emphasis on the research methods, application and exploitation of catalysts.The comprehensive volume includes an assessment of the economic and engineering aspects of ammonia plants based on the performance of catalysts. Recent developments in photo-catalysis, electro-catalysis, biocatalysis and new uses of ammonia are also introduced in this book.The author, Professor Huazhang Liu, has been engaged in research and practice for more than 50 years in this field and was the inventor of the first Fe1-xO based catalysts in the world. He has done a lot of research on Fe3O4 based- and ruthenium based-catalysts, and has published more than 300 papers and obtained 21 patents during his career.