Download or read book Advanced Plasma Technology written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of internationally renowned scientists discuss the latest results in plasma technology. This volume has been compiled with both a didactic approach and an overview of the newest achievements for industrial applications. It is divided into two main sections. One is focused on fundamental technology, including plasma production and control, high-pressure discharges, modeling and simulation, diagnostics, dust control, and etching. The section on application technology covers polymer treatments, silicon solar cell, coating and spray, biomaterials, sterilization and waste treatment, plasma propulsion, plasma display panels, and anti-corrosion coatings. The result is an indispensable work for physicists, chemists and engineers involved in the field of plasma technology.
Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories
Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume representing the second International Thermal Spray Conference (May 2004, Osaka, Japan) contains 232 papers and 93 poster presentations. Arrangement is in sections on applications, characterization methods for coating properties, coating technologies for vehicle engines, cold spray, consumables for thermal spraying, corrosion protection, economics and quality, HVOF processes and materials, innovative equipment and process technology, modeling and simulation, nanostructured materials, photocatalytic materials, process diagnostics, protective coatings against wear and erosion, and thermal barrier coatings. No index is provided, but the included CD- ROM presumably contains the contents in a searchable format. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Physical Properties of Ceramic and Carbon Nanoscale Structures written by Stefano Bellucci and published by Springer Science & Business Media. This book was released on 2011-02-28 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume in a series of books on selected topics in Nanoscale Science and Technology based on lectures given at the well-known INFN schools of the same name. The aim of this collection is to provide a reference corpus of suitable, introductory material to relevant subfields, as they mature over time, by gathering the significantly expanded and edited versions of tutorial lectures, given over the years by internationally known experts. The present set of notes stems in particular from the participation and dedication of prestigious lecturers, such as Andrzej Huczko, Nicola Pugno, Alexander Malesevic, Pasquale Onorato and Stefano Bellucci. All lectures were subsequently carefully edited and reworked, taking into account the extensive follow-up discussions. A tutorial lecture by Huczko et al. shows how a variety of carbon and ceramic nanostructures (nanotubes, nanowires, nanofibres, nanorods, and nanoencapsulates) have in particular great potential for improving our understanding of the fundamental concepts of the roles of both dimensionality and size on physical material properties . Bellucci and Onorato provide an extensive and tutorial review of the (quantum) transport properties in carbon nanotubes, encompassing a description of the electronic structure from graphene to single-wall nanotubes, as well as a discussion of experimental evidence of superconductivity in carbon nanotubes and the corresponding theoretical interpretation. In the first contribution by Pugno, new ideas on how to design futuristic self-cleaning, super-adhesive and releasable hierarchical smart materials are presented. He also reviews the mechanical strength of such nanotubes and megacables, with an eye to the visionary project of a carbon nanotube-based ‘space elevator megacable’. In his second contribution, Pugno outlines in detail the role on the fracture strength of thermodynamically unavoidable atomistic defects with different size and shape, both numerically and theoretically, for nanotubes and nanotube bundles. Focusing on graphitic allotropes, the chapter by Bellucci and Malesevic aims to give a taste of the widespread implications carbon nanostructures have on research and applications, starting from an historical overview, followed by a discussion of the structure and physical properties of carbon nanotubes and graphene, in particular in the context of the several different synthesis techniques presently available.
Download or read book Surface Modification Technologies XVIII Proceedings of the Eighteenth International Conference on Surface Modification Technologies Held in Dijon France November 15 17 2004 v 18 written by T.S. Sudarshan and published by CRC Press. This book was released on 2023-05-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the Eighteenth International Conference on Surface Modification Technologies Held in Dijon, France November 15-17, 2004. Delegates from thirty countries were represented at this meeting and these proceedings are a complete compilation of all the papers that were presented.
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book Advances in Heat Transfer written by James P. Hartnett and published by Elsevier. This book was released on 2007-10-09 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing wide-ranging and in-depth review articles. Put simply, this book is essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer in graduate schools or industry. The articles, which serve as a broad review for experts in the field, will also be of great interest to non-specialists who need to keep up-to-date with the results of the latest research. - Provides an overview of review articles on topics of current interest - Bridges the gap between academic researchers and practitioners in industry - A long-running and prestigious series
Download or read book Thermal Spray Fundamentals written by Maher I. Boulos and published by Springer Nature. This book was released on 2021-10-19 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised, industry-standard resource offers practical details on every aspect of the fundamentals necessary for understanding thermal spray technology, from powder all the way to the final part. The second edition is presented in a reader-friendly format that is split into four parts. Part I presents a review of thermal spray coating and its position in the broad field of surface modification technologies. Highlights of combustion and thermal plasmas are given with an expanded treatment of in-flight plasma-particle interactions. The second and third parts deal respectively with an updated presentation of thermal spray technologies and coating formation, including solution and suspension plasma spraying. The last part of the book includes a comparative analysis of different thermal spray processes, which is essential for the optimal selection of the appropriate thermal spray process in a given application. Coverage of system integration has been expanded with the addition of a detailed discussion of online instrumentation and process diagnostics and numerous examples of industrial scale spray booth designs. Attention is also given to coating finishing and health and safety issues. An extensive review is presented of thermal spray applications grouped in terms of process objectives and present use in different industrial sectors. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in the thermal spray field.
Download or read book Progress in Advanced Structural and Functional Materials Design written by Tomoyuki Kakeshita and published by Springer Science & Business Media. This book was released on 2012-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes clearly various research topics investigated for these 10 years in the Research Center of Advanced Structural and Functional Materials Design in Osaka University, Japan. Every chapter is aimed at understanding most advanced researches in materials science by describing its fundamentals and details as much as possible. Since both general explanations and cutting-edge commentaries are given for each topic in this book, it provides a lot of useful information for ordinary readers as well as materials scientists & engineers who wish to understand the future development in materials science fields of metals, alloys, ceramics, semiconductors etc. In particular, this book deals with special fusion area of structural and functional materials such as medical bone materials, of which contents are very unique features as materials science textbook.
Download or read book 17th International Symposium on Plasma Chemistry written by Javad T. Mostaghimi and published by . This book was released on 2005 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2010-07-27 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors.After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control.With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing - Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)
Download or read book The Proceedings of the 9th Frontier Academic Forum of Electrical Engineering written by Weijiang Chen and published by Springer Nature. This book was released on 2021-04-20 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer-reviewed research papers from the 9th Frontier Academic Forum of Electrical Engineering (FAFEE 2020), held in Xi’an, China, in August 2020. It gathers the latest research, innovations, and applications in the fields of Electrical Engineering. The topics it covers including electrical materials and equipment, electrical energy storage and device, power electronics and drives, new energy electric power system equipment, IntelliSense and intelligent equipment, biological electromagnetism and its applications, and insulation and discharge computation for power equipment. Given its scope, the book benefits all researchers, engineers, and graduate students who want to learn about cutting-edge advances in Electrical Engineering.
Download or read book Advances in Materials and Materials Processing IV written by Zheng Yi Jiang and published by Trans Tech Publications Ltd. This book was released on 2014-02-06 with total page 1363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China
Download or read book Progress in Thermal Barrier Coatings written by ACerS (American Ceramics Society, The) and published by John Wiley & Sons. This book was released on 2009-07-15 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the Progress in Ceramic Technology series compiles articles published on thermal barrier coatings (TBCs) by The American Ceramic Society (ACerS). It collects in one resource the current research papers on materials-related aspects of thermal barrier coatings and associated technologies. Logically organized and carefully selected, the papers in this edition divide into six categories: Applications Material Improvements and Novel Compositions Developments in Processing Mechanical Properties Thermal Properties Citations follow each title in the table of contents, making this a key resource for professionals and academia.
Download or read book Silver Based Antimicrobials written by Raymond J. Turner and published by MDPI. This book was released on 2021-02-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is some talk about an antibiotic Armageddon due to quickly developing resistance towards commercially available antibiotics. For the most part, the classical antibiotic pipeline has dried up, and antibiotic resistance to any new drugs quickly develops. It is here that metal-based antimicrobials can step forward as possible solutions in this antimicrobial resistance era. The biological targets of metal atoms are more diverse, thus making it more difficult for bacteria to develop resistance compared with classical antibiotics. The metal silver has been used since antiquity for wound healing and water purification. At present, it is the most prevalent antimicrobial metal used in healthcare, industry, and consumer products. Silver is being used in the form of ionic salt, colloids, or in specific nanomaterials, and as described in this book, it can be applied as mixtures with other antimicrobials or coating composites. The different formulations are explored for their efficacy against a variety of problems related to agricultural and medical infections. Whilst by no means exhaustive, this book nicely highlights the present directions in silver-based antimicrobial research and antimicrobial formulation development. The chapters have been organized from a general introductory review to approaches of mixing other antimicrobials and materials to enhance silver performance. This is followed by synthetic approaches. First are biogenic (sometimes called green or eco-friendly) approaches, followed by advanced physical–chemical synthetic approaches. The book ends with an overview of applications through a review of patents over the past 10 years.
Download or read book Novel Structured Metallic and Inorganic Materials written by Yuichi Setsuhara and published by Springer. This book was released on 2019-07-01 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a series of research topics investigated during the 6 years from 2010 through 2015 in the project "Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials". Every section of the book is aimed at understanding the most advanced research by describing details starting with the fundamentals as often as possible. Because both fundamental and cutting-edge topics are contained in this book, it provides a great deal of useful information for chemists as well as for materials scientists and engineers who wish to consider future prospects and innovations. The contents of Novel Structured Metallic and Inorganic Materials are unique in materials science and technology. The project was carried out through the cooperation of research groups in the following six institutes in Japan: the Institute for Materials Research (IMR), Tohoku University; the Materials and Structures Laboratory (MSL), Tokyo Institute of Technology; the Joining and Welding Research Institute (JWRI), Osaka University; the Eco-Topia Science Institute (EST), Nagoya University; the Institute of Biomaterials and Bioengineering (IBB), Tokyo Medical and Dental University; and the Institute for Nanoscience and Nanotechnology (INN), Waseda University. Major objectives of the project included creation of advanced metallic and inorganic materials with a novel structure, as well as development of materials-joining technologies for development of cutting-edge applications as environmental and energy materials, biomedical materials, and electronic materials for contributing to the creation of a safer and more secure society.
Download or read book Agglomeration in Industry 2 Volume Set written by Wolfgang B. Pietsch and published by John Wiley & Sons. This book was released on 2004-12-27 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wann tritt Agglomeration auf, wie lässt sie sich vermeiden und in welchen Fällen kann man sie sinnvoll nutzen? Ausführliche Antworten auf diese Fragen gibt Ihnen der Autor dieses Bandes, Fachmann und Berater mit langjähriger Industrieerfahrung. Neben den traditionellen Anwendungsgebieten der Agglomeration (unter anderem pharmazeutische Industrie, Nahrungs- und Futtermittelherstellung, Düngerproduktion und Agrochemie, Baustoffindustrie, Bergbau und Metallverarbeitung) werden auch aktuellste Entwicklungen, etwa im Bereich der Nanotechnologie, besprochen.
