Download or read book Production of Manganese Ferroalloys written by Sverre E. Olsen and published by Tapir Academic Press. This book was released on 2007 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in our knowledge of thermodynamics and physico-chemical factors in manganese ferroalloy production has developed rapidly during the past twenty-five years or so. The authors' intention has been to use this basic knowledge in discussions of industrial manganese ferroalloy production. The book presents the principles and current knowledge of processes in the production of high carbon ferromanganese, silicomanganese and low carbon manganese alloys. The book is intended for professionals working in production, plant design or development. It will also be useful for researchers in industry, universities and research institutes. The book can be used as a textbook for courses in extractive and process metallurgy, and for company in-house courses. Thermodynamics of the slag and metal systems are extensively covered. Computational modelling based on assessed thermochemical databases has made it possible to calculate and present a large number of phase and equilibrium diagrams. These diagrams are useful for easy understanding and analysis of the complex heterogeneous equilibria in the manganese ferroalloy metallurgy. The manganese ferroalloys are mainly produced in electric submerged arc furnaces. Electrical relations are briefly discussed. Supply of raw materials, especially manganese ores and coke, is extremely important for the manganese industry. The book gives the reader appropriate knowledge regarding the selection the best of available raw materials. Environmental issues, including greenhouse gas emissions and climate changes, are of growing concern to ferroalloy producers. Carbon will always be needed as a reducing agent, and consequently emission of CO2 gas is inevitable. The book describes solutions to dealing with pollution problems and gives the latest guidelines for greenhouse gas inventories.
Download or read book Handbook of Ferroalloys written by Michael Gasik and published by Butterworth-Heinemann. This book was released on 2013-05-04 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gathers, reviews and concisely presents the core principles and varied technology involved in processing ferroalloys. Background content in thermodynamics, kinetics, heat and mass transfer is accompanied by an overview of electrical furnaces theory and practice as well as sustainability issues. The work includes detailed coverage of the major technologies of ferrosilicon, ferronickel, ferromolybdenum, ferrotungsten, ferrovanadium, ferromanganese and lesser known minor ferroalloys. Distilling the results of many years' experience in ferroalloys, Michael Gasik has assembled contributions from the worlds' foremost experts. The work is therefore a unique source for scientists, engineers and university students, exploring in depth an area which is one of the most versatile and increasingly used fields within modern metallurgy. - All-in-one source for the major ferroalloys and their metallurgical processing technologies, cutting research time otherwise spent digging through old handbooks or review articles. - In-depth discussion of the C, Si, Al-reduction, groups II-VIII of the periodic table, supporting analysis of metallurgical processing. - Contemporary coverage includes environment and energy saving issues.
Download or read book Ferroalloys written by Mikhail Gasik and published by Springer Nature. This book was released on 2020-09-23 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the physical and chemical foundations of high-temperature processes for producing silicon, manganese and chromium ferroalloys, alloys of molybdenum, vanadium, titanium, alkaline earth and rare earth metals, niobium, zirconium, aluminum, boron, nickel, cobalt, phosphorus, selenium and tellurium, iron-carbon alloys by carbon, silicone and aluminothermic methods. The chapters introduce the industrial production technologies of these groups of ferroalloys, the characteristics of charge materials, and the technological parameters of the melting processes. A description of ferroalloy furnaces is given in detail. Topics such as waste recycling, fines agglomeration technologies, and environmental issues are considered.
Download or read book Stiff Extrusion Briquetting in Metallurgy written by Ivan Kurunov and published by Springer. This book was released on 2017-12-20 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how the specifics of Stiff Extrusion influence on the metallurgical properties of Extruded Briquettes. The practical experience of the utilization of Stiff Extrusion in metallurgy obtained so far suggests that this technology can substitute (partially or by 100%) environmentally unfriendly sintering. The authors start reviewing the existing briquetting technologies, providing the reader later on with the specifics of stiff extrusion briquetting technology. Other aspects treated are the applications of extruded briquettes on blast furnace and for the production of manganese ferro alloys. The authors suggest stuff extrusion briquetting technology for direct reduction iron production and list several alternative unconventional applications.
Download or read book Biomass and Carbon Fuels in Metallurgy written by Jaroslav Legemza and published by CRC Press. This book was released on 2019-12-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass and Carbon Fuels in Metallurgy presents contemporary and new insights into the use of carbonaceous (Biomass) fuels in the metallurgical sector. The authors describe application of these fuels in different technological processes to produce pig iron, steel and ferroalloys. Emphasis is placed on biomass and its metallurgical utilization. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties. The use of carbonaceous fuels in the production of various kinds of agglomerates (ferriferous, manganese and metalized) is also covered. Key Features: Provides a comprehensive view of carbonaceous fuels in various metallurgy processes Details experiments conducted on the use of traditional and alternative (biomass) carbonaceous fuels for the production of agglomerates. Demonstrates that the energy potential of biomass can also be successfully used in pyrometallurgical processes Describes applications of biomass-based fuels in different technological processes for the production of pig iron, steel and ferroalloys. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties.
Download or read book Handbook of Ferroalloys written by Lauri Holappa and published by Elsevier Inc. Chapters. This book was released on 2013-05-04 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word ferroalloy refers to an alloy of iron containing a significant proportion of one or more other elements like silicon, manganese, chromium, aluminum, or titanium. The main applications of ferroalloys occur in the steelmaking process. They are added to steel to improve properties like strength, ductility, and fatigue or corrosion resistance. Additionally, ferroalloys can have several other tasks, such as in refining, deoxidation, modification, and control of nonmetallic inclusions and precipitates. The production and role of ferroalloys are briefly introduced, both from a historical perspective and in light of current and future prospects. Examples of production figures, producers, and markets are presented. Recent developments and main drivers in ferroalloys processing, including energy saving, environmental issues, primary and secondary raw materials resources, and development trends in technology, are briefly discussed.
Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.
Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.
Download or read book World Mineral Statistics written by and published by . This book was released on 1987 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Celebrating the Megascale written by Phillip Mackey and published by Springer. This book was released on 2016-12-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains more than 70 papers covering the important topics and issues in metallurgy today including papers as follows: keynote papers covering a tribute to David Robertson, workforce skills needed in the profession going forward, copper smelting, ladle metallurgy, process metallurgy and resource efficiency, new flash iron making technology, ferro-alloy electric furnace smelting and on the role of bubbles in metallurgical processing operations. Topics covered in detail in this volume include ferro-alloys, non-ferrous metallurgy, iron and steel, modeling, education, and fundamentals.
Download or read book Waste Production and Utilization in the Metal Extraction Industry written by Sehliselo Ndlovu and published by CRC Press. This book was released on 2017-06-27 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.
Download or read book 11th International Symposium on High Temperature Metallurgical Processing written by Zhiwei Peng and published by Springer Nature. This book was released on 2020-01-23 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for this growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals; extraction of metals; preparation of refractory and ceramic materials; sintering and synthesis of fine particles; treatment and recycling of slag and wastes; and saving of energy and protection of environment. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world.
Download or read book STEEL MAKING written by A. K. CHAKRABARTI and published by PHI Learning Pvt. Ltd.. This book was released on 2006-12-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel Making is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. The book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject. Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to : • elaborate the physicochemical principles involved in steel making • explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process) • provide a summary of the developments in secondary refining of steels • discuss principles and practices of ingot casting and continuous casting of steels • emphasize an increasing need to protect our environment and utilize waste energy • explain transport processes, simulation, and modelling relevant to the developments in steel technology. The book provides considerable information in an easily assimilable form and makes an ideal introduction to the complex subject of steel technology.
Download or read book Biotechnology of Metals written by K.A. Natarajan and published by Elsevier. This book was released on 2018-06-13 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology of Metals: Principles, Recovery Methods and Environmental Concerns deals with all aspects of metal biotechnology in different areas, such as biogenesis, biomaterials, biomimetic strategies, biohydrometallurgy, mineral biobeneficiation, electrobioleaching, microbial corrosion, human implants, concrete biocorrosion, microbiology of environment pollution, and bioremediation. As the technology of this interdisciplinary science has diversified over the last five years, this book provides a valuable source for scientists and students in a number of disciplines, including geology, chemistry, metallurgy, microbiology, chemical engineering, environment, civil engineering, and biomedical engineering. - Offers comprehensive coverage of an interdisciplinary subject - Outlines the role of microbiology and biotechnology in mining, metallurgy, waste disposal and environmental control - Covers new topics, such as biogenesis, biomaterials processing, the role of micro-organisms in causing corrosion, and much more - Presents scientifically illustrated experimental research methods in metals biotechnology
Download or read book Deep Sea Mining written by Rahul Sharma and published by Springer. This book was released on 2017-03-28 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book contains contributions from specialists who provide a complete status update along with outstanding issues encompassing different topics related to deep-sea mining. Interest in exploration and exploitation of deep-sea minerals is seeing a revival due to diminishing grades and increasing costs of processing of terrestrial minerals as well as availability of several strategic metals in seabed mineral resources; it therefore becomes imperative to take stock of various issues related to deep-sea mining. The authors are experienced scientists and engineers from around the globe developing advanced technologies for mining and metallurgical extraction as well as performing deep sea exploration for several decades. They invite readers to learn about the resource potential of different deep-sea minerals, design considerations and development of mining systems, and the potential environmental impacts of mining in international waters.
Download or read book Operations and Basic Processes in Steelmaking written by Luis Felipe Verdeja González and published by Springer. This book was released on 2021-04-20 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.
