Download or read book Shop Floor Control Systems written by A. Bauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been a tremendous upsurge of interest in manufac turing systems design and analysis. Large industrial companies have realized that their manufacturing facilities can be a source of tremendous opportunity if managed well or a huge corporate liability if managed poorly. In particular industrial managers have realized the potential of well designed and installed production planning and control systems. Manufacturing, in an environment of short product life cycles and increasing product diversity, looks to tech niques such as manufacturing resource planning, Just In Time (lIT) and total quality control among others to meet the challenge. Customers are demanding high quality products and very fast turn around on orders. Manufacturing personnel are aware of the lead time from receipt of order to delivery of completed orders at the customer's premises. It is clear that this production lead time is, for the majority of manufacturing firms, greatly in excess of the actual processing or manufacturing time. There are many reasons for this, among them poor coordination between the sales and manufacturing function. Some are within the control of the manufacturing function. Others are not.
Download or read book Production Planning with SAP S 4HANA written by Jawad Akhtar and published by SAP PRESS. This book was released on 2019 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Production Management for the Factory of the Future written by Farhad Ameri and published by Springer Nature. This book was released on 2019-08-23 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 566 and 567 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2019, held in Austin, TX, USA. The 161 revised full papers presented were carefully reviewed and selected from 184 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: lean production; production management in food supply chains; sustainability and reconfigurability of manufacturing systems; product and asset life cycle management in smart factories of industry 4.0; variety and complexity management in the era of industry 4.0; participatory methods for supporting the career choices in industrial engineering and management education; blockchain in supply chain management; designing and delivering smart services in the digital age; operations management in engineer-to-order manufacturing; the operator 4.0 and the Internet of Things, services and people; intelligent diagnostics and maintenance solutions for smart manufacturing; smart supply networks; production management theory and methodology; data-driven production management; industry 4.0 implementations; smart factory and IIOT; cyber-physical systems; knowledge management in design and manufacturing; collaborative product development; ICT for collaborative manufacturing; collaborative technoloy; applications of machine learning in production management; and collaborative technology.
Download or read book The Constraints Management Handbook written by III Cox and published by CRC Press. This book was released on 2024-11-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new approach to improving the production of goods and services, Constraints Management (CM), recognizes the powerful role of the constraint (the limiting resource) in determining the output of the entire production system. By learning about and mastering CM concepts, managers can improve their companies' present output and plan for future growth as well.
Download or read book Project Planning and Control Techniques written by United States. Army. Management Engineering Training Activity and published by . This book was released on 1983 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT written by Thomas E. Vollmann and published by McGraw Hill Professional. This book was released on 2004-08-20 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Planning and Control Systems for Supply Chain Management is both the classic field handbook for manufacturing professionals in virtually any industry and the standard preparatory text for APICS certification courses. This essential reference has been totally revised and updated to give professionals the knowledge they need.
Download or read book Production and Manufacturing System Management Coordination Approaches and Multi Site Planning written by Renna, Paolo and published by IGI Global. This book was released on 2012-09-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents relevant theoretical frameworks and most recent research findings in this area, providing significant theories for research students and scholars to carry out their continuous research as well as practitioners who aim to improve upon their understanding of distributed production planning"--
Download or read book Practical E Manufacturing and Supply Chain Management written by Gerhard Greeff and published by Elsevier. This book was released on 2004-08-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are revolutionising the way manufacturing and supply chain management are implemented. These changes are delivering manufacturing firms the competitive advantage of a highly flexible and responsive supply chain and manufacturing system to ensure that they meet the high expectations of their customers, who, in today's economy, demand absolutely the best service, price, delivery time and product quality.To make e-manufacturing and supply chain technologies effective, integration is needed between various, often disparate systems. To understand why this is such an issue, one needs to understand what the different systems or system components do, their objectives, their specific focus areas and how they interact with other systems. It is also required to understand how these systems evolved to their current state, as the concepts used during the early development of systems and technology tend to remain in place throughout the life-cycle of the systems/technology. This book explores various standards, concepts and techniques used over the years to model systems and hierarchies in order to understand where they fit into the organization and supply chain. It looks at the specific system components and the ways in which they can be designed and graphically depicted for easy understanding by both information technology (IT) and non-IT personnel.Without a good implementation philosophy, very few systems add any real benefit to an organization, and for this reason the ways in which systems are implemented and installation projects managed are also explored and recommendations are made as to possible methods that have proven successful in the past. The human factor and how that impacts on system success are also addressed, as is the motivation for system investment and subsequent benefit measurement processes.Finally, the vendor/user supply/demand within the e-manufacturing domain is explored and a method is put forward that enables the reduction of vendor bias during the vendor selection process.The objective of this book is to provide the reader with a good understanding regarding the four critical factors (business/physical processes, systems supporting the processes, company personnel and company/personal performance measures) that influence the success of any e-manufacturing implementation, and the synchronization required between these factors.· Discover how to implement the flexible and responsive supply chain and manufacturing execution systems required for competitive and customer-focused manufacturing· Build a working knowledge of the latest plant automation, manufacturing execution systems (MES) and supply chain management (SCM) design techniques· Gain a fuller understanding of the four critical factors (business and physical processes, systems supporting the processes, company personnel, performance measurement) that influence the success of any e-manufacturing implementation, and how to evaluate and optimize all four factors
Download or read book Production Planning with Capacitated Resources and Congestion written by Hubert Missbauer and published by Springer Nature. This book was released on 2020-02-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.
Download or read book Production Planning and Control written by D.R. Kiran and published by Butterworth-Heinemann. This book was released on 2019-06-18 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study. - Uses practical examples from the industry to clearly illustrate the concepts presented - Provides a basic overview of statistics to accompany the introduction to forecasting - Covers the relevance of PP&C to key emerging themes in manufacturing technology, including the Industrial Internet of Things and Industry 4
Download or read book Advances in Production Management Systems written by E. Eloranta and published by Elsevier. This book was released on 2012-12-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.
Download or read book Inventory Management written by John W. Toomey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Inventory Management will be to explain the dynamics of inventory management's principles, concepts, and techniques as they relate to the entire supply chain (customer demand, distribution, and product transformation processes). The interrelationships of all functions will be defined. The book concentrates on understanding the many ramifications of inventory management. In today's competitive business environment, inventory management has proven to be most critical, and this book is directed to the management of inventory to assist in better understanding the body of knowledge required to operate in a competitive world. Almost all functions such as sales, engineering, and accounting have an impact and are impacted by inventory management. The book will assist in the training of students as well as APICS CPIM (Certified in Production and Inventory Management) candidates. As such it will not only be a textbook, but also a desk reference for those employees responsible for controlling inventories, and thereby assist in reducing cost, improving customer service, and maximizing capacity. Each chapter concludes with a case study and suggested solution. The case studies tell the story of a growing company, Smith Industries, and the related inventory management problems it had to address. The problems addressed relate to the subject matter of the chapter.
Download or read book ENTERPRISE RESOURCE PLANNING written by VINOD KUMAR GARG and published by PHI Learning Pvt. Ltd.. This book was released on 2003-01-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Resource Planning (ERP), one of the fastest growing segments in Information Technology today, enables organizations to respond quickly to the ever increasing customer needs and to capitalize on market opportunities. This revised edition continues to throw light on the significance of Business Engineering and its link with Information Technology. Besides, it discusses the role of consultants, vendors and users, the process of customization, as well as the methodology and guidelines for ERP implementation. Intended for the discerning chief executives, functional managers, MIS managers and students of management courses, the book should also serve as a complete reference for understanding the concepts of ERP and enable organizations to implement ERP solutions. HIGHLIGHTS OF THE SECOND EDITION Focusses on Indian ERP packages, with a new section on "Example of an Indian ERP Package". Provides Answers at the end of the book to most of the problems given at the end of each chapter for the benefit of both the students and the teachers.
Download or read book The 123s of ABC in SAP written by Dawn J. Sedgley and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporate the Benefits of Activity-Based Costing into the Efficiencies of Your SAP R/3 System Given SAP's dominance in the enterprise resource planning (ERP) market, many companies and their managers encounter SAP AG applications in some form or another. Many of these organizations have recognized the value of utilizing Activity-Based Costing/Management concepts to perform more accurate cost assignments or drive performance initiatives. Managers are then faced with trying to determine how Activity-Based Costing can be incorporated into the SAP environment. The 123s of ABC in SAP is the first book of its kind designed to help business managers understand the capabilities of the SAP R/3 business application to support Activity-Based Costing, Management, and Budgeting. Divided into three parts-the conceptual foundation, the capabilities of SAP ABC, and integration with other tools-the book provides readers with the following: * An explanation of how Activity-Based Costing can be used with SAP * Helpful hints for implementing ABC into SAP * Insights into the most common difficulties and potential solutions when implementing ABC into SAP * Summary tables that highlight key decisions to be made, implementation hints, and organizational challenges * Detailed descriptions of SAP software applications to support the Activity-Based Costing approach as well as the integration of SAP R/3 with Oros software * Examples of the tandem usage of Resource Consumption Accounting with Activity-Based Costing
Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.
Download or read book Supply Chain Management and Knowledge Management written by A. Dwivedi and published by Springer. This book was released on 2008-11-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in IT have transformed the way organizations interact with each other. To enable organizations to respond to this change, new management paradigms have evolved. This text looks at the value of knowledge management in supply chain management and how supply chain partners can use IT to improve organizational performance.
Download or read book Manufacturing Technologies for Machines of the Future written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date view of manufacturing technologies. Written by leading experts from the USA, Europe, and Asia, both handbook and CD-ROM cover a wide range of topics ranging from industrial management and organization to automation and control, from mechanical to electronical technology, and from machine tools to the consumer goods industry. It gives a unique interdisciplinary and global presentation of material and combines, for the first time, theoretical and significant practical results from the last decades of the most important branches of machine building. Its broad coverage appeals to the highly skilled scientific expert as well as the experienced design engineer, and to undergraduate and advanced students.
