Download or read book Projectile Transverse Motion and Stability in Electromagnetic Induction Launchers written by and published by . This book was released on 1993 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transverse motion of a projectile in an electromagnetic induction launcher is considered. The equations of motion for translation and rotation are derived assuming a rigid projectile and a flyway restoring force per unit length that is proportional to the local displacement. Linearized transverse forces and torques due to energized coils are derived for displaced or tilted armature elements based on a first order perturbation method. The resulting equations of motion for a rigid projectile composed of multiple elements in a multi-coil launcher are analyzed as a coupled oscillator system of equations and a simple linear stability condition is derived. The equations of motion are incorporated into the 2-D Slingshot circuit code and numerical solutions for the transverse motion are obtained. For a launcher with a 10 cm bore radius with a 40 cm long solid armature, we find that stability is achieved with a restoring force (per unit length) constant of k (almost equal to) 1 x 108 N/m2. For k = 1.5 x 108 N/m2 and sample coil misalignment modeled as a sine wave of 1 mm amplitude at wavelengths of one or two meters, the projectile displacement grows to a maximum of 4 mm. This growth is due to resonance between the natural frequency of the projectile transverse motion and the coil displacement wavelength. This resonance does not persist because of the changing axial velocity. Random coil displacement is also found to cause roughly the same projectile displacement. For the maximum displacement a rough estimate of the transverse pressure is 50 bars. Results for a wound armature with uniform current density throughout show very similar displacements.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1995 with total page 1320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Field Artillery Manual Cannon Gunnery written by Department of the Army and published by . This book was released on 2017-08-19 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-09.81, "Field Artillery Manual Cannon Gunnery," sets forth the doctrine pertaining to the employment of artillery fires. It explains all aspects of the manual cannon gunnery problem and presents a practical application of the science of ballistics. It includes step-by-step instructions for manually solving the gunnery problem which can be applied within the framework of decisive action or unified land operations. It is applicable to any Army personnel at the battalion or battery responsible to delivered field artillery fires. The principal audience for ATP 3-09.42 is all members of the Profession of Arms. This includes field artillery Soldiers and combined arms chain of command field and company grade officers, middle-grade and senior noncommissioned officers (NCO), and battalion and squadron command groups and staffs. This manual also provides guidance for division and corps leaders and staffs in training for and employment of the BCT in decisive action. This publication may also be used by other Army organizations to assist in their planning for support of battalions. This manual builds on the collective knowledge and experience gained through recent operations, numerous exercises, and the deliberate process of informed reasoning. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1996 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Fields written by Heinz E. Knoepfel and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique resource for physicists and engineers working with magnetic fields An understanding of magnetic phenomena is essential for anyone working on the practical application of electromagnetic theory. Magnetic Fields: A Comprehensive Theoretical Treatise for Practical Use provides physicists and engineers with a thorough treatment of the magnetic aspects of classical electromagnetic theory, focusing on key issues and problems arising in the generation and application of magnetic fields. From magnetic potentials and diffusion phenomena to magnetohydrodynamics and properties of matter-topics are carefully selected for their relevance to the theoretical framework as well as current technologies. Outstanding in its organization, clarity, and scope, Magnetic Fields: * Examines a wide range of practical problems, from magnetomechanical devices to magnetic acceleration mechanisms * Opens each chapter with reference to pertinent engineering examples * Provides sufficient detail enabling readers to follow the derivation of the results * Discusses solution methods and their application to different problems * Includes more than 300 graphs, 40 tables, 2,000 numbered formulas, and extensive references to the professional literature * Reviews the essential mathematics in the appendices
Download or read book Problems and Solutions on Mechanics written by Yung-kuo Lim and published by World Scientific. This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newtonian mechanics : dynamics of a point mass (1001-1108) - Dynamics of a system of point masses (1109-1144) - Dynamics of rigid bodies (1145-1223) - Dynamics of deformable bodies (1224-1272) - Analytical mechanics : Lagrange's equations (2001-2027) - Small oscillations (2028-2067) - Hamilton's canonical equations (2068-2084) - Special relativity (3001-3054).
Download or read book Spacecraft Attitude Determination and Control written by J.R. Wertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roger D. Werking Head, Attitude Determination and Control Section National Aeronautics and Space Administration/ Goddard Space Flight Center Extensiye work has been done for many years in the areas of attitude determination, attitude prediction, and attitude control. During this time, it has been difficult to obtain reference material that provided a comprehensive overview of attitude support activities. This lack of reference material has made it difficult for those not intimately involved in attitude functions to become acquainted with the ideas and activities which are essential to understanding the various aspects of spacecraft attitude support. As a result, I felt the need for a document which could be used by a variety of persons to obtain an understanding of the work which has been done in support of spacecraft attitude objectives. It is believed that this book, prepared by the Computer Sciences Corporation under the able direction of Dr. James Wertz, provides this type of reference. This book can serve as a reference for individuals involved in mission planning, attitude determination, and attitude dynamics; an introductory textbook for stu dents and professionals starting in this field; an information source for experimen ters or others involved in spacecraft-related work who need information on spacecraft orientation and how it is determined, but who have neither the time nor the resources to pursue the varied literature on this subject; and a tool for encouraging those who could expand this discipline to do so, because much remains to be done to satisfy future needs.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Space Dynamics written by William Tyrrell Thomson and published by Courier Corporation. This book was released on 2012-09-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, classic introduction to space-flight engineering for advanced undergraduate and graduate students provides basic tools for quantitative analysis of the motions of satellites and other vehicles in space.
Download or read book Classical Mechanics written by T. W. B. Kibble and published by Imperial College Press. This book was released on 2004 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fifth edition of a well-established textbook. It is intended to provide a thorough coverage of the fundamental principles and techniques of classical mechanics, an old subject that is at the base of all of physics, but in which there has also in recent years been rapid development. The book is aimed at undergraduate students of physics and applied mathematics. It emphasizes the basic principles, and aims to progress rapidly to the point of being able to handle physically and mathematically interesting problems, without getting bogged down in excessive formalism. Lagrangian methods are introduced at a relatively early stage, to get students to appreciate their use in simple contexts. Later chapters use Lagrangian and Hamiltonian methods extensively, but in a way that aims to be accessible to undergraduates, while including modern developments at the appropriate level of detail. The subject has been developed considerably recently while retaining a truly central role for all students of physics and applied mathematics.This edition retains all the main features of the fourth edition, including the two chapters on geometry of dynamical systems and on order and chaos, and the new appendices on conics and on dynamical systems near a critical point. The material has been somewhat expanded, in particular to contrast continuous and discrete behaviours. A further appendix has been added on routes to chaos (period-doubling) and related discrete maps. The new edition has also been revised to give more emphasis to specific examples worked out in detail.Classical Mechanics is written for undergraduate students of physics or applied mathematics. It assumes some basic prior knowledge of the fundamental concepts and reasonable familiarity with elementary differential and integral calculus.
Download or read book Senior Physics written by Pb Walding and published by . This book was released on 1997 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text for the new Queensland Senior Physics syllabus. Provides examples, questions, investigations and discussion topics. Designed to be gender balanced, with an emphasis on library and internet research. Includes answers, a glossary and an index. An associated internet web page gives on-line worked solutions to questions and additional resource material. The authors are experienced physics teachers and members of the Physics Syllabus Sub-Committee of the Queensland BSSSS.
Download or read book An Introduction to Mechanics written by Daniel Kleppner and published by Cambridge University Press. This book was released on 2010-05-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic textbook on the principles of Newtonian mechanics for undergraduate students, accompanied by numerous worked examples and problems.
