Download or read book History of Strength of Materials written by Stephen Timoshenko and published by Courier Corporation. This book was released on 1983-01-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength of materials is that branch of engineering concerned with the deformation and disruption of solids when forces other than changes in position or equilibrium are acting upon them. The development of our understanding of the strength of materials has enabled engineers to establish the forces which can safely be imposed on structure or components, or to choose materials appropriate to the necessary dimensions of structures and components which have to withstand given loads without suffering effects deleterious to their proper functioning. This excellent historical survey of the strength of materials with many references to the theories of elasticity and structures is based on an extensive series of lectures delivered by the author at Stanford University, Palo Alto, California. Timoshenko explores the early roots of the discipline from the great monuments and pyramids of ancient Egypt through the temples, roads, and fortifications of ancient Greece and Rome. The author fixes the formal beginning of the modern science of the strength of materials with the publications of Galileo's book, "Two Sciences," and traces the rise and development as well as industrial and commercial applications of the fledgling science from the seventeenth century through the twentieth century. Timoshenko fleshes out the bare bones of mathematical theory with lucid demonstrations of important equations and brief biographies of highly influential mathematicians, including: Euler, Lagrange, Navier, Thomas Young, Saint-Venant, Franz Neumann, Maxwell, Kelvin, Rayleigh, Klein, Prandtl, and many others. These theories, equations, and biographies are further enhanced by clear discussions of the development of engineering and engineering education in Italy, France, Germany, England, and elsewhere. 245 figures.
Download or read book High temperature Property Data written by Michael F. Rothman and published by ASM International(OH). This book was released on 1988 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume organizes information by alloy so that pertinent data can be found easily. Physical and mechanical properties from room temperature to temperatures in excess of 100 C are shown graphically or in tabular form. All data is thoroughly referenced. Now high-temperature property data can be found in one complete reference! Over 200 alloys are organized by AISI number into 11 major sections: Irons, Carbon Steels, Alloy Steels, ASTM Steels, Low Alloy Constructional Steels, Ultra High Strength Steels, Tool Steels, Maraging Steels, Wrought Stainless Steels, Heat Resistant Casting Alloys, and Wrought Iron-Nickel Alloys and Iron-Nickel Superalloys. Each alloy record lists the designation, specifications, UNS number composition product forms and a comment on the high-temperature properties and applications. Data is then given for physical properties such as density, specific heat, thermal conductivity, thermal expansion, electrical conductivity. Poisons ratio, moduli of elasticity and rigidity, etc. Mechanical properties follow, and include tensile properties, shearing and bearing properties, impact properties, creep, stress rupture and stress relaxation, and fatigue properties.The last part of the alloy record gives other effects of temperature, such as hot hardness, corrosion, and growth.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Elevated temperature Properties of Several Titanium Carbide Base Ceramals written by George C. Deutsch and published by . This book was released on 1949 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: On a strength-to-weight ratio basis, ceramals appeared promising as gas-turbine-blade materials in the temperature range of 1600 to 2400 degrees F.
Download or read book High Temperatures in Aeronautics written by Carlo Ferrari and published by Elsevier. This book was released on 2013-10-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperatures in Aeronautics is a compilation of the proceedings of the Symposium on High Temperatures in Aeronautics held in Turin, Italy, on September 10-12, 1962. The symposium provided a forum to discuss the applications of high temperatures in aeronautics and covers topics ranging from supersonic combustion to non-equilibrium flow through a nozzle, along with similarity parameters in radiation gas-dynamics and photoionization upstream of a strong shock wave. This volume is comprised of 17 chapters and begins with an overview of the effects and consequences of high temperature in aeronautics, followed by an analysis of experimental results for the dissociation of diatomic gases. A theoretical and experimental investigation of mixing and supersonic combustion is then presented, focusing on inviscid flow fields with a finite rate chemistry for a hydrogen-air reaction. Turbulent mixing for flows with large density gradients having no chemical reaction is also considered, and the results of experiments in supersonic combustion are discussed. Subsequent chapters deal with silicon nitride, its properties, and its potential use at elevated temperatures; materials problems at high temperature; and the corrosion of refractory alloys by oil ash containing vanadium. This monograph will be of interest to students, engineers, and experimental workers in the fields of astronautics and aeronautical engineering.
Download or read book High Temperature Deformation and Fracture of Materials written by Jun-Shan Zhang and published by Elsevier. This book was released on 2010-09-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy, petrochemical, aerospace and other industries all require materials able to withstand high temperatures. High temperature strength is defined as the resistance of a material to high temperature deformation and fracture. This important book provides a valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life. - Analyses creep behaviour of materials, the evolution of dislocation substructures during creep, dislocation motion at elevated temperatures and importantly, recovery-creep theories of pure metals - Examines high temperature fracture, including nucleation of creep cavity, diffusional growth and constrained growth of creep cavities - A valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life
Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.
Download or read book Mechanical Properties of Metals and Alloys written by John Laurence Everhart and published by . This book was released on 1943 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equipment for Hardness Testing at Elevated Temperatures written by George Hallerman and published by . This book was released on 1963 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of ASME written by and published by . This book was released on 1927 with total page 1516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Transactions written by American Society of Mechanical Engineers and published by . This book was released on 1925 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 2, 4-11, 62-68 include the Society's Membership list; v. 55-80 include the Journal of applied mechanics (also issued separately) as contributions from the Society's Applied Mechanics Division.
Download or read book Tribology of Metal Cutting written by Viktor P. Astakhov and published by Elsevier. This book was released on 2006-12-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Metal Cutting deals with the emerging field of studies known as Metal Cutting Tribology. Tribology is defined as the science and technology of interactive surfaces moving relative each other. It concentrates on contact physics and mechanics of moving interfaces that generally involve energy dissipation. This book summarizes the available information on metal cutting tribology with a critical review of work done in the past. The book covers the complete system of metal cutting testing. In particular, it presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. It also describes the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. Specialists in the field of metal cutting will find information on how to apply the major principles of metal cutting tribology, or, in other words, how to make the metal cutting tribology to be useful at various levels of applications. The book discusses other novel concepts and principles in the tribology of metal cutting such as the energy partition in the cutting system; versatile metrics of cutting tool wear; optimal cutting temperature and its use in the optimization of the cutting process; the physical concept of cutting tool resource; and embrittlement action. This book is intended for a broad range of readers such as metal cutting tool, cutting insert, and process designers; manufacturing engineers involved in continuous process improvement; research workers who are active or intend to become active in the field; and senior undergraduate and graduate students of manufacturing. · Introduces the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system.· Presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool.· Covers the complete system of metal cutting testing.
Download or read book Reprint Series No 1 5 written by University of Michigan. Research Institute and published by . This book was released on 1927 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid metals Handbook written by and published by . This book was released on 1950 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by National Electric Light Association and published by . This book was released on 1927 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index written by and published by . This book was released on 1924 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Metallography written by M. G. Lozinskii and published by Elsevier. This book was released on 2013-09-11 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Metallography focuses on the reactions, processes, methodologies, and approaches involved in high temperature metallography. The publication first offers information on the basic principles of high temperature vacuum metallography, including the methods of heating test specimens in vacuo to high temperatures; specimens for investigating structure and properties of metals by heating in vacuo; and methods of regulating and controlling the temperature of specimens heated in vacuo. The text then ponders on vacuum systems in equipment for investigating the structure and properties of metals and alloys heated at low ultimate pressures, as well as gas flow through the tubes during evacuation; construction and characteristics of vacuum pumps used for high temperature metallography equipment; and approximate calculation of parameters of vacuum systems for equipment intended for investigating metals during heating in a vacuum. The book takes a look at equipment and instruments for investigating metals heated in a vacuum; method of investigation by studying microstructures and properties of metals and alloys while heated in vacuo; and methods for measuring elasticity, internal friction, and hardness, and for investigating the deformation of metals and alloys at high temperatures in vacuo. The text is a dependable reference for readers interested in high temperature metallography.
