Download or read book Engineering Materials Technology written by James A. Jacobs and published by Prentice Hall. This book was released on 1985 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Processing and Properties written by Jonathan S. Morrell and published by Springer Science & Business Media. This book was released on 2013-07-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.
Download or read book Advanced Processing Properties and Applications of Starch and Other Bio based Polymers written by Faris M. Al-Oqla and published by Elsevier. This book was released on 2020-08-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Processing, Properties, and Applications of Starch and Other Bio-based Polymers presents the latest cutting-edge research into the processing and applications of bio-based polymers, for novel industrial applications across areas including biomedical and electronics. The book is divided into three sections, covering processing and manufacture, properties, and applications. Throughout the book, key aspects of sustainability are considered, including improved utilization of available natural resources, sustainable design possibilities, cleaner production processes, and waste management. Focuses on starch-based polymers, examining the latest advances in processing and applications with this valuable category of biopolymer Highlights industrial sustainability considerations at all steps of the process, including when sourcing materials, designing and producing products, and dealing with waste Supports the processing and development of starch and other bio-based polymers with enhanced functionality for advanced applications
Download or read book Physical Properties of Foods and Food Processing Systems written by M J Lewis and published by Elsevier. This book was released on 1990-01-01 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an invaluable introduction to the physical properties of foods and the physics involved in food processing. It provides descriptions and data that are needed for selecting the most appropriate equipment in food technology and for making food processing calculations.
Download or read book Biobased Industrial Products written by National Research Council and published by National Academies Press. This book was released on 2000-02-16 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum-based industrial products have gradually replaced products derived from biological materials. However, biologically based products are making a comebackâ€"because of a threefold increase in farm productivity and new technologies. Biobased Industrial Products envisions a biobased industrial future, where starch will be used to make biopolymers and vegetable oils will become a routine component in lubricants and detergents. Biobased Industrial Products overviews the U.S. land resources available for agricultural production, summarizes plant materials currently produced, and describes prospects for increasing varieties and yields. The committee discusses the concept of the biorefinery and outlines proven and potential thermal, mechanical, and chemical technologies for conversion of natural resources to industrial applications. The committee also illustrates the developmental dynamics of biobased products through existing examples, as well as products still on the drawing board, and it identifies priorities for research and development.
Download or read book Food Processing Technologies written by Amit K. Jaiswal and published by CRC Press. This book was released on 2016-08-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of food generally implies the transformation of the perishable raw food to value-added products. It imparts benefits, such as the destruction of surface microflora, and inactivation of deleterious enzymes, such as peroxidase, leading to a greater shelf life of the food. It also enhances color and texture while maintaining quality of products and makes them edible. However, it also has an inevitable impact on nutritional quality attributes, such as increase or decrease in certain vitamins and bioactive metabolites among others. Food Processing Technologies: Impact on Product Attributes covers a range of food processing technologies and their effect on various food product attributes, such as bioactive compounds, safety, and sensory and nutritional aspects of the food upon processing. There are eight major parts in the book. Part I covers the conventional processing technologies. Parts II, III, IV, and V deal with various novel processing technologies, including impingement processing technologies, electro-magnetic processing technologies, physico-mechanical processing technologies, and electro-technologies. Part VI introduces chemical processing technologies. Part VII comprise irradiation processing technology, and the final part is focused on biological processing technology, detailing the application of enzymes in food processing. Numerous studies were carried out to find the impact of these processing technologies on various aspects of food and associated health promotion properties. Both positive and negative results were obtained based on nature of foods, processing type, and duration of processing, and this book covers these results in depth.
Download or read book Carotenoids Properties Processing and Applications written by Charis M. Galanakis and published by Academic Press. This book was released on 2019-08-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carotenoids: Properties, Processing, and Applications fills the gap of transfer knowledge between academia and industry, covering integral information in three critical dimensions: properties, recovery and applications. At the moment, carotenoid research is directed at particular applications, including colorants, antioxidants and recovery from plant processing by-products. These trends take into account the health, nutrition and functions of carotenoids, the new recovery efforts from underutilized sources, the extraction procedures using green solvents and technologies, and their sustainability aspects. Written by a team of experts in the field of food chemistry, food science and technology, as well as bioresource technologists mainly from academia, the book covers the most recent advances in the field of carotenoids, while also analyzing the potential of already commercialized processes and products. - Covers carotenoids' properties in view of alternative sources (plant by-products, microalgae, etc.), recovery technologies and applications - Thoroughly explores mechanistic aspects, dietary intake and recommendations surrounding the health-promoting effects of carotenoids - Discusses the effect of processing and storage conditions in carotenoid levels and bioavailability - Presents applications and case studies in the food industry
Download or read book Food Properties and Computer Aided Engineering of Food Processing Systems written by R.P. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food properties, whether they concern the physical, thermodynamic, chemical, nutritional or sensory characteristics of foods, play an important role in food processing. In our quest to gain a mechanistic understanding of changes occurring during food processing, the knowledge of food properties is essential. Quantitative information on the food properties is necessary in the design and operation of food processing equipment. Foods, because of their biological nature and variability, vary in the magnitude of their properties. The variation in properties offer a challenge both in their measurement and use in the food processing applications. Often a high level of precision in measurement of properties is not possible as the measurement method may itself cause changes to the product, resulting in a variation in the obtained values. Recognizing the difficulties in measurement of food properties, and the lack of completeness of such information, several research programs have been in existence during the last two decades. In Europe, a multinational effort has been underway since 1978. The first project supported by COST (European Cooperation in the Field of Scientific and Technical Research), was titled COST 90 "The Effect of Processing on the Physical Properties of Foodstuffs". This and another project COST 90bis have considerably added to our knowledge of measurement methods and data on a number of physical properties. Two publications that summarize the work conducted under 1 2 these projects are Physical Properties of Foods and Physical Properties of Foods .
Download or read book Poly lactic acid Science and Technology written by Alfonso Jiménez and published by Royal Society of Chemistry. This book was released on 2015 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the synthesis, characterisation, properties and applications of poly(lactic acid) science and technology covering scientific, ecological, social and economic issues.
Download or read book Handbook Of Green Materials Processing Technologies Properties And Applications In 4 Volumes written by Kristiina Oksman and published by World Scientific. This book was released on 2014-04-11 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green materials and green nanotechnology have gained widespread interest over the last 15 years; first in academia, then in related industries in the last few years.The Handbook of Green Materials serves as reference literature for undergraduates and graduates studying materials science and engineering, composite materials, chemical engineering, bioengineering and materials physics; and for researchers, professional engineers and consultants from polymer or forest industries who encounter biobased nanomaterials, bionanocomposites, self- and direct-assembled nanostructures and green composite materials in their lines of work.This four-volume set contains material ranging from basic, background information on the fields discussed, to reports on the latest research and industrial activities, and finally the works by contributing authors who are prominent experts of the subjects they address in this set.The four volumes comprise of:The first volume explains the structure of cellulose; different sources of raw material; the isolation/separation processes of nanomaterials from different material sources; and properties and characteristics of cellulose nanofibers and nanocrystals (starch nanomaterials). Information on the different characterization methods and the most important properties of biobased nanomaterials are also covered. The industrial point of view regarding both the processability and access of these nanomaterials, as well as large scale manufacturing and their industrial application is discussed — particularly in relation to the case of the paper industry.The second volume expounds on different bionanocomposites based on cellulose nanofibers or nanocrystals and their preparation/manufacturing processes. It also provides information on different characterization methods and the most important properties of bionanocomposites, as well as techniques of modeling the mechanical properties of nanocomposites. This volume presents the industrial point of view regarding large scale manufacturing and their applications from the perspective of their medical uses in printed electronics and in adhesives.The third volume deals with the ability of bionanomaterials to self-assemble in either liquids or forming organized solid materials. The chemistry of cellulose nanomaterials and chemical modifications as well as different assembling techniques and used characterization methods, and the most important properties which can be achieved by self-assembly, are described. The chapters, for example, discuss subjects such as ultra-light biobased aerogels based on cellulose and chitin, thin films suitable as barrier layers, self-sensing nanomaterials, and membranes for water purification.The fourth volume reviews green composite materials — including green raw materials — such as biobased carbon fibers, regenerated cellulose fibers and thermoplastic and thermoset polymers (e.g. PLA, bio-based polyolefines, polysaccharide polymers, natural rubber, bio-based polyurethane, lignin polymer, and furfurylalchohol). The most important composite processing technologies are described, including: prepregs of green composites, compounding, liquid composite molding, foaming, and compression molding. Industrial applications, especially for green transportation and the electronics industry, are also described.This four-volume set is a must-have for anyone keen to acquire knowledge on novel bionanomaterials — including structure-property correlations, isolation and purification processes of nanofibers and nanocrystals, their important characteristics, processing technologies, industrial up-scaling and suitable industry applications. The handbook is a useful reference not only for teaching activities but also for researchers who are working in this field.
Download or read book Innovative Food Processing Technologies written by and published by Elsevier. This book was released on 2020-08-18 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food process engineering, a branch of both food science and chemical engineering, has evolved over the years since its inception and still is a rapidly changing discipline. While traditionally the main objective of food process engineering was preservation and stabilization, the focus today has shifted to enhance health aspects, flavour and taste, nutrition, sustainable production, food security and also to ensure more diversity for the increasing demand of consumers. The food industry is becoming increasingly competitive and dynamic, and strives to develop high quality, freshly prepared food products. To achieve this objective, food manufacturers are today presented with a growing array of new technologies that have the potential to improve, or replace, conventional processing technologies, to deliver higher quality and better consumer targeted food products, which meet many, if not all, of the demands of the modern consumer. These new, or innovative, technologies are in various stages of development, including some still at the R&D stage, and others that have been commercialised as alternatives to conventional processing technologies. Food process engineering comprises a series of unit operations traditionally applied in the food industry. One major component of these operations relates to the application of heat, directly or indirectly, to provide foods free from pathogenic microorganisms, but also to enhance or intensify other processes, such as extraction, separation or modification of components. The last three decades have also witnessed the advent and adaptation of several operations, processes, and techniques aimed at producing high quality foods, with minimum alteration of sensory and nutritive properties. Some of these innovative technologies have significantly reduced the thermal component in food processing, offering alternative nonthermal methods. Food Processing Technologies: A Comprehensive Review, Three Volume Set covers the latest advances in innovative and nonthermal processing, such as high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation and new hurdle technology. Each section will have an introductory article covering the basic principles and applications of each technology, and in-depth articles covering the currently available equipment (and/or the current state of development), food quality and safety, application to various sectors, food laws and regulations, consumer acceptance, advancements and future scope. It will also contain case studies and examples to illustrate state-of-the-art applications. Each section will serve as an excellent reference to food industry professionals involved in the processing of a wide range of food categories, e.g., meat, seafood, beverage, dairy, eggs, fruits and vegetable products, spices, herbs among others.
Download or read book Innovative Food Processing Technologies written by Kai Knoerzer, PhD and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the IFT (Institute of Food Technologists) series, this book discusses multiphysics modeling and its application in the development, optimization, and scale-up of emerging food processing technologies. The book covers recent research outcomes to demonstrate process efficiency and the impact on scalability, safety, and quality, and technologies including High Pressure Processing, High Pressure Thermal Sterilization, Radiofrequency, Ultrasound, Ultraviolet, and Pulsed Electric Fields Processing. Ideal for food and process engineers, food technologists, equipment designers, microbiologists, and research and development personnel, this book covers the importance and the methods for applying multiphysics modeling for the design, development, and application of these technologies.
Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.
Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics
Download or read book Processing Technology for Bio Based Polymers written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2021-06-25 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing Technology for Bio-Based Polymers: Advanced Strategies and Practical Aspects brings together the latest advances and novel technologies surrounding the synthesis and manufacture of biopolymers, ranging from bio-based polymers to synthetic polymers from bio-derived monomers. Sections examine bio-based polymer chemistry, discuss polymerization process and emerging design technologies, cover manufacturing and processing approaches, explain cutting-edge approaches and innovative applications, and focus on biomedicals and other key application areas. Final chapters provide detailed discussion and an analysis of economic and environmental concerns, practical considerations, challenges, opportunities and future trends. This is a valuable resource for researchers, scientists and advanced students in polymer science, bio-based materials, nanomaterials, plastics engineering, biomaterials, chemistry, biotechnology, and materials science and engineering, as well as R&D professionals, engineers and industrialists interested in the development of biopolymers for advanced products and applications. - Focuses on the processing of bio-based polymers, covering both traditional methods and innovative new approaches - Offers novel opportunities and ideas for developing or improving technologies for biopolymer research, preparation and application - Examines other key considerations, including reliability and end product, economic concerns, and environmental and lifecycle aspects
Download or read book Textile Processing and Properties written by T.L. Vigo and published by Elsevier. This book was released on 2013-10-22 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The type and amount of textile products have greatly proliferated over the last decade. Concomitant textile processing to improve the properties and ultimate performance has also undergone dramatic changes. Ready availability of instrumentation, computers, lasers and integration of these advances with similar progress in polymer/material science have led to the need for a unified discussion on these topics. The current book concisely discusses all aspects of textile processing, modification and performance for four major topics: preparation (by fiber type), dyeing and printing (dye type, theory and synthesis; dye classification by structure and application), improving functional and aesthetic textile properties (physical, chemical and physicochemical processes and concepts), and performance (chemical analysis, instrumental methods; physical, chemical, biological, multiple influences and standard tests). A detailed and logical progression from the initial purification of textiles to their performance and care is described. The book will be useful as a text for textile/polymer courses at undergraduate and graduate levels and as a comprehensive source of information for textile scientists, engineers, manufacturers, retailers and others with an interest in textile products.
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
