Download or read book Semiconductors written by Martin I. Pech-Canul and published by Springer. This book was released on 2019-01-17 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to optical, optoelectronic, and semiconductor materials and provides an overview of the topic from its fundamentals to cutting-edge processing routes to groundbreaking technologies for the most recent applications. The book details the characterization and properties of these materials. Chemical methods of synthesis are emphasized by the authors throughout the publication. Describes new materials and updates to older materials that exhibit optical, optoelectronic and semiconductor behaviors; Covers the structural and mechanical aspects of the optical, optoelectronic and semiconductor materials for meeting mechanical property and safety requirements; Includes discussion of the environmental and sustainability issues regarding optical, optoelectronic, and semiconductor materials, from processing to recycling.
Download or read book Intelligent Coatings for Corrosion Control written by Atul Tiwari and published by Butterworth-Heinemann. This book was released on 2014-10-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Coatings for Corrosion Control covers the most current and comprehensive information on the emerging field of intelligent coatings. The book begins with a fundamental discussion of corrosion and corrosion protection through coatings, setting the stage for deeper discussion of the various types of smart coatings currently in use and in development, outlining their methods of synthesis and characterization, and their applications in a variety of corrosion settings. Further chapters provide insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. - Reviews fundamentals of corrosion and coatings for corrosion control before delving into a discussion of intelligent coatings—useful for researchers and grad students new to the subject - Covers the most current developments in intelligent coatings for corrosion control as presented by top researchers in the field - Includes many examples of current and potential applications of smart coatings to a variety of corrosion problems
Download or read book Uncooled Infrared Imaging Arrays and Systems written by and published by Academic Press. This book was released on 1997-11-24 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to describe an emerging but already growing technology of thermal imaging based on uncooled infrared imaging arrays and systems, which are the most exciting new developments in infrared technology today. This technology is of great importance to developers and users of thermal images for military and commercial applications. The chapters, prepared by world leaders in the technology, describe not only the mainstream efforts, but also exciting new approaches and fundamental limits applicable to all. - Unified approach to technology development based on fundamental limits - Individual chapters written by world leaders in each technology - Novel potential approaches, allowing for the reduction of costs, described in detail - Descriptive and analytical - Provides details of the mainstream approaches--resistive bolometric, pyroelectric/field enhanced pyroelectric, thermoelectric - Provides insight into a unified approach to development of all types of thermal imaging arrays Features state-of-the-art and selected new developments
Download or read book Infrared Detectors and Emitters Materials and Devices written by Peter Capper and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date view of the various detector/emitter materials systems currently in use or being actively researched. The book is aimed at newcomers and those already working in the IR industry. It provides both an introductory text and a valuable overview of the entire field.
Download or read book Standard X ray Diffraction Powder Patterns written by and published by . This book was released on 1953 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Vanadium written by Robert Bowell and published by Nova Science Publishers. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Vanadium has, in the last two years, developed new uses, particularly in the field of redox batteries. The expanded use of vanadium reflects the complex redox-related chemistry of the element that allows it to form several oxidation states and to stabilise various chemical compounds. From the initial discovery in Mexico through to the modern day, vanadium has presented a challenge and opportunity for chemists. This volume summarises research and industrial development in understanding the chemistry of vanadium and its presence in natural and synthetic materials. This includes a review of vanadium mineralogy and occurrence in nature. The interaction with biomolecules and environmental dispersion is also discussed. Following on from this section the book delves into the application of vanadium in medical use and in power supply as well as issues related to the extraction of vanadium from its primary ores. The book has been developed by an international team of scientists and engineers with specialist interest in vanadium chemistry and use"--
Download or read book Thin Film Materials Technology written by Kiyotaka Wasa and published by . This book was released on 2004 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Noise Electronic System Design written by C. D. Motchenbacher and published by Wiley-Interscience. This book was released on 1993-06-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whetted to the design needs of engineers of the '90s, this reworking of the classic industry text offers a practical, concrete look at designing low-noise electronic systems with the technological tools of the future. Published originally in 1973 as Low-Noise Electronic Design, the first edition was a practical primer for circuit design and system engineers on designing low-level electronic circuits as well as analyzing low-level sensing and measurement systems. Now newly revised as Low-Noise Electronic System Design, this new edition unfolds the technological hardware speeding the electronics industry towards a new century.
Download or read book Cryogenic Particle Detection written by Hans-Christian Stahl and published by Springer Science & Business Media. This book was released on 2005-06-22 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of cryogenic devices for particle detection has reached a stage at which many interesting applications are conceivable and already have been demonstrated. The book provides a comprehensive review of the field of cryogenic particle detection. It introduces the different detection techniques and gives an overview of the important areas in which these detectors are successfully applied.
Download or read book Functional Nanomaterials written by Sabu Thomas and published by Springer Nature. This book was released on 2020-06-12 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the current state-of-art in oxide nanostructures, carbon nanostructures and 2D materials fabrication. It covers mimicking of sensing mechanisms and applications in gas sensors. It focuses on gas sensors based on functional nanostructured materials, especially related to issues of sensitivity, selectivity, and temperature dependency for sensors. It covers synthesis, properties, and current gas sensing tools and discusses the necessity for miniaturized sensors. This book will be of use to senior undergraduate and graduate students, professionals, and researchers in the field of solid-state physics, materials science, surface science and chemical engineering.
Download or read book Advanced Biomaterials written by Bikramjit Basu and published by John Wiley & Sons. This book was released on 2010-07-02 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables readers to take full advantage of the latest advances in biomaterials and their applications. Advanced Biomaterials: Fundamentals, Processing, and Applications reviews the latest biomaterials discoveries, enabling readers to take full advantage of the most recent findings in order to advance the biomaterials research and development. Reflecting the nature of biomaterials research, the book covers a broad range of disciplines, including such emerging topics as nanobiomaterials, interface tissue engineering, the latest manufacturing techniques, and new polymeric materials. The book, a contributed work, features a team of renowned scientists, engineers, and clinicians from around the world whose expertise spans the many disciplines needed for successful biomaterials development. All readers will gain an improved understanding of the full range of disciplines and design methodologies that are used to develop biomaterials with the physical and biological properties needed for specific clinical applications.
Download or read book Bolometers written by Torrence M. Walcott and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bolometer is a device for measuring the energy of incident electromagnetic radiation. It consists of an "absorber" connected to a heat sink through an insulating link. The result is that any radiation absorbed by the absorber raises its temperature above that of the heat sink; then the higher the energy absorbed, the higher the temperature will be. This book gathers and presents current research in the study of bolometers including investigations of properties of high temperature superconducting bolometers, operating uncooled resistive bolometers in a closed-loop mode, as well as a review on thin-film micro-bolometers with Si-Ge thermo-sensing films deposited from plasma discharge.
Download or read book Elements of Infrared Technology Generation Transmission and Detection written by Paul W. Kruse and published by John Wiley & Sons. This book was released on 1962 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Superlattices Growth And Electronic Properties written by Fernando Agullo-rueda and published by World Scientific. This book was released on 1995-04-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys semiconductor superlattices, in particular their growth and electronic properties in an applied electric field perpendicular to the layers. The main developments in this field, which were achieved in the last five to seven years, are summarized. The electronic properties include transport through minibands at low electric field strengths, the Wannier-Stark localization and Bloch oscillations at intermediate electric field strengths, resonant tunneling of electrons and holes between different subbands, and the formation of electric field domains for large carrier densities at high electric field strengths.
Download or read book Pulsed Laser Deposition of Thin Films written by Robert Eason and published by John Wiley & Sons. This book was released on 2007-12-14 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by major contributors to the field, this text summarizes current or newly emerging pulsed laser deposition application areas. It spans the field of optical devices, electronic materials, sensors and actuators, biomaterials, and organic polymers. Every scientist, technologist and development engineer who has a need to grow and pattern, to apply and use thin film materials will regard this book as a must-have resource.
Download or read book Sputtering Materials for VLSI and Thin Film Devices written by Jaydeep Sarkar and published by William Andrew. This book was released on 2010-12-13 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important resource for students, engineers and researchers working in the area of thin film deposition using physical vapor deposition (e.g. sputtering) for semiconductor, liquid crystal displays, high density recording media and photovoltaic device (e.g. thin film solar cell) manufacturing. This book also reviews microelectronics industry topics such as history of inventions and technology trends, recent developments in sputtering technologies, manufacturing steps that require sputtering of thin films, the properties of thin films and the role of sputtering target performance on overall productivity of various processes. Two unique chapters of this book deal with productivity and troubleshooting issues. The content of the book has been divided into two sections: (a) the first section (Chapter 1 to Chapter 3) has been prepared for the readers from a range of disciplines (e.g. electrical, chemical, chemistry, physics) trying to get an insight into use of sputtered films in various devices (e.g. semiconductor, display, photovoltaic, data storage), basic of sputtering and performance of sputtering target in relation to productivity, and (b) the second section (Chapter 4 to Chapter 8) has been prepared for readers who already have background knowledge of sputter deposition of thin films, materials science principles and interested in the details of sputtering target manufacturing methods, sputtering behavior and thin film properties specific to semiconductor, liquid crystal display, photovoltaic and magnetic data storage applications. In Chapters 5 to 8, a general structure has been used, i.e. a description of the applications of sputtered thin films, sputtering target manufacturing methods (including flow charts), sputtering behavior of targets (e.g. current - voltage relationship, deposition rate) and thin film properties (e.g. microstructure, stresses, electrical properties, in-film particles). While discussing these topics, attempts have been made to include examples from the actual commercial processes to highlight the increased complexity of the commercial processes with the growth of advanced technologies. In addition to personnel working in industry setting, university researchers with advanced knowledge of sputtering would also find discussion of such topics (e.g. attributes of target design, chamber design, target microstructure, sputter surface characteristics, various troubleshooting issues) useful. . - Unique coverage of sputtering target manufacturing methods in the light of semiconductor, displays, data storage and photovoltaic industry requirements - Practical information on technology trends, role of sputtering and major OEMs - Discussion on properties of a wide variety of thin films which include silicides, conductors, diffusion barriers, transparent conducting oxides, magnetic films etc. - Practical case-studies on target performance and troubleshooting - Essential technological information for students, engineers and scientists working in the semiconductor, display, data storage and photovoltaic industry
Download or read book Chalcogenide Glasses written by J-L Adam and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties and functionalities of chalcogenide glasses make them promising materials for photonic applications. Chalcogenide glasses are transparent from the visible to the near infrared region and can be moulded into lenses or drawn into fibres. They have useful commercial applications as components for lenses for infrared cameras, and chalcogenide glass fibres and optical components are used in waveguides for use with lasers, for optical switching, chemical and temperature sensing and phase change memories. Chalcogenide glasses comprehensively reviews the latest technological advances in this field and the industrial applications of the technology.Part one outlines the preparation methods and properties of chalcogenide glasses, including the thermal properties, structure, and optical properties, before going on to discuss mean coordination and topological constraints in chalcogenide network glasses, and the photo-induced phenomena in chalcogenide glasses. This section also covers the ionic conductivity and physical aging of chalcogenide glasses, deposition techniques for chalcogenide thin films, and transparent chalcogenide glass-ceramics. Part two explores the applications of chalcogenide glasses. Topics discussed include rare-earth-doped chalcogenide glass for lasers and amplifiers, the applications of chalcogenide glasses for infrared sensing, microstructured optical fibres for infrared applications, and chalcogenide glass waveguide devices for all-optical signal processing. This section also discusses the control of light on the nanoscale with chalcogenide thin films, chalcogenide glass resists for lithography, and chalcogenide for phase change optical and electrical memories. The book concludes with an overview of chalcogenide glasses as electrolytes for batteries.Chalcogenide glasses comprehensively reviews the latest technological advances and applications of chalcogenide glasses, and is an essential text for academics, materials scientists and electrical engineers working in the photonics and optoelectronics industry. - Outlines preparation methods and properties, and explores applications of chalcogenide glasses. - Covers the ionic conductivity and physical aging of chalcogenide glasses, deposition techniques for chalcogenide thin films, and transparent chalcogenide glass-ceramics - Discusses the control of light on the nanoscale with chalcogenide thin films, chalcogenide glass resists for lithography, and chalcogenide for phase change optical and electrical memories
