Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".

Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Leuven Gent Management School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves.

Download or read book Dynamic Scheduling with Microsoft Project 2010 written by Rodolfo Ambriz and published by J. Ross Publishing. This book was released on 2011-05-15 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through the use of best practices, helpful screen shots, hands-on exercises, and review questions, this book instructs you on how to build dynamic schedules with Microsoft Project 2010 that will allow you to explore 'what if?' scenarios and decrease the time you spend making static schedule changes.

Download or read book Dynamic Scheduling with Microsoft Office Project 2007 written by Rodolfo Ambriz and published by J. Ross Publishing. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now fully revised and updated, this bestselling title provides practitioners a complete picture of why, when, and how to use the various new features of the 2007 version software with Service Pack 1 updates to their maximum potential and achieve the best results in real-world practice.

Download or read book The Data Driven Project Manager written by Mario Vanhoucke and published by Apress. This book was released on 2018-03-27 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover solutions to common obstacles faced by project managers. Written as a business novel, the book is highly interactive, allowing readers to participate and consider options at each stage of a project. The book is based on years of experience, both through the author's research projects as well as his teaching lectures at business schools. The book tells the story of Emily Reed and her colleagues who are in charge of the management of a new tennis stadium project. The CEO of the company, Jacob Mitchell, is planning to install a new data-driven project management methodology as a decision support tool for all upcoming projects. He challenges Emily and her team to start a journey in exploring project data to fight against unexpected project obstacles. Data-driven project management is known in the academic literature as “dynamic scheduling” or “integrated project management and control.” It is a project management methodology to plan, monitor, and control projects in progress in order to deliver them on time and within budget to the client. Its main focus is on the integration of three crucial aspects, as follows: Baseline Scheduling: Plan the project activities to create a project timetable with time and budget restrictions. Determine start and finish times of each project activity within the activity network and resource constraints. Know the expected timing of the work to be done as well as an expected impact on the project’s time and budget objectives. Schedule Risk Analysis: Analyze the risk of the baseline schedule and its impact on the project’s time and budget. Use Monte Carlo simulations to assess the risk of the baseline schedule and to forecast the impact of time and budget deviations on the project objectives. Project Control: Measure and analyze the project’s performance data and take actions to bring the project on track. Monitor deviations from the expected project progress and control performance in order to facilitate the decision-making process in case corrective actions are needed to bring projects back on track. Both traditional Earned Value Management (EVM) and the novel Earned Schedule (ES) methods are used. What You'll Learn Implement a data-driven project management methodology (also known as "dynamic scheduling") which allows project managers to plan, monitor, and control projects while delivering them on time and within budget Study different project management tools and techniques, such as PERT/CPM, schedule risk analysis (SRA), resource buffering, and earned value management (EVM) Understand the three aspects of dynamic scheduling: baseline scheduling, schedule risk analysis, and project control Who This Book Is For Project managers looking to learn data-driven project management (or "dynamic scheduling") via a novel, demonstrating real-time simulations of how project managers can solve common project obstacles

Download or read book Integrated Project Management Sourcebook written by Mario Vanhoucke and published by Springer. This book was released on 2016-03-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a unique, comprehensive resource for professional project managers and students in project management courses that focuses on the integration between baseline scheduling, schedule risk analysis and project control, also known as Dynamic Scheduling or Integrated Project Management and Control. It contains a set of more than 70 articles. Each individual article focuses on one particular topic and features links to other articles in this book, where appropriate. Almost all articles are accompanied with a set of questions, the answers to which are provided at the end of the book. This book is accompanied by and is based on the Project Management Knowledge Center (www.pmknowledgecenter.com), an online learning platform for Integrated Project Management.

Download or read book Dynamic Scheduling with Microsoft Project 2013 written by Rodolfo Ambriz and published by . This book was released on 2014 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsoft Project 2013 is a powerful software tool, and like all tools it requires knowledge and skill to be used to its maximum potential. This fully revised new edition provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Designed for the busy, practicing project manager, Dynamic Scheduling With Microsoft Project 2013 will help you get up to speed quickly with the new and enhanced features of Project 2013 (including Project Pro for Office 365) and enable you to create effective schedules using best practices, tips & tricks, and step-by-step instruction. Through the use of helpful screenshots, hands-on exercises, illustrations, and review questions, this guide instructs you on how to build dynamic schedules that will allow you to explore what-if scenarios and dramatically decrease the time you spend making static schedule changes. "A must read, reread, and use daily for all project managers" is what PMI's Project Management Journal had to say about the previous edition. This updated version is even better! Key Features Fully aligned with the PMBOK Guide - Fifth Edition, The Practice Standard for Work Breakdown Structures - Second Edition, The Practice Standard for Scheduling - Second Edition, and The Practice Standard for Earned Value Management - Second Edition by the Project Management Institute Validated training material for the new Microsoft Certification Exam 74-343: Managing Projects with Microsoft Project 2013 Captures the best practices and insights that have been gained from thousands of real-life schedules and years of training project managers across all industries WAV offers downloadable exercise files, a glossary of terms, filters to check your own project, an advance topics appendix, and a solutions manual for college professors available from the Web Added Value Download Resource Center at www.jrosspub.com.

Download or read book Integrated Project Management and Control written by Mario Vanhoucke and published by Springer. This book was released on 2014-07-08 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an integrated approach to monitoring projects in progress using Earned Value and Earned Schedule Management combined with Schedule Risk Analysis. Monitoring and controlling projects involves processes for identifying potential problems in a timely manner. When necessary, corrective actions can be taken to exploit project opportunities or to get faltering projects back on track. The prerequisite is that project performance is observed and measured regularly to identify variances from the project baseline schedule. Therefore, monitoring the performance of projects in progress requires a set of tools and techniques that should ideally be combined into a single integrated system. The book offers a valuable resource for anyone who wants to understand the theory first and then to use it in practice with software tools. It is intended for students, professionals and academics with an interest and/or experience in running projects as well as for newcomers in the area of project control with a basic grasp of the Earned Value, Earned Schedule and Schedule Risk Analysis concepts.

Download or read book Dynamic Scheduling with Microsoft Office Project 2003 written by Eric Uyttewaal and published by J. Ross Publishing. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsoft Office Project 2003 is a powerful software tool, and like all tools, it requires knowledge and skill to be used to its maximum potential. This fully revised new edition of Eric Uyttewaal's best-selling book on Microsoft Project provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Dynamic Scheduling with Microsoftr Office Project 2003: The Book By and For Professionals is not only written by a certified PMP and project management practitioner with over 17 years of experience using and teaching MS Project, but is also based on the cumulative experience of the author's clients, other instructors, and includes insights from numerous other professionals who have used MS Office Project successfully.

Download or read book Practice Standard for Scheduling Third Edition written by Project Management Institute and published by Project Management Institute. This book was released on 2019-05-02 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practice Standard for Scheduling—Third Edition provides the latest thinking regarding good and accepted practices in the area of scheduling for a project. This updated practice standard expounds on the information contained in Section 6 on Project Schedule Management of the PMBOK® Guide. In this new edition, you will learn to identify the elements of a good schedule model, its purpose, use, and benefits. You will also discover what is required to produce and maintain a good schedule model. Also included: a definition of schedule model; uses and benefits of the schedule model; definitions of key terms and steps for scheduling; detailed descriptions of scheduling components; guidance on the principles and concepts of schedule model creation and use; descriptions of schedule model principles and concepts; uses and applications of adaptive project management approaches, such as agile, in scheduling; guidance and information on generally accepted good practices; and more.

Download or read book Construction Project Scheduling and Control written by Saleh A. Mubarak and published by John Wiley & Sons. This book was released on 2010-10-26 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easy-to-follow guide to the theory and practice of project scheduling and control No matter how large or small the construction project, an efficient, well-thought-out schedule is crucial to achieving success. The schedule manages all aspects of a job, such as adjusting staff requirements at various stages, overseeing materials deliveries and equipment needs, organizing inspections, and estimating time needs for curing and settling—all of which requires a deep understanding on the part of the scheduler. Written by a career construction professional, Construction Project Scheduling and Control, Second Edition has been fully revised with up-to-date coverage detailing all the steps needed to devise a technologically advanced schedule geared toward streamlining the construction process. Solved and unsolved exercises reinforce learning, while an overview of industry standard computer software sets the tone for further study. Some of the features in this Second Edition include: Focus on precedence networks as a viable solution to scheduling, the main part of project control The concepts of Dynamic Minimal Lag, a new CPM technique developed by the author A new chapter on schedule risk management By combining basic fundamentals with advanced techniques alongside the robust analysis of theory to enhance real-world applications, Construction Project Scheduling and Control is an ideal companion for students and professionals looking to formulate a schedule for a time-crunched industry in need of better ways to oversee projects.

Download or read book Integrated Cost and Schedule Control in Project Management written by Ursula Kuehn and published by Berrett-Koehler Publishers. This book was released on 2010-10-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Practical, Precise, and Proven Approach to Integrated Cost and Schedule Control! This trusted project management resource, now in its second edition, includes expanded coverage of how integrated cost and schedule control works within the federal government. With the renewed emphasis on transparency in government, the processes detailed in this book are particularly relevant. Building on the solid foundation of the first edition, this updated second edition includes new material on: • Project planning in the federal government • Integrated baseline reviews • Federal requirements for an ANSI/EIA-748 compliant earned value management system • Federal requirements for performance reports Integrated Cost and Schedule Control in Project Management, Second Edition, continues to offer a practical approach that is accessible to project managers at all levels. The step-by-step presentation, numerous case studies, and instructive examples give practitioners relevant material they can put to use immediately.

Download or read book Scheduling of Resource Constrained Projects written by Robert Klein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project management has become a widespread instrument enabling organizations to efficiently master the challenges of steadily shortening product life cycles, global markets and decreasing profit margins. With projects increasing in size and complexity, their planning and control represents one of the most crucial management tasks. This is especially true for scheduling, which is concerned with establishing execution dates for the sub-activities to be performed in order to complete the project. The ability to manage projects where resources must be allocated between concurrent projects or even sub-activities of a single project requires the use of commercial project management software packages. However, the results yielded by the solution procedures included are often rather unsatisfactory. Scheduling of Resource-Constrained Projects develops more efficient procedures, which can easily be integrated into software packages by incorporated programming languages, and thus should be of great interest for practitioners as well as scientists working in the field of project management. The book is divided into two parts. In Part I, the project management process is described and the management tasks to be accomplished during project planning and control are discussed. This allows for identifying the major scheduling problems arising in the planning process, among which the resource-constrained project scheduling problem is the most important. Part II deals with efficient computer-based procedures for the resource-constrained project scheduling problem and its generalized version. Since both problems are NP-hard, the development of such procedures which yield satisfactory solutions in a reasonable amount of computation time is very challenging, and a number of new and very promising approaches are introduced. This includes heuristic procedures based on priority rules and tabu search as well as lower bound methods and branch and bound procedures which can be applied for computing optimal solutions.

Download or read book Location Based Management for Construction written by Russell Kenley and published by Routledge. This book was released on 2006-09-27 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: With extensive case studies for illustration, this is a practitioner's guide to an entirely new production system for construction management using flowline scheduling. Covering the entire process of presenting a comprehensive management system – from design, through measurement, scheduling, and visualization and control – its emphasis is on reducing cost and increasing quality. Drawing its components together into a management system, the authors not only include theory and explanations of how and why it works, but also examine and present a suite of methods for successful project implementation. Perfect as a how-to guide for researchers and advanced construction students to discover the simple application of the new techniques, and invaluable for acquiring the practical tools for planning and controlling projects.

Download or read book Faster Construction Projects with CPM Scheduling written by Murray B. Woolf and published by McGraw Hill Professional. This book was released on 2007-03-13 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMPLETE YOUR CONSTRUCTION PROJECTS FASTER - USING THE LATEST CONCEPTS IN PERFORMANCE CONTROL A comprehensive review that gives you insight into the latest innovations in network-based project planning, scheduling, and control...saving you time and money on all construction projects. Faster Construction Projects with CPM Scheduling contains a full explanation of the new and innovative Scheduling Practice Paradigm, and translates it into tangible steps you can use to create powerful project schedules designed to boost productivity on any job. Completely compatible with the Collaborative Model, the new Scheduling Practice Paradigm provides, commitment planning, execution scheduling, and comprehensive performance control. Written in a friendly, conversational style, this ultimate guide explains: The new Scheduling Practice Paradigm: terminology, specialties, roles, and deliverables How dilemma forecasting can help you predict delays before they occur How to use change optimization processes for maximum project benefit How to produce a project schedule, including logic development sessions Helpful guidelines for performance recording Hundreds of “tricks of the trade” from a 30-year Scheduling veteran

Download or read book Measuring Time written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2009-10-09 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meant to complement rather than compete with the existing books on the subject, this book deals with the project performance and control phases of the project life cycle to present a detailed investigation of the project’s time performance measurement methods and risk analysis techniques in order to evaluate existing and newly developed methods in terms of their abilities to improve the corrective actions decision-making process during project tracking. As readers apply what is learned from the book, EVM practices will become even more effective in project management and cost engineering. Individual chapters look at simulation studies in forecast accuracy; schedule adherence; time sensitivity; activity sensitivity; and using top-down or bottom-up project tracking. Vanhoucke also offers an actual real-life case study, a tutorial on the use of ProTrack software (newly developed based on his research) in EVM, and conclusions on the relative effectiveness for each technique presented.

Download or read book Project Scheduling written by Erik Leuven Demeulemeester and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our objectives in writing Project Scheduling: A Research Handbook are threefold: (1) Provide a unified scheme for classifying the numerous project scheduling problems occurring in practice and studied in the literature; (2) Provide a unified and up-to-date treatment of the state-of-the-art procedures developed for their solution; (3) Alert the reader to various important problems that are still in need of considerable research effort. Project Scheduling: A Research Handbook has been divided into four parts. Part I consists of three chapters on the scope and relevance of project scheduling, on the nature of project scheduling, and finally on the introduction of a unified scheme that will be used in subsequent chapters for the identification and classification of the project scheduling problems studied in this book. Part II focuses on the time analysis of project networks. Part III carries the discussion further into the crucial topic of scheduling under scarce resources. Part IV deals with robust scheduling and stochastic scheduling issues. Numerous tables and figures are used throughout the book to enhance the clarity and effectiveness of the discussions. For the interested and motivated reader, the problems at the end of each chapter should be considered as an integral part of the presentation.