Download or read book Nucleating Agents written by Stuart Fairgrieve and published by iSmithers Rapra Publishing. This book was released on 2007-11 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very important factor in obtaining optimised physical properties from a semi-crystalline polymer is the size of the crystalline structures present in the material, and this crucially depends on the initiation process of crystallisation of the polymer from the melt - nucleation. This review provides information on the development of materials and methods for influencing the nucleation of polymer crystallisation in commercial processing by means of addition of low levels of adjuvants specifically selected for this purpose.
Download or read book Conference Proceedings written by Society of Plastics Engineers. Technical Conference and published by . This book was released on 1999 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 55th Annual Technical Conference written by and published by Taylor & Francis. This book was released on with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoforming written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2025-07-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive reference manual that contains essential information on thermoforming processing and technology. The field of thermoforming is experiencing rapid development driven by commercial factors; millions of tons of polymers are manufactured for use in various applications, both as commodity and specialty polymers. Building on the previous edition published about ten years ago, this edition includes new, as well as, fully revised chapters and updated information on materials and processes. The book is designed to provide practitioners with essential information on processing and technology in a concise manner. The book caters to both engineers and experts by providing introductory aspects, background information, and an overview of thermoforming processing and technology. The troubleshooting section includes flowcharts to assist in correcting thermoforming processes. “Thermoforming: Processing and Technology” offers a complete account of thermoplastics, covering properties and forming, with chapters providing perspective on the technologies involved. Readers will find it: serves as a handy knowledge source for professionals who occasionally work on thermoforming projects or need to refresh their knowledge; offers a troubleshooting guide that can help to identify and solve challenges that may arise in thermoforming processes; provides insights into process optimization, helping businesses improve efficiency, reduce waste, and enhance the quality of thermoformed products; acts as a course book to inform students about the thermoforming process. Audience The book will be of interest to mechanical, materials engineers, and process engineers who are involved in designing and optimizing thermoforming processes; professionals in the manufacturing and production industries who use thermoforming as a manufacturing method, such as in the production of plastic packaging, automotive components, and consumer goods; scientists, researchers, and students in plastics/polymer engineering and technology, materials science, polymer technology; professionals responsible for ensuring product quality and compliance with industry standards.
Download or read book Commercial Polymer Blends written by L.A. Utracki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in depth and unparalleled presentation of the compositions of virtually all polymer blends.
Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Maro Polymer Notes written by and published by . This book was released on 1999 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 2016-02-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Handbook of Thermoplastics incorporates recent developments and advances in thermoplastics with regard to materials development, processing, properties, and applications. With contributions from 65 internationally recognized authorities in the field, the second edition features new and updated discussions of seve
Download or read book Practical Guide to Polyethylene written by Cornelia Vasile and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide begins with general background to the polyethylene family, with price, production and market share information. It describes the basic types of polyethylene including virgin and filled polyethylene, copolymers, block and graft polymers and composites, and reviews the types of additives used in polyethylene. It gives the low down on the properties, including, amongst others, rheological, mechanical, chemical, thermal, and electrical properties. It goes on to describe the processing issues and conditions for the wide range of techniques used for polyethylene, and also considers post-processing and assembly issues. It offers guidance on product design and development issues, including materials selection. It is an indispensable resource for everyone working with this material.
Download or read book Design of Extrusion Forming Tools written by Olga Carneiro and published by Smithers Rapra. This book was released on 2012-12-19 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by Elsevier. This book was released on 2010-03-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.
Download or read book Concise Polymeric Materials Encyclopedia written by Joseph C. Salamone and published by CRC Press. This book was released on 1998-08-28 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise Polymeric Materials Encyclopedia culls the most used, widely applicable articles from the Polymeric Materials Encyclopedia - more than 1,100 - and presents them to you in a condensed, well-ordered format. Featuring contributions from more than 1,800 scientists from all over the world, the book discusses a vast array of subjects related to the: synthesis, properties, and applications of polymeric materials development of modern catalysts in preparing new or modified polymers modification of existing polymers by chemical and physical processes biologically oriented polymers This comprehensive, easy-to-use resource on modern polymeric materials serves as an invaluable addition to reference collections in the polymer field.
Download or read book Automotive Plastics and Composites written by Joseph P. Greene and published by William Andrew. This book was released on 2021-06-23 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material, and considers the manufacture, processing, properties, shrinkage, and possible applications, in each case. Two chapters on polymer processing provide detailed information on both closed-mold and open-mold processing. The final chapters explain other key aspects, such as recycling and sustainability, design principles, tooling, and future trends. This book is an ideal reference for plastics engineers, product designers, technicians, scientists, and R&D professionals who are looking to develop materials, components, or products for automotive applications. The book also intends to guide researchers, scientists, and advanced students in plastics engineering, polymer processing, and materials science and engineering. - Analyzes mechanical, chemical, physical, and thermal properties, enabling the reader to select the appropriate material for specific applications - Explains polymer processing, with thorough coverage of operations across both closed-mold and open-mold processing - Provides systematic coverage of materials, including commodity and engineering thermoplastics, bio-based plastics, thermosets, composites, elastomeric polymers, and 3D-printed plastics
Download or read book Tailor Made Polymers written by John R. Severn and published by Wiley-VCH. This book was released on 2008-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive handbook on this exciting field provides readers with a clear understanding of the current state of the art, ingenious solutions and opportunities. Researchers from academia and industry present such emerging topics as multi-component systems and computational chemistry, as well as the latest developments in competing and complementary technologies. The result is a well-balanced and up-to-date overview.
Download or read book Tropical and Subtropical Fruits written by Muhammad Siddiq and published by John Wiley & Sons. This book was released on 2012-08-07 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tropical and sub-tropical fruits have gained significant importance in global commerce. This book examines recent developments in the area of fruit technology including: postharvest physiology and storage; novel processing technologies applied to fruits; and in-depth coverage on processing, packaging, and nutritional quality of tropical and sub-tropical fruits. This contemporary handbook uniquely presents current knowledge and practices in the value chain of tropical and subtropical fruits world-wide, covering production and post-harvest practices, innovative processing technologies, packaging, and quality management. Chapters are devoted to each major and minor tropical fruit (mango, pineapple, banana, papaya, date, guava, passion fruit, lychee, coconut, logan, carombola) and each citrus and non-citrus sub-tropical fruit (orange, grapefruit, lemon/lime, mandarin/tangerine, melons, avocado, kiwifruit, pomegranate, olive, fig, cherimoya, jackfruit, mangosteen). Topical coverage for each fruit is extensive, including: current storage and shipping practices; shelf life extension and quality; microbial issues and food safety aspects of fresh-cut products; processing operations such as grading, cleaning, size-reduction, blanching, filling, canning, freezing, and drying; and effects of processing on nutrients and bioavailability. With chapters compiled from experts worldwide, this book is an essential reference for all professionals in the fruit industry.
