Download or read book A Comprehensive Guide to Project Management Schedule and Cost Control written by Randal Wilson and published by Pearson Education. This book was released on 2014 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most complete guide to all the principles and techniques you need to successfully schedule projects and control their costs. Not a broad project management guide, it offers focused coverage of every essential aspect of scheduling and cost control -- including key issues ignored by typical PM guides. Expert project manager and long-time instructor Randal Wilson makes scheduling and cost control intuitive through the extensive use of graphs, charts, and case studies, and provides all the formulas and worked examples you need to succeed. Writing for both newcomers and working project managers, Wilson covers all this, and more: Project structures, including differences between projects and programs, and how those differences affect costing and scheduling Initiation: how projects start, how to develop project charters and stakeholder registers, and how to manage stakeholders Planning, in depth: what costs must be addressed, and what schedule constraints must be considered Project schedule analysis: activity definition, WBS, and work packages; activity sequencing and diagramming; proven methodologies for estimating resources and activity durations; and schedule development Project cost analysis: gathering and estimating all project costs, including labor, materials, vendor bids, subcontractors, contracts, equipment, facilities, and direct/indirect costs. Budgeting via top-down, bottom-up, and activity-based methods Project monitoring and control: earned value, tracking Gantt, S-Curves, performance reviews, milestone analysis, change control systems, estimate at completion, forecasting, and much more.

Download or read book Construction Project Scheduling and Control written by Saleh A. Mubarak and published by John Wiley & Sons. This book was released on 2010-10-26 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easy-to-follow guide to the theory and practice of project scheduling and control No matter how large or small the construction project, an efficient, well-thought-out schedule is crucial to achieving success. The schedule manages all aspects of a job, such as adjusting staff requirements at various stages, overseeing materials deliveries and equipment needs, organizing inspections, and estimating time needs for curing and settling—all of which requires a deep understanding on the part of the scheduler. Written by a career construction professional, Construction Project Scheduling and Control, Second Edition has been fully revised with up-to-date coverage detailing all the steps needed to devise a technologically advanced schedule geared toward streamlining the construction process. Solved and unsolved exercises reinforce learning, while an overview of industry standard computer software sets the tone for further study. Some of the features in this Second Edition include: Focus on precedence networks as a viable solution to scheduling, the main part of project control The concepts of Dynamic Minimal Lag, a new CPM technique developed by the author A new chapter on schedule risk management By combining basic fundamentals with advanced techniques alongside the robust analysis of theory to enhance real-world applications, Construction Project Scheduling and Control is an ideal companion for students and professionals looking to formulate a schedule for a time-crunched industry in need of better ways to oversee projects.

Download or read book Integrated Cost and Schedule Control in Project Management written by Ursula Kuehn and published by Berrett-Koehler Publishers. This book was released on 2010-10-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Practical, Precise, and Proven Approach to Integrated Cost and Schedule Control! This trusted project management resource, now in its second edition, includes expanded coverage of how integrated cost and schedule control works within the federal government. With the renewed emphasis on transparency in government, the processes detailed in this book are particularly relevant. Building on the solid foundation of the first edition, this updated second edition includes new material on: • Project planning in the federal government • Integrated baseline reviews • Federal requirements for an ANSI/EIA-748 compliant earned value management system • Federal requirements for performance reports Integrated Cost and Schedule Control in Project Management, Second Edition, continues to offer a practical approach that is accessible to project managers at all levels. The step-by-step presentation, numerous case studies, and instructive examples give practitioners relevant material they can put to use immediately.

Download or read book Project Control written by Wayne J. Del Pico and published by John Wiley & Sons. This book was released on 2013-08-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key to successful project control is the fusing of cost to schedule whereby the management of one helps to manage the other. Project Control: Integrating Cost and Schedule in Construction explores the reasons behind and the methodologies for proper planning, monitoring, and controlling both project costs and schedule. Filling a current void the topic of project control applied to the construction industry, it is essential reading for students and professionals alike.

Download or read book Project Scheduling and Management for Construction written by David R. Pierce, Jr. and published by John Wiley & Sons. This book was released on 2013-09-30 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1988 by RS Means, the new edition of Project Scheduling and Management for Construction has been substantially revised for students enrolled in construction management and civil engineering programs. While retaining its emphasis on developing practical, professional-level scheduling skills, the new edition is a relatable, real-world case study that can be used over the course of a semester. The book also includes classroom elements like exercises, quizzes, skill-building exercises, as well as an instructor's manual including two additional new cases.

Download or read book Mastering Project Time Management Cost Control and Quality Management written by Randal Wilson and published by FT Press. This book was released on 2015-04-23 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering Project Time Management, Cost Control, and Quality Management gives managers powerful insights and tools for addressing the "Triple Constraints" that define virtually every project: time, cost, and quality. This book is part of a new series of seven cutting-edge project management guides for both working practitioners and students. Like all books in this series, it offers deep practical insight into the successful design, management, and control of complex modern projects. Using real case studies and proven applications, expert authors show how multiple functions and disciplines can and must be integrated to achieve a successful outcome. Individually, these books focus on realistic, actionable solutions, not theory. Together, they provide comprehensive guidance for working project managers at all levels, including highly-complex enterprise environments. These books also provide indispensable knowledge for anyone pursuing PMI/PMBOK or PRINCE2 certification, or other accreditation in the field.

Download or read book Project Scheduling and Cost Control written by James Taylor and published by J. Ross Publishing. This book was released on 2008 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 80 percent of all projects start with underestimated schedules and costs, and are doomed to exceed projections. This concise book demonstrates how to establish realistic estimates, how to control a projects schedule and costs, and how to develop the projects plan and processes for successful project completion.

Download or read book Project Management Planning and Control written by Albert Lester and published by Butterworth-Heinemann. This book was released on 2007 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition provides a comprehensive resource for project managers. It describes the latest project management systems that use critical path methods.

Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".

Download or read book Computerized Management of Multiple Small Projects written by Richard E. Westney and published by CRC Press. This book was released on 1992-03-17 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This well-organized reference presents complete and explicit instructions on exactly what to do to manage multiple small projects -- using limited resources -- in any industry. The hands-on methods -- derived from proven successes in every type of business -- specifically address the needs of the nonspecialist project manager, and are highly effective for professionals who coordinate multiple projects of any kind. "

Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Leuven Gent Management School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves.

Download or read book An Introduction to Project Modeling and Planning written by Gündüz Ulusoy and published by Springer Nature. This book was released on 2021-04-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches the basic concepts and methods of project management but also explains how to convert them to useful results in practice. Project management offers a promising working area for theoretical and practical applications, and developing software and decision support systems (DSS). This book specifically focuses on project planning and control, with an emphasis on mathematical modeling. Models and algorithms establish a good starting point for students to study the relevant literature and support pursuing academic work in related fields. The book provides an introduction to theoretical concepts, and it also provides detailed explanations, application examples, and case studies that deal with real-life problems. The chapter topics include questions that underlie critical thinking, interpretation, analytics, and making comparisons. Learning outcomes are defined and the content of the book is structured following these goals. Chapter 1 begins by introducing the basic concepts, methods, and processes of project management. This Chapter constitutes the base for defining and modeling project management problems. Chapter 2 explores the fundamentals of organizing and managing projects from an organization’s perspective. Issues related to project team formation, the role of project managers, and organization types are discussed. Chapter 3 is devoted to project planning and network modeling of projects, covering fundamental concepts such as project scope, Work Breakdown Structure (WBS), Organizational Breakdown Structure (OBS), Cost Breakdown Structure (CBS), project network modeling, activity duration, and cost estimating, activity-based costing (ABC), data and knowledge management. Chapter 4 introduces deterministic scheduling models, which can be used in constructing the time schedules. Models employing time-based and finance-based objectives are introduced. The CPM is covered. The unconstrained version of maximizing Net Present Value (NPV) is also treated here together with the case of time-dependent cash flows. Chapter 5 focuses on the time/cost trade-off problem, explaining how to reduce the duration of some of the activities and therefore reduce the project duration at the expense of additional costs. This topic is addressed for both continuous and discrete cases. Chapter 6 discusses models and methods of scheduling under uncertain activity durations. PERT is introduced for minimizing the expected project duration and extended to the PERT-Costing method for minimizing the expected project cost. Simulation is presented as another approach for dealing with the uncertainty in activity durations and costs. To demonstrate the use of the PERT, a case study on constructing an earthquake-resistant residential house is presented. Classifications of resource and schedule types are given in Chapter 7, and exact and heuristic solution procedures for the single- and multi-mode resource constrained project scheduling problem (RCPSP) are presented. The objective of maximizing NPV under resource constraints is addressed, and the capital-constrained project scheduling model is introduced. In Chapter 8, resource leveling, and further resource management problems are introduced. Total adjustment cost and resource availability cost problems are introduced. Various exact models are investigated. A heuristic solution procedure for the resource leveling problem is presented in detail. Also, resource portfolio management policies and the resource portfolio management problem are discussed. A case study on resource leveling dealing with the annual audit project of a major corporation is presented. Project contract types and payment schedules constitute the topics of Chapter 9. Contracts are legal documents reflecting the results of some form of client-contractor negotiations and sometimes of a bidding process, which deserve closer attention. Identification and allocation of risk in contracts, project control issues, disputes, and resolution management are further topics covered in this Chapter. A bidding model is presented to investigate client-contractor negotiations and the bidding process from different aspects. Chapter 10 focuses on processes and methods for project monitoring and control. Earned Value Management is studied to measure the project performance throughout the life of a project and to estimate the expected project time and cost based on the current status of the project. How to incorporate inflation into the analysis is presented. In Chapter 11, qualitative and quantitative techniques including decision trees, simulation, and software applications are introduced. Risk phases are defined and building a risk register is addressed. An example risk breakdown structure is presented. The design of risk management processes is introduced, and risk response planning strategies are discussed. At the end of the Chapter, the quantitative risk analysis is demonstrated at the hand of a team discussion case study. Chapter 12 covers several models and approaches dealing with various stochastic aspects of the decision environment. Stochastic models, generation of robust schedules, use of reactive and fuzzy approaches are presented. Sensitivity and scenario analysis are introduced. Also, simulation analysis, which is widely used to analyze the impacts of uncertainty on project goals, is presented. Chapter 13 addresses repetitive projects that involve the production or construction of similar units in batches such as railway cars or residential houses. Particularly in the construction industry repetitive projects represent a large portion of the work accomplished in this sector of the economy. A case study on the 50 km section of a motorway project is used for demonstrating the handling of repetitive project management. How best to select one or more of a set of candidate projects to maintain a project portfolio is an important problem for project-based organizations with limited resources. The project selection problem is inherently a multi-objective problem and is treated as such in Chapter 14. Several models and solution techniques are introduced. A multi-objective, multi-period project selection and scheduling model is presented. A case study that addresses a project portfolio selection and scheduling problem for the construction of a set of dams in a region is presented. Finally, Chapter 15 discusses three promising research areas in project management in detail: (i) Sustainability and Project Management, (ii) Project Management in the Era of Big Data, and (iii) the Fourth Industrial Revolution and the New Age Project Management. We elaborate on the importance of sustainability in project management practices, discuss how developments in data analytics might impact project life cycle management, and speculate how the infinite possibilities of the Fourth Industrial Revolution and the new technologies will transform project management practices.

Download or read book Project Planning Scheduling and Control in Construction written by Calin M. Popescu and published by John Wiley & Sons. This book was released on 1995-03-20 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical Path Method (CPM) and Performance Evaluation and ReviewTechnique (PERT) are widely recognized as the most effectivemethods of keeping large, complex construction projects onschedule, under budget, and up to professional standards. But thesemethods remain underused because they are poorly understood and,due to a host of unfamiliar terms and applications, may seem morecomplicated than they really are. This encyclopedia brings together, in one comprehensive volume, allterms, definitions, and applications related to the time and costmanagement of construction projects. While many of these termsrefer to ancient and venerable building practices, others haveevolved quite recently and refer specifically to modernconstruction and management techniques. Sources include hundreds ofprofessional books, trade journals, and research publications, aswell as planning and scheduling software vendor literature. The detailed glossary of all applicable terms includes across-referenced listing of examples that describe real-worldapplications for each term supplied. An extensive bibliographycovers all applicable books, articles, and periodicals available onproject planning, scheduling, and control using CPM and relatedsubjects. This book is an important quick reference and desktop informationresource for construction planners, schedulers, and controllers, aswell as civil engineers and project managers. It is also theultimate research tool for educators, students, or anyone who seeksto improve their understanding of the management of modernconstruction projects.

Download or read book Practice Standard for Scheduling Third Edition written by Project Management Institute and published by Project Management Institute. This book was released on 2019-05-02 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practice Standard for Scheduling—Third Edition provides the latest thinking regarding good and accepted practices in the area of scheduling for a project. This updated practice standard expounds on the information contained in Section 6 on Project Schedule Management of the PMBOK® Guide. In this new edition, you will learn to identify the elements of a good schedule model, its purpose, use, and benefits. You will also discover what is required to produce and maintain a good schedule model. Also included: a definition of schedule model; uses and benefits of the schedule model; definitions of key terms and steps for scheduling; detailed descriptions of scheduling components; guidance on the principles and concepts of schedule model creation and use; descriptions of schedule model principles and concepts; uses and applications of adaptive project management approaches, such as agile, in scheduling; guidance and information on generally accepted good practices; and more.

Download or read book Project Management for Construction written by Chris Hendrickson and published by Chris Hendrickson. This book was released on 1989 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Planning written by and published by . This book was released on 2015 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Project Management written by Harold Kerzner and published by John Wiley & Sons. This book was released on 2009-04-03 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The landmark project management reference, now in a new edition Now in a Tenth Edition, this industry-leading project management "bible" aligns its streamlined approach to the latest release of the Project Management Institute's Project Management Body of Knowledge (PMI®'s PMBOK® Guide), the new mandatory source of training for the Project Management Professional (PMP®) Certificat-ion Exam. This outstanding edition gives students and professionals a profound understanding of project management with insights from one of the best-known and respected authorities on the subject. From the intricate framework of organizational behavior and structure that can determine project success to the planning, scheduling, and controlling processes vital to effective project management, the new edition thoroughly covers every key component of the subject. This Tenth Edition features: New sections on scope changes, exiting a project, collective belief, and managing virtual teams More than twenty-five case studies, including a new case on the Iridium Project covering all aspects of project management 400 discussion questions More than 125 multiple-choice questions (PMI, PMBOK, PMP, and Project Management Professional are registered marks of the Project Management Institute, Inc.)