Download or read book Production systems design robotics automation and mechatronics written by International Conference on Industrial Systems and published by . This book was released on 1996 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.

Download or read book Advanced Manufacturing Systems and Innovative Product Design written by B. B. V. L. Deepak and published by Springer Nature. This book was released on 2021-02-17 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the Conference on Innovative Product Design and Intelligent Manufacturing System (IPDIMS 2020). The book discusses the latest methods and advanced tools from different areas of design and manufacturing technology. The main topics covered include design methodologies, industry 4.0, smart manufacturing, and advances in robotics among others. The contents of this book are useful for academics as well as professionals working in the areas of industrial design, mechatronics, robotics, and automation.

Download or read book Engineering Creative Design in Robotics and Mechatronics written by Maki K. Habib and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: While technologies continue to advance in different directions, there still holds a constant evolution of interdisciplinary development. Robotics and mechatronics is a successful fusion of disciplines into a unified framework that enhances the design of products and manufacturing processes. Engineering Creative Design in Robotics and Mechatronics captures the latest research developments in the subject field of robotics and mechatronics and provides relevant theoretical knowledge in this field. Providing interdisciplinary development approaches, this reference source prepares students, scientists, and professional engineers with the latest research development to enhance their skills of innovative design capabilities.

Download or read book Mechatronics and Robotics Engineering for Advanced and Intelligent Manufacturing written by Dan Zhang and published by Springer. This book was released on 2016-08-22 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring selected contributions from the 2nd International Conference on Mechatronics and Robotics Engineering, held in Nice, France, February 18–19, 2016, this book introduces recent advances and state-of-the-art technologies in the field of advanced intelligent manufacturing. This systematic and carefully detailed collection provides a valuable reference source for mechanical engineering researchers who want to learn about the latest developments in advanced manufacturing and automation, readers from industry seeking potential solutions for their own applications, and those involved in the robotics and mechatronics industry.

Download or read book Robotics and Factories of the Future 87 written by R. Radharamanan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented at the Second International Conference on Robotics and Factories of the Future held in San Diego, California, USA during July 28-31, 1987 are compiled in this volume. Over two hundred participants attended the conference, made technical presentations and discussed about various aspects of manufacturing, robotics and factories of the future. The number of papers published in this volume and the number of unpublished presentations at the conference indicates the evidance of growing interest in the areas of CAD/CAM, robotics and their role in future factories. The conference consisted of five plenary sessions, twenty three technical sessions, workshops, and exhibits from local industries and educational institutions. I wish to acknowledge with many thanks the contributions of all the authors who presented their work at the conference and submitted the manuscripts for publication. It is also my pleasure to acknowledge the role of keynote, banquet, and plenary sessions speakers whose contributions added greatly to the success of the conference. My sincere thanks to all session chairmen. I wish that the series of the International Conferences on Robotics and Factories of the Future which was initiated in 1984 in Charlotte, North Carolina will have a major impact on the use of robots and computers in the automated factories of the future.

Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.

Download or read book CAD CAM Robotics and Factories of the Future written by Birendra Prasad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete shop floor automation - a "lights out factory", where workers initially set up all machines, turn off the lights, lock the door and the machine churns up the parts - remains an unfulfilled dream. Yet when we look at the enormity of the process of automation and integration even for the most simply conceived part factory, we can recognize that automation has been applied and is being applied, more so when it made sense from a cost/benefit standpoint. It is our nature to be dissatisfied with near term progress, but when we realize how short a time the tools to do that automation have been available, the progress is clearly noteworthy - considering the multitudes of factors and the environment we have to deal with. Most of the automa tion problems we confront in today's environment are multidisciplinary in nature. They require not just the knowledge and experience in various distinct fields but good cooperation from different disci plined organizations to adequately comprehend and solve such problems. In Volume III we have many examples that reflect the current state of the art techniques of robotics and plant automation. The papers for Volume III have been arranged in a logical order of automation planning, automated assembly, robot programming and simula tion, control, motion coordination, communication and networking to factories of the future.

Download or read book Interdisciplinary Mechatronics written by M. K. Habib and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics represents a unifying interdisciplinary and intelligent engineering science paradigm that features an interdisciplinary knowledge area and interactions in terms of the ways of work and thinking, practical experiences, and theoretical knowledge. Mechatronics successfully fuses (but is not limited to) mechanics, electrical, electronics, informatics and intelligent systems, intelligent control systems and advanced modeling, intelligent and autonomous robotic systems, optics, smart materials, actuators and biomedical and biomechanics, energy and sustainable development, systems engineering, artificial intelligence, intelligent computer control, computational intelligence, precision engineering and virtual modeling into a unified framework that enhances the design of products and manufacturing processes. Interdisciplinary Mechatronics concerns mastering a multitude of disciplines, technologies, and their interaction, whereas the science of mechatronics concerns the invention and development of new theories, models, concepts and tools in response to new needs evolving from interacting scientific disciplines. The book includes two sections, the first section includes chapters introducing research advances in mechatronics engineering, and the second section includes chapters that reflects the teaching approaches (theoretical, projects, and laboratories) and curriculum development for under- and postgraduate studies. Mechatronics engineering education focuses on producing engineers who can work in a high-technology environment, emphasize real-world hands-on experience, and engage in challenging problems and complex tasks with initiative, innovation and enthusiasm. Contents: 1. Interdisciplinary Mechatronics Engineering Science and the Evolution of Human Friendly and Adaptive Mechatronics, Maki K. Habib. 2. Micro-Nanomechatronics for Biological Cell Analysis and Assembly, Toshio Fukuda, Masahiro Nakajima, Masaru Takeuchi, Tao Yue and Hirotaka Tajima. 3. Biologically Inspired CPG-Based Locomotion Control System of a Biped Robot Using Nonlinear Oscillators with Phase Resetting, Shinya Aoi. 4. Modeling a Human’s Learning Processes toward Continuous Learning Support System, Tomohiro Yamaguchi, Kouki Takemori and Keiki Takadama. 5. PWM Waveform Generation Using Pulse-Type Hardware Neural Networks, Ken Saito, Minami Takato, Yoshifumi Sekine and Fumio Uchikoba. 6. Parallel Wrists: Limb Types, Singularities and New Perspectives, Raffaele Di Gregorio. 7. A Robot-Assisted Rehabilitation System – RehabRoby, Duygun Erol Barkana and Fatih Özkul. 8. MIMO Actuator Force Control of a Parallel Robot for Ankle Rehabilitation, Andrew Mcdaid, Yun Ho Tsoi and Shengquan Xie. 9. Performance Evaluation of a Probe Climber for Maintaining Wire Rope, Akihisa Tabata, Emiko Hara and Yoshio Aoki. 10. Fundamentals on the Use of Shape Memory Alloys in Soft Robotics, Matteo Cianchetti. 11. Tuned Modified Transpose Jacobian Control of Robotic Systems, S. A. A. Moosavian and M. Karimi. 12. Derivative-Free Nonlinear Kalman Filtering for PMSG Sensorless Control, Gerasimos Rigatos, Pierluigi Siano and Nikolaos Zervos. 13. Construction and Control of Parallel Robots, Moharam Habibnejad Korayem, Soleiman Manteghi and Hami Tourajizadeh. 14. A Localization System for Mobile Robot Using Scanning Laser and Ultrasonic Measurement, Kai Liu, Hongbo Li and Zengqi Sun. 15. Building of Open-Structure Wheel-Based Mobile Robotic Platform, Aleksandar Rodic and Ivan Stojkovic. 16. Design and Physical Implementation of Holonomous Mobile Robot–Holbos, Jasmin Velagic, Admir Kaknjo, Faruk Dautovic, Muhidin Hujdur and Nedim Osmic. 17. Advanced Artificial Vision and Mobile Devices for New Applications in Learning, Entertainment and Cultural Heritage Domains, Gian Luca Foresti, Niki Martinel, Christian Micheloni and Marco Vernier. 18. Application of Stereo Vision and ARM Processor for Motion Control, Moharam Habibnejad Korayem, Michal Irani and Saeed Rafee Nekoo. 19. Mechatronics as Science and Engineering – or Both, Balan Pillai and Vesa Salminen. 20. A Mechatronic Platform for Robotic Educational Activities, Ioannis Kostavelis, Evangelos Boukas, Lazaros Nalpantidis and Antonios Gasteratos. 21. The Importance of Practical Activities in the Formation of Mechatronic Engineers, Joao Carlos M. Carvalho and Vera Lúcia D.S. Franco About the Authors Maki K. Habib is Professor of Robotics and Mechatronics in the School of Science and Engineering, at the American University in Cairo, Egypt. He has been regional editor (Africa/Middle East,) for the International Journal of Mechatronics and Manufacturing Systems (IJMMS) since 2010. He is the recipient of academic awards and has published many articles and books. J. Paulo Davim is Aggregate Professor in the Department of Mechanical Engineering at the University of Aveiro, Portugal and is Head of MACTRIB (Machining and Tribology Research Group). His main research interests include manufacturing, materials and mechanical engineering.

Download or read book Mechatronics for Safety Security and Dependability in a New Era written by Eiji Arai and published by Elsevier. This book was released on 2006-09-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics for Safety, Security and Dependability in a New Era contains selected leading papers from the International Conference on Machine Automation 2004, the work of researchers from USA, Japan, China and Europe. The topics covered include: manufacturing systems such as CAD/CAM, machining and, human factors in manufacturing; robotics in relation to sensors and actuators, new control technology and, measuring and monitoring; the application of new technologies in connection with wireless communication, human behavior analysis and welfare. Mechatronics has been rapidly developing as an important area that affects all areas of society from industrial robots, automobiles, electrical appliances, computers and consumer goods etc. It also plays a role in safety recovery, such as for rescue tasks after disasters, destruction of hazardous and abandoned weapons and the restoration of polluted environments. The increasing need for safe, secure and dependable technology means that the advancement of mechatronics plays an essential role in the development of products and systems. This book provides an insight into developments in essential new methodologies and tools to design and to build machines to achieve this. - Covers key topics in manufacturing, such as machining, robotics, sensors, monitoring, etc. - Reviews modern applications of new technologies in connection with wireless communication, human behavior analysis, and welfare

Download or read book Automated Manufacturing Systems written by S. Brian Morriss and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1995 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text, which requires no prerequisites examines the components used in automated systems. It provides a balanced coverage of sensors, actuators, controllers and control theory and discusses some special-purpose automation components, automation systems and automation concepts. The text is unique in its clear, complete coverage of servosystems.

Download or read book Flexonics for Manufacturing and Robotics written by Jiajie Guo and published by Springer. This book was released on 2018-12-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theoretical research and application results of a study on flexible mechatronics (flexonics). Formulating distributed models in both time and spatial domains using a geometric approach, it presents a simple yet practical field-based sensing method for robotics and manufacturing, and illustrates its applications with examples such as exoskeletons, mobile sensor network and intelligent sensing.The book is of interest to researchers, engineers and graduate students in robotics, manufacturing and automation engineering who wish to learn the core principles, theories, technologies, and applications of flexonics.

Download or read book Robotics written by B. Z. Sandler and published by Academic Press. This book was released on 1999-04-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics, Second Edition is an essential addition to the toolbox of any engineer or hobbyist involved in the design of any type of robot or automated mechanical system. It is the only book available that takes the reader through a step-by step design process in this rapidly advancing specialty area of machine design. This book provides the professional engineer and student with important and detailed methods and examples of how to design the mechanical parts of robots and automated systems. Most robotics and automation books today emphasis the electrical and control aspects of design without any practical coverage of how to design and build the components, the machine or the system. The author draws on his years of industrial design experience to show the reader the design process by focusing on the real, physical parts of robots and automated systems. Answers the questions: How are machines built? How do they work? How does one best approach the design process for a specific machine? Thoroughly updated with new coverage of modern concepts and techniques, such as rapid modeling, automated assembly, parallel-driven robots and mechatronic systems Calculations for design completed with Mathematica which will help the reader through its ease of use, time-saving methods, solutions to nonlinear equations, and graphical display of design processes Use of real-world examples and problems that every reader can understand without difficulty Large number of high-quality illustrations Self-study and homework problems are integrated into the text along with their solutions so that the engineering professional and the student will each find the text very useful

Download or read book Robotics and Factories of the Future written by Suren N. Dwivedi and published by Springer. This book was released on 1984 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Product Design and Intelligent Manufacturing Systems written by BBVL. Deepak and published by Springer. This book was released on 2021-03-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected research articles from the International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS 2019), held at the National Institute of Technology, Rourkela, India. The book discusses latest methods and advanced tools from different areas of design and manufacturing technology. The main topics covered include design methodologies, industry 4.0, smart manufacturing, and advances in robotics among others. The contents of this book are useful for academics as well as professionals working in industrial design, mechatronics, robotics, and automation.

Download or read book Microprocessors in Robotic and Manufacturing Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessors play a dominant role in computer technology and have contributed uniquely in the development of many new concepts and design techniques for modem industrial systems. This contribution is excessively high in the area of robotic and manufacturing systems. However, it is the editor's feeling that a reference book describing this contribution in a cohesive way and covering the major hardware and software issues is lacking. The purpose of this book is exactly to fill in this gap through the collection and presentation of the experience of a number of experts and professionals working in different academic and industrial environments. The book is divided in three parts. Part 1 involves the first four chapters and deals with the utilization of microprocessors and digital signal processors ( DSPs ) for the computation of robot dynamics. The emphasis here is on parallel computation with particular problems attacked being task granularity, task allocation/scheduling and communication issues. Chapter I, by Zheng and Hemami, is concerned with the real-time multiprocessor computation of torques in robot control systems via the Newton-Euler equations. This reduces substantially the height of the evaluation tree which leads to more effective parallel processing. Chapter 2, by D'Hollander, examines thoroughly the automatic scheduling of the Newton-Euler inverse dynamic equations. The automatic program decomposition and scheduling techniques developed are embedded in a tool used to generate multiprocessor schedules from a high-level language program.

Download or read book Control Systems Design of Bio Robotics and Bio Mechatronics with Advanced Applications written by Ahmad Taher Azar and published by Academic Press. This book was released on 2019-11-30 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Systems Design of Bio-Robotics and Bio-Mechatronics with Advanced Applications delivers essential and advanced bioengineering information on the application of control and robotics technologies in the life sciences. Judging by what we have witnessed so far, this exciting field of control systems and robotics in bioengineering is likely to produce revolutionary breakthroughs over the next decade. While this book is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs, it will also appeal to medical researchers and practitioners who want to enhance their quantitative understanding of physiological processes. - Focuses on the engineering and scientific principles underlying the extraordinary performance of biomedical robotics and bio-mechatronics - Demonstrates the application of principles for designing corresponding algorithms - Presents the latest innovative approaches to medical diagnostics and procedures, as well as clinical rehabilitation from the point-of-view of dynamic modeling, system analysis and control