Download or read book Properties And Applications Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2009-08-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the second of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Complex Metallic Alloys written by Jean-Marie Dubois and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamental research as well as real-world applications, this first book on CMAs at an introductory level treats everything from atomistic details to surface processing. Comprehensive, self-contained chapters provide readers with the latest knowledge on the most salient features of the topic, selected in terms of their relevance to potential technological applications. Edited by one of the most distinguished authorities on quasicrystals and this most important of their subclasses, the contributions elucidate aspects of CMAs from a particular viewpoint: physical and chemical characteristics in the sub-nanometer regime, mesoscale phenomena, preparation and processing of thin films, and large-scale engineering properties. The whole is rounded off by a look at the commercial potential of CMA-based applications. For PhD students and lecturers alike.
Download or read book Surface Properties and Engineering of Complex Intermetallics written by Esther Belin-Ferré and published by World Scientific. This book was released on 2010 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the third in a series of four publications issued annually as a deliverable of the research school established within the European Network of Excellence CMA (for Complex Metallic Alloys), is written by reputed experts in the fields of surface physics and chemistry, metallurgy and process engineering. It combines expertise found inside as well as outside the network. The CMA network focuses on the huge group of largely unknown multinary alloys and compounds formed with crystal structures based on giant unit cells containing clusters, with many tens or up to thousands of atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually excluded in conventional materials: metallic electric conductivity combined with low thermal conductivity, combination of good light absorption with high-temperature stability, combination of high metallic hardness with reduced wetting by liquids, electrical and thermal resistance tuneable by composition variation, excellent resistance to corrosion, reduced cold-welding and adhesion, enhanced hydrogen storage capacity and light absorption. This book series will concentrate on the: development of fundamental knowledge with the aim of understanding materials phenomena, technologies associated with the production, transformation and processing of knowledge-based multifunctional materials, surface engineering, support for new materials development and new knowledge-based higher performance materials for macro-scale applications.
Download or read book Mechanical Properties of Complex Intermetallics written by Esther Belin-Ferr and published by World Scientific. This book was released on 2011 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the last one in a series of 4 books issued yearly as a deliverable of the research school established within the European Network of Excellence CMA (for Complex Metallic Alloys). It is written by reputed experts in the fields of metal physics, surface physics and chemistry, metallurgy and process engineering, combining expertise found inside as well as outside the network. The CMA network focuses on the huge group of largely unknown multinary alloys and compounds formed with crystal structures based on giant unit cells containing clusters, with many tens up to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties, which are mutually excluded in conventional materials: metallic electric conductivity combined with low thermal conductivity, combination of good light absorption with high-temperature stability, combination of high metallic hardness with reduced wetting by liquids, electrical and thermal resistance tuneable by composition variation, excellent resistance to corrosion, reduced cold-welding and adhesion, enhanced hydrogen storage capacity and light absorption, etc. The series of books will concentrate on: development of fundamental knowledge with the aim of understanding materials phenomena, technologies associated with the production, transformation and processing of knowledge-based multifunctional materials, surface engineering, support for new materials development and new knowledge-based higher performance materials for macro-scale applications.
Download or read book Intermetallics written by Walter Steurer and published by Oxford University Press. This book was released on 2016 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fascinating world of intermetallics is largely unexplored. There are many exciting physical properties and important technological applications of intermetallics, from magnetism to superconductivity. The main focus of this book is on the statistics, topology and geometry of crystal structures and structure types of intermetallic phases. The underlying physics, in particular chemical bonding, is discussed whenever it helps understand the stability of structures and the origin of their physical properties. The authors' approach, based on the statistical analysis of more than twenty thousand intermetallic compounds in the data base Pearson's Crystal Data, uncovers important structural relationships and illustrates the relative simplicity of most of the general structural building principles. It also shows that a large variety of actual structures can be related to a rather small number of aristotypes. The text aims to be readable and beneficial in one way or another to everyone interested in intermetallic phases, from graduate students to experts in solid state chemistry and physics, and materials science. For that purpose it avoids the use of enigmatic abstract terminology for the classification of structures. Instead, it focuses on the statistical analysis of crystal structures and structure types in order to draw together a larger overview of intermetallics, and indicate the gaps in it - areas still to be explored, and potential sources of worthwhile research. The text should be read as a reference guide to the incredibly rich world of intermetallic phases.
Download or read book Surface Properties of Complex Intermetallics at the Nanoscale written by Kanika Anand and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metallic alloys (CMAs) are intermetallic compounds possessing a large unit cell containing several tens to hundreds of atoms. Their structure can be described alternatively by the packing of highly symmetric atomic clusters. Clathrate (or cage) compounds are a new class of CMAs having a crystal structure described by a complex arrangement of covalently-bonded cages. The Ba8Au5.25Ge40.75 type-I clathrate is one such cage compound, whose bulk properties have been (and still are) extensively explored for thermoelectric applications. In fact, it is possible to tune the compound electronic structure by a fine control of its bulk composition. Regarding the properties of the Ba8Au5.25Ge40.75 surface, information remains scarce if not inexistent. However, it is known that the surfaces of CMAs often exhibit interesting surface properties. To this end, we have studied two low-index surfaces: BaAuGe(100) and BaAuGe(110) by a combination of experimental (XPS; LEED; STM) and computational (DFT) methods. Experimental results show no evidence for surface segregation and LEED patterns are consistent with (1x1) bulk terminations with no surface reconstruction. The interplay between the 3D nano-caged structure and 2D surfaces is investigated. We demonstrate that the surface structures of the two surfaces considered preserve the bulk structure cages in addition to an ordered arrangement of surface Ba atoms. The two surfaces are formed by a breakage of highly directional covalent bonds present within the framework, hence leading to destabilizing dangling bonds. Ab initio calculations show that the surface structure is stabilized through electron charge transfer from protruding Ba to surface Ge and Au atoms, saturating the dangling bonds. This charge-balance mechanism lifts the possible surface reconstruction envisaged. We reveal how the surface nanostructuration is surface orientation dependent. The results indicate that the surface electronic structure of BaAuGe(110) is impacted by the Au surface concentration. The surface models for BaAuGe(100) and BaAuGe(110) present a metallic character and low work function values, useful for further applications. Such structurally complex surfaces may also be used as templates for novel nanoscale architectures. Further in this work, we also applied the state-of-the-art surface science techniques to investigate the wetting properties of Al-based CMAs. In these experiments, chemically inert Pb element was used as a metal probe. Systematic analysis is done to find the correlation between the wetting properties and the electronic structure properties of these CMAs. Interfacial energy calculations have been performed to model the Pb/CMA interface based on few approaches reported in literature. We have tested these approaches on a moiré patterned Pb(111)/Al(111) interface. This interface is found to be controlled by geometric factors. Hence, an acquired understanding was applied to Pb deposited on Al13Co4(100) (Al-rich side) interface.
Download or read book Basics Of Thermodynamics And Phase Transitions In Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2008-05-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the first of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Intermetallic Matrix Composites written by Rahul Mitra and published by Elsevier. This book was released on 2017-05-25 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic Matrix Composites: Properties and Applications is a comprehensive guide that studies the types and properties of intermetallic matrix composites, including their processing techniques, characterization and the various testing methods associated with these composites. In addition, it presents modeling techniques, their strengthening mechanisms and the important area of failure and repair. Advanced /complex IMCs are then explained, such as Self-healing IMCs and laminated intermetallic composites. The book concludes by delving into the industries that use these materials, including the automotive industry. - Reviews the latest research in intermetallic matrix composites - Contains a focus on properties and applications - Includes contributions from leading experts in the field
Download or read book Intermetallics written by Rainer Pöttgen and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-22 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expanded edition focuses still more on Synthesis discussing necessary requirements for sample preparation and presents the broad range from structural analysis to property investigations. Additional examples of chemical and physical properties are highlighted for metallic, binary and multinary intermetallic compounds. The work contains an up-dated literature overview in all sub-chapters and a detailed formulae index.
Download or read book Basics of Thermodynamics and Phase Transitions in Complex Intermetallics written by Esther Belin-Ferr and published by World Scientific. This book was released on 2008 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the first of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Intermetallics written by Gerhard Sauthoff and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the highly acclaimed series Materials Science and Technology, this book covers the properties as well as the present and emerging applications of intermetallics. Mechanical characteristics, microstructure as well as the environmental influence on intermetallics are treated in depth. In addition, the prospects and risks inherent in materials development as well as typical applications of intermetallics are critically assessed. It is the author's aim to provide the basis for understanding the physical mechanisms, which influence the properties of the materials and ultimately their areas of application. Materials covered include: Titanium Aluminides and Related Phases * Nickel Aluminides and Related Phases * Iron Aluminides and Related Phases * Cu-Base Phases * A15 Phases * Laves Phases * Rare-Earth Compound * Beryllides * Silicides Intermetallics is a valuable source of information for researchers and graduate students working in materials science, metallurgy, condensed-matter physics, and engineering.
Download or read book Intermetallic Compounds written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic compounds are usually brittle with high melting points. Their properties are often found among ceramic and metallic materials. In most cases, their hot corrosion resistance and simultaneously hardness are important. One of the main applications of intermetallic compounds is for superalloy turbine blades in which they show appropriate high-temperature-related properties. This book collects new developments about intermetallic compounds and their recent usages.
Download or read book Surface Properties and Engineering of Complex Intermetallics written by Esther Belin-Ferr and published by World Scientific. This book was released on 2010 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the development of fundamental knowledge with the aim of understanding materials phenomena, transformation and processing of knowledge-based multifunctional materials, surface engineering, and support for materials development and knowledge-based higher performance materials for macro-scale applications.
Download or read book Complex intermetallics structures and properties written by Julia Dshemuchadse and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy and processing of Intermetallic Compounds written by N.S. Stoloff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The attractive physical and mechanical properties of ordered intermetallic alloys have been recognized since early in this century. However, periodic attempts to develop intermetallics for structural applications were unsuc cessful, due in major part to the twin handicaps of inadequate low-temper ature ductility or toughness, together with poor elevated-temperature creep strength. The discovery, in 1979, by Aoki and Izumi in Japan that small additions of boron caused a dramatic improvement in the ductility of Ni3Al was a major factor in launching a new wave of fundamental and applied research on intermetallics. Another important factor was the issuance in 1984 of a National Materials Advisory Board reported entitled "Structural Uses for Ductile Ordered Alloys," which identified numerous potential defense-related applications and proposed the launching of a coordinated development program to gather engineering property and processing data. A substantial research effort on titanium aluminides was already underway at the Air Force Materials Laboratory at Wright Patterson Air Force Base in Ohio and, with Air Force support, at several industrial and university laboratories. Smaller programs also were under way at Oak Ridge National Laboratory, under Department of Energy sponsorship. These research efforts were soon augmented in the United States by funding from Department of Defense agencies such as Office of Naval Research and Air Force Office of Scientific Research, and by the National Science Foundation.
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Alloys and Intermetallic Compounds written by Cristina Artini and published by CRC Press. This book was released on 2017-07-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of alloys. The book emphasizes the correlation between modeling and technological developments while discussing topics such as wettability of Ultra High Temperature Ceramics by metals, active brazing of diamonds to metals in cutting tools, surface issues in medicine, novel Fe-based superconductors, metallic glasses, high entropy alloys, and thermoelectric materials.
