Download or read book Progress in Advanced Structural and Functional Materials Design written by Tomoyuki Kakeshita and published by Springer Science & Business Media. This book was released on 2012-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes clearly various research topics investigated for these 10 years in the Research Center of Advanced Structural and Functional Materials Design in Osaka University, Japan. Every chapter is aimed at understanding most advanced researches in materials science by describing its fundamentals and details as much as possible. Since both general explanations and cutting-edge commentaries are given for each topic in this book, it provides a lot of useful information for ordinary readers as well as materials scientists & engineers who wish to understand the future development in materials science fields of metals, alloys, ceramics, semiconductors etc. In particular, this book deals with special fusion area of structural and functional materials such as medical bone materials, of which contents are very unique features as materials science textbook.
Download or read book Recent Advances in Complex Functional Materials written by Elson Longo and published by Springer. This book was released on 2017-07-12 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we explore new approaches to understanding the physical and chemical properties of emergent complex functional materials, revealing a close relationship between their structures and properties at the molecular level. The primary focus of this book is on the ability to synthesize materials with a controlled chemical composition, a crystallographic structure, and a well-defined morphology. Special attention is also given to the interplay of theory, simulation and experimental results, in order to interconnect theoretical knowledge and experimental approaches, which can reveal new scientific and technological directions in several fields, expanding the versatility to yield a variety of new complex materials with desirable applications and functions. Some of the challenges and opportunities in this field are also discussed, targeting the development of new emergent complex functional materials with tailored properties to solve problems related to renewable energy, health, and environmental sustainability. A more fundamental understanding of the physical and chemical properties of new emergent complex functional materials is essential to achieving more substantial progress in a number of technological fields. With this goal in mind, the editors invited acknowledged specialists to contribute chapters covering a broad range of disciplines.
Download or read book Advances in Memristor Neural Networks written by Calin Ciufudean and published by BoD – Books on Demand. This book was released on 2018-10-03 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, scientific research deals with alternative solutions for creating non-traditional computing systems, such as neural network architectures where the stochastic nature and live dynamics of memristive models play a key role. The features of memristors make it possible to direct processing and analysis of both biosystems and systems driven by artificial intelligence, as well as develop plausible physical models of spiking neural networks with self-organization. This book deals with advanced applications illustrating these concepts, and delivers an important contribution for the achievement of the next generation of intelligent hybrid biostructures. Different modeling and simulation tools can deliver an alternative to funding the theoretical approach as well as practical implementation of memristive systems.
Download or read book Electrical Engineering And Automation Proceedings Of The International Conference On Electrical Engineering And Automation Eea2016 written by Zhang Xiaoxing and published by World Scientific. This book was released on 2017-04-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th–26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring. The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.
Download or read book Magnetic Nanoparticles written by Abdollah Hajalilou and published by John Wiley & Sons. This book was released on 2022-10-03 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nanoparticles Learn how to make and use magnetic nanoparticles in energy research, electrical engineering, and medicine In Magnetic Nanoparticles: Synthesis, Characterization, and Applications, a team of distinguished engineers and chemists delivers an insightful overview of magnetic materials with a focus on nano-sized particles. The book reviews the foundational concepts of magnetism before moving on to the synthesis of various magnetic nanoparticles and the functionalization of nanoparticles that enables their use in specific applications. The authors also highlight characterization techniques and the characteristics of nanostructured magnetic materials, like superconducting quantum interference device (SQUID) magnetometry. Advanced applications of magnetic nanoparticles in energy research, engineering, and medicine are also discussed, and explicit derivations and explanations in non-technical language help readers from diverse backgrounds understand the concepts contained within. Readers will also find: A thorough introduction to magnetic materials, including the theory and fundamentals of magnetization In-depth explorations of the types and characteristics of soft and hard magnetic materials Comprehensive discussions of the synthesis of nanostructured magnetic materials, including the importance of various preparation methods Expansive treatments of the surface modification of magnetic nanoparticles, including the technical resources employed in the process Perfect for materials scientists, applied physicists, and measurement and control engineers, Magnetic Nanoparticles: Synthesis, Characterization, and Applications will also earn a place in the libraries of inorganic chemists.
Download or read book Advances in Materials Science for Environmental and Energy Technologies written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2012-11-05 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in advances in materials science for environmental and energy technologies. Logically organized and carefully selected, the articles cover the themes of the symposia: Green Technologies for Materials Manufacturing and Processing; Materials Science Challenges for Nuclear Applications; Materials for Nuclear Waste Disposal and Environmental Cleanup; Energy Conversion/Fuel Cells; and Energy Storage: Materials, Systems and Applications.
Download or read book Advances in Multifunctional Materials and Systems written by Jun Akedo and published by John Wiley & Sons. This book was released on 2010-07-23 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposia Advances in Electroceramics and Microwave Materials and Their Applications were held during the 8th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 8) from May 31-June 5, 2009 in Vancouver, Canada. This issue contains 17 peer-reviewed papers (invited and contributed) from these two symposia. The book is logically organized and carefully selected articles give insight into multifunctional materials and systems and incorporates the latest developments related to multifunctional materials and systems including electroceramics and microwave materials.
Download or read book Advances in Materials Science for Environmental and Nuclear Technology II written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2011-07-12 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 29 papers from the Clean Energy: Fuel Cells, Batteries, Renewables; Green Technologies for Materials Manufacturing and Processing II; and Materials Solutions for the Nuclear Renaissance symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include Batteries; Corrosion and Materials Degradation; Fuel Cells & Electrochemistry; Fossil Energy Materials; Solar Energy; Waste Minimization; Green Manufacturing and Materials Processing; Immobilization of Nuclear Wastes; Irradiation and Corrosion Effects; and Materials Performance in Extreme Environments.
Download or read book Advances in Bioceramics and Biotechnologies written by Roger Narayan and published by John Wiley & Sons. This book was released on 2010-10-11 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of twenty-two cutting edge research papers from the symposia on Nano-Biotechnology and Ceramics in Biomedical Applications and Advances in Biomineralized Ceramics, Bioceramics, and Bioinspired Designs, which were presented at the 8th Pacific Rim Conference on Ceramics and Glass Technology (PACRIM-8). The symposia was focused on several key areas, including novel synthesis techniques, bioglasses and glass-ceramics, calcium phosphates for bone tissue applications, and oxide ceramic implant applications. These papers cut across disciplines - ceramic science and technology, bioengineering and nanoscience - showing that a new, exciting field has emerged in the ceramics community.
Download or read book Joining and Assembly of Medical Materials and Devices written by Y N Zhou and published by Elsevier. This book was released on 2013-05-31 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: As medical devices become more intricate, with an increasing number of components made from a wide range of materials, it is important that they meet stringent requirements to ensure that they are safe to be implanted and will not be rejected by the human body. Joining and assembly of medical materials and devices provides a comprehensive overview of joining techniques for a range of medical materials and applications.Part one provides an introduction to medical devices and joining methods with further specific chapters on microwelding methods in medical components and the effects of sterilization on medical materials and welded devices. Part two focuses on medical metals and includes chapters on the joining of shape memory alloys, platinum (Pt) alloys and stainless steel wires for implantable medical devices and evaluating the corrosion performance of metal medical device welds. Part three moves on to highlight the joining and assembly of medical plastics and discusses techniques including ultrasonic welding, transmission laser welding and radio frequency (RF)/dielectric welding. Finally, part four discusses the joining and assembly of biomaterial and tissue implants including metal-ceramic joining techniques for orthopaedic applications and tissue adhesives and sealants for surgical applications.Joining and assembly of medical materials and devices is a technical guide for engineers and researchers within the medical industry, professionals requiring an understanding of joining and assembly techniques in a medical setting, and academics interested in this field. Introduces joining methods in medical applications including microwelding and considers the effects of sterilization on the resulting joints and devices Considers the joining, assembly and corrosion performance of medical metals including shape memory alloys, platinum alloys and stainless steel wires Considers the joining and assembly of medical plastics including multiple welding methods, bonding strategies and adhesives
Download or read book Advances in Metallic Biomaterials written by Mitsuo Niinomi and published by Springer. This book was released on 2015-06-17 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews fundamental advances in the use of metallic biomaterials to reconstruct hard tissues and blood vessels. It also covers the latest advances in representative metallic biomaterials, such as stainless steels, Co-Cr alloys, titanium and its alloys, zirconium, tantalum and niobium based alloys. In addition, the latest findings on corrosion, cytotoxic and allergic problems caused by metallic biomaterials are introduced. The book offers a valuable reference source for researchers, graduate students and clinicians working in the fields of materials, surgery, dentistry, and mechanics. Mitsuo Niinomi, PhD, D.D.Sc., is a Professor at the Institute for Materials Research, Tohoku University, Japan. Takayuki Narushima, PhD, is a Professor at the Department of Materials Processing, Tohoku University, Japan. Masaaki Nakai, PhD, is an Associate Professor at the Institute for Materials Research, Tohoku University, Japan.
Download or read book Advances in Ceramic Coatings and Ceramic Metal Systems written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 46 contributed articles from the Advanced Ceramic Coatings for Structural, Environmental and Functional Applications and the International Symposium on Advances in Ceramic-Metal Systems symposia. Topics include processing and microstructure design, mechanical and thermal properties, advanced testing and non-destructive evaluation, wear, erosion and corrosion behavior, functional properties and modeling. A significant portion of the contributed articles focus on current state-of-the-art industrial applications of ceramic coatings and ceramic-metal composites.
Download or read book Laser Additive Manufacturing of Metallic Materials and Components written by Dongdong Gu and published by Elsevier. This book was released on 2022-12-07 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing of Metallic Materials and Components discusses the current state and future development of laser additive manufacturing technologies, detailing material, structure, process and performance. The book explores the fundamental scientific theories and technical principles behind the elements of laser additive manufacturing, touching upon scientific and technological challenges faced by laser additive manufacturing technology. This book is suitable for those who want to further “understand and “master laser additive manufacturing technology and will expose readers to innovative industrial applications that meet significant demand from aeronautical and astronautical high-end modern industries for low-cost, short-cycle and net-shape manufacturing of structure-function integrated metallic components. With the increasing use of industrial applications, additive manufacturing processes are deepening, with technology continuing to evolve. As new scientific and technological challenges emerge, there is a need for an interdisciplinary and comprehensive discussion of material preparation and forming, structure design and optimization, laser process and its control, microstructure and performance characterization, and innovative industrial applications, hence this book covers these important aspects. Highlights an integration of material, structure, process and performance for laser additive manufacturing of metallic components to reflect the interdisciplinary nature of this technology Covers cross-scale structure and performance coordination mechanisms, including micro-scale material microstructure control, meso-scale interaction between laser beam and particle matter, and macro-scale precise forming of components and performance control Explores fundamental scientific theories and technical principles behind laser additive manufacturing processes Provides innovation elements and strategies for the future sustainable development of additive manufacturing technologies in terms of multi-materials design, novel bio-inspired structure design, tailored printing process with meso-scale monitoring, and high-performance and functionality of printed components
Download or read book Advanced Structural and Functional Materials written by Wolfgang G.J. Bunk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering materials are mainly used for structures. Therefore high-strength, stiffness and sufficient toughness are of prime importance. For a long time engineers thought first in terms of metals. Ma terial scientists developed alloys tailored to the needs of in dustry. Ceramics are known to be brittle and therefore not suitable in the first place for structural application under stress. Polymers with their low modulus became attractive when rein forced with high-strength fibres. Composites processed by poly mer, metal or ceramic matrices and high-strength reinforcements have been introduced into many sectors of industry. Engineering materials for structural applications fulfil a function: they withstand high stresses, temperatures, fatigue, creep etc. But usually we do not call them functional materials. Functional material serve applications apart from classical engineering fields. Electricity conducting materials, semi conductors, memory alloys and others are called functional materials. Both categories of materials structural and functional - cover the aspects of the DLR-Seminar 1991 on "Advanced structural and functional materials". in research and The seminar is focused on advanced materials development or at the edge of being introduced into the market. dual character: Preference was given to materials with a structural and functional, some of them more structural, some more functional in their potential. It was necessary to select typical and representative families of during the years by R + D activities somewhat matured mate rials. It was not intended to cover all possible innovations in a two half-days seminar.
Download or read book Advances in Quantum Chemistry written by Jun Kawai and published by Academic Press. This book was released on 2011-09-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Quantum Chemistry presents surveys of current developments in this rapidly developing field that falls between the historically established areas of mathematics, physics, chemistry, and biology. With invited reviews written by leading international researchers, each presenting new results, it provides a single vehicle for following progress in this interdisciplinary area. This volume concerns the proceedings of the 4th International Conference on the DV-Xá Method. The focus is on key issues of materials science, surfaces, boundaries, defects, metals, ceramics and organic materials and spectroscopy. The DV-Xá method is a Density Functional-like development, which has reached an unparalleled theoretical and practical sophistication in Japan and Korea. Publishes articles, invited reviews and proceedings of major international conferences and workshops Written by leading international researchers in quantum and theoretical chemistry Highlights important interdisciplinary developments
Download or read book Green Design Materials and Manufacturing Processes written by Helena Bartolo and published by CRC Press. This book was released on 2013-06-06 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Design, Materials and Manufacturing Processes includes essential research in the field of sustainable intelligent manufacturing and related topics, containing reviewed papers presented at the 2nd International Conference on Sustainable Intelligent Manufacturing 2013. Topics covered include Eco Design and Innovation, Energy Efficiency, Green and Smart Manufacturing, Green Transportation, Life-Cycle Engineering, Renewable Energy Technologies, Reuse and Recycling Techniques, Smart Design, Smart Materials, Sustainable Business Models and Sustainable Construction. Intended for engineers, architects, designers, economists and manufacturers dealing with key sustainability issues.
Download or read book Advances in Bioceramics and Porous Ceramics V Volume 33 Issue 6 written by Roger Narayan and published by John Wiley & Sons. This book was released on 2012-11-30 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of the Ceramic Engineering and Science Proceedings is one of nine issues published based on content presented in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). It features papers from two popular symposia held during the ICACC meeting: Next-Generation Bioceramics explores new research into ceramic materials designed to support and enhance the treatment of dental and medical disorders; Porous Ceramics: Novel Developments and Applications examines some of the latest advances and innovations in processing methods and synthesis, and much more. Charts, tables, and illustrations are included throughout this issue.
