Download or read book Progress in Ferromagnetism Research written by V. N. Murray and published by Nova Publishers. This book was released on 2006 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferromagnetism is a form of magnetism that can be acquired in an external magnetic field and usually retained in its absence, so that ferromagnetic materials are used to make permanent magnets. A ferromagnetic material may therefore be said to have a high magnetic permeability and susceptibility (which depends upon temperature). Examples are iron, cobalt, nickel, and their alloys. Ultimately, ferromagnetism is caused by spinning electrons in the atoms of the material, which act as tiny weak magnets. They align parallel to each other within small regions of the material to form domains, or areas of stronger magnetism. In an unmagnetised material, the domains are aligned at random so there is no overall magnetic effect. If a magnetic field is applied to that material, the domains align to point in the same direction, producing a strong overall magnetic effect. Permanent magnetism arises if the domains remain aligned after the external field is removed. Ferromagnetic materials exhibit hysteresis. In 2004, it was discovered that a certain allotrope of carbon, nanofoam , exhibited ferromagnetism. The effect dissipates after a few hours at room temperature, but lasts longer at cold temperatures. The material is also a semiconductor. It is thought that other similarly formed materials, of boron and nitrogen, may also be ferromagnetic. This new book rings together leading research from throughout the world.

Download or read book New Developments in Ferromagnetism Research written by V. N. Murray and published by Nova Publishers. This book was released on 2005 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferromagnetism is a form of magnetism that can be acquired in an external magnetic field and usually retained in its absence, so that ferromagnetic materials are used to make permanent magnets. A ferromagnetic material may therefore be said to have a high magnetic permeability and susceptibility (which depends upon temperature). Examples are iron, cobalt, nickel, and their alloys. Ultimately, ferromagnetism is caused by spinning electrons in the atoms of the material, which act as tiny weak magnets. They align parallel to each other within small regions of the material to form domains, or areas of stronger magnetism. In an unmagnetised material, the domains are aligned at random so there is no overall magnetic effect. If a magnetic field is applied to that material, the domains align to point in the same direction, producing a strong overall magnetic effect. Permanent magnetism arises if the domains remain aligned after the external field is removed. Ferromagnetic materials exhibit hysteresis. In 2004, it was discovered that a certain allotrope of carbon, nanofoam, exhibited ferromagnetism. The effect dissipates after a few hours at room temperature, but lasts longer at cold temperatures. The material is also a semiconductor. It is thought that other similarly formed materials, of boron and nitrogen, may also be ferromagnetic. This new book rings together leading research from throughout the world.

Download or read book Progress in Ferromagnetism Research written by Murray V.N. and published by . This book was released on 2006 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physics of Ferromagnetism written by Terunobu Miyazaki and published by Springer Science & Business Media. This book was released on 2012-08-22 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic physics of ferromagnetism, such as magnetic moment, exchange coupling, magnetic anisotropy, and recent progress in advanced ferromagnetic materials. Special focus is placed on NdFeB permanent magnets and the materials studied in the field of spintronics (explaining the development of tunnel magnetoresistance effect through the so-called giant magnetoresistance effect).

Download or read book New Developments in Ferromagnetic Materials written by Jacob Louis Snoek and published by . This book was released on 1949 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research Frontiers in Magnetochemistry written by Charles J. O'Connor and published by World Scientific. This book was released on 1993 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 25 years, there have been many advances in the understanding of magnetic phenomena in molecular systems. For example, a variety of low-dimensional materials, and many new ferromagnetic, antiferromagnetic, and ferrimagnetic systems have been synthesized and analyzed; metal cluster compounds that exhibit magnetic exchange have been examined; new orbital overlap theories have been proposed to explain magneto-structural correlations in exchange coupled systems; and efforts directed toward the preparation of an organic ferromagnetic material have produced new and interesting compounds. There have also been many advances in the use of magnetism as a probe of inorganic biomolecules.This volume brings together reviews of current research in magnetochemistry that are written by the world's leading researchers in the fields of chemistry, physics, materials science, and magnetism. It contains comprehensive and in-depth reviews that describe some of the current activities of these scientists and their research and lays the foundation for future research endeavors.

Download or read book New Developments in Ferromagnetic Materials written by Jacob Louis Snoek and published by . This book was released on 1947 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Advanced Magnetic Materials written by Yi Liu and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 2002, the world's first commercial magnetic levitation super-train went into operation in Shanghai. The train is held just above the rails by magnetic levitation (maglev) and can travel at a speed of 400 km/hr, completing the 30km journey from the city to the airport in minutes. Now consumers are enjoying 50 GB hard drives compared to 0.5 GB hard drives ten years ago. Achievements in magnetic materials research have made dreams of a few decades ago reality. The objective of the four volume reference, Handbook of Advanced Magnetic Materials, is to provide a comprehensive review of recent progress in magnetic materials research. Each chapter will have an introduction to give a clear definition of basic and important concepts of the topic. The details of the topic are then elucidated theoretically and experimentally. New ideas for further advancement are then discussed. Sufficient references are also included for those who wish to read the original work. In the last decade, one of the most significant thrust areas of materials research has been nanostructured magnetic materials. There are several critical sizes that control the behavior of a magnetic material, and size effects become especially critical when dimensions approach a few nanometers, where quantum phenomena appear. The first volume of the book, Nanostructured Advanced Magnetic Materials, has therefore been devoted to the recent development of nanostructured magnetic materials, emphasizing size effects. Our understanding of magnetism has advanced with the establishment of the theory of atomic magnetic moments and itinerant magnetism. Simulation is a powerful tool for exploration and explanation of properties of various magnetic materials. Simulation also provides insight for further development of new materials. Naturally, before any simulation can be started, a model must be constructed. This requires that the material be well characterized. Therefore the second volume, Characterization and Simulation provides a comprehensive review of both experimental methods and simulation techniques for the characterization of magnetic materials. After an introduction, each section gives a detailed description of the method and the following sections provide examples and results of the method. Finally further development of the method will be discussed. The success of each type of magnetic material depends on its properties and cost which are directly related to its fabrication process. Processing of a material can be critical for development of artificial materials such as multilayer films, clusters, etc. Moreover, cost-effective processing usually determines whether a material can be commercialized. In recent years processing of materials has continuously evolved from improvement of traditional methods to more sophisticated and novel methods. The objective of the third volume, Processing of Advanced Magnetic Materials, is to provide a comprehensive review of recent developments in processing of advanced magnetic materials. Each chapter will have an introduction and a section to provide a detailed description of the processing method. The following sections give detailed descriptions of the processing, properties and applications of the relevant materials. Finally the potential and limitation of the processing method will be discussed. The properties of a magnetic material can be characterized by intrinsic properties such as anisotropy, saturation magnetization and extrinsic properties such as coercivity. The properties of a magnetic material can be affected by its chemical composition and processing route. With the continuous search for new materials and invention of new processing routes, magnetic properties of materials cover a wide spectrum of soft magnetic materials, hard magnetic materials, recording materials, sensor materials and others. The objective of the fourth volume, Properties and Applications of Advanced Magnetic Materials, is to provide a comprehensive review of recent development of various magnetic materials and their applications. Each chapter will have an introduction of the materials and the principles of their applications. The following sections give a detailed description of the processing, properties and applications. Finally the potential and limitation of the materials will be discussed.

Download or read book Band Ferromagnetism written by K. Baberschke and published by Springer Science & Business Media. This book was released on 2001-08-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fascinating phenomenon ferromagnetism is far from being fully understood, although it surely belongs to the oldest problems of solid state physics. For any investigation it appears recommendable to distinguish between materials whose spontaneous magnetization stems from localized electrons of a partially ?lled atomic shell and those in which it is due to itinerant electrons of a partially ?lled conduction band. In the latter case one speaks of band-ferromagnetism, prototypes of which are the classical ferromagnets Fe, Co, and Ni. The present book is a status report on the remarkable progress that has recently been made towards a microscopic understanding of band-ferromagnetism as an electron c- relation e?ect. The authors of the various chapters of this book “Band-Ferromagnetism: Ground-State and Finite-Temperature Phenomena” participated as selected - perts in the 242nd WE-Heraeus-Seminar (4-6 October 2000) held under almost the same title in Wandlitz near Berlin (Germany). It was the second seminar of this type in Wandlitz. (The ?rst in 1998 dealt with the complementary topic of the physics of local-moment ferromagnets such as Gd). Twenty-six invited spe- ers from ten di?erent countries together with ?fty-?ve further participants, who presented contributions in form of posters, spent three days together discussing in an enthusiastic and fertile manner the hot topics of band-ferromagnetism.

Download or read book Progress Report on Investigation of the Effects of Impurities on the Ferro magnetism of Non ferrous Alloys written by Allison Butts and published by . This book was released on 1944 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research in Progress written by and published by . This book was released on 1991 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetic Fabric written by Geological Society of London and published by Geological Society of London. This book was released on 2004 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relationship between magnetic fabric and petrofabric is complex and depends on various factors including the composition, concentration and grain size of mineral grains. Ongoing research in geological applications is paralleled by studies of the fundamental mineral magnetic phenomena involved. The papers in this book represent the current state of investigations in magnetic anisotropy studies as a discipline that integrates geological interpretations, mineral fabric development, technical advances and rock-magnetic properties.

Download or read book Progress Reports Metallurgical Division written by Earl T. Hayes and published by . This book was released on 1941 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluorine Compounds Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluorine Compounds—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Fluorine Compounds—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Fluorine Compounds—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Advances in Magnetism of Soils and Sediments written by Sara Satolli and published by Frontiers Media SA. This book was released on 2021-09-08 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Magnetic Materials written by Sam Zhang and published by CRC Press. This book was released on 2017-02-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Magnetic Materials: Processing, Properties, and Performance discusses recent developments of magnetic materials, including fabrication, characterization and applications in the aerospace, biomedical, and semiconductors industries. With contributions by international professionals who possess broad and varied expertise, this volume encompasses both bulk materials and thin films and coatings for magnetic applications. A timely reference book that describes such things as ferromagnetism, nanomaterials, and Fe, ZnO, and Co-based materials, Advances in Magnetic Materials is an ideal text for students, researchers, and professionals working in materials science. Describes recent developments of magnetic materials, including fabrication, characterization, and applications Addresses a variety of industrial applications, such as aerospace, biomedical, and semiconductors Discusses bulk materials and thin films and coatings Covers ferromagnetism, nanomaterials, Fe, ZnO, and Co-based materials Contains the contributions of international professionals with broad and varied expertise Covers a holistic range of magnetic materials in various aspects of process, properties, and performance