Download or read book Ceramic Injection Molding written by B.C. Mutsuddy and published by Springer Science & Business Media. This book was released on 1994-11-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the steps involved in the ceramic injection molding process. It provides the reader with a convenient and authoritative source of information and guidance on the use of materials, equipment and testing procedures to produce satisfactory ceramic products.
Download or read book Production of Ceramics by the Injection Molding Process written by Basil Richard Marple and published by . This book was released on 1992 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Molding of Metals and Ceramics written by Randall M. German and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Critical Issues for Injection Molding written by Jian Wang and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is composed of different chapters which are related to the subject of injection molding and written by leading international academic experts in the field. It contains introduction on polymer PVT measurements and two main application areas of polymer PVT data in injection molding, optimization for injection molding process, Powder Injection Molding which comprises Ceramic Injection Molding and Metal Injection Molding, ans some special techniques or applications in injection molding. It provides some clear presentation of injection molding process and equipment to direct people in plastics manufacturing to solve problems and avoid costly errors. With useful, fundamental information for knowing and optimizing the injection molding operation, the readers could gain some working knowledge of the injection molding.
Download or read book Powder Injection Molding written by Randall M. German and published by . This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Processing written by R.A. Terpstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Processing is the first comprehensive, stand alone, multi-authored book on advanced ceramic processing. It provides an overview of the important processing steps involved in the fabrication of advanced ceramics for structural and functional applications.
Download or read book Microengineering of Metals and Ceramics Part I written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step by step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.
Download or read book The Effects of Process Parameters on Injection molded PZT Ceramics Part Fabrication Compounding Process Rheology written by Lisa Ann Mondy and published by . This book was released on 2005 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid solutions of lead-based perovskites are the backbone materials of the piezoelectric components for transducer, actuator, and resonator applications. These components, typically small in size, are fabricated from large sintered ceramic slugs using grinding and lapping processes. These operations increase manufacturing costs and produce a large hazardous waste stream, especially when component size decreases. To reduce costs and hazardous wastes associated with the production of these components, an injection molding technique is being investigated to replace the machining processes. The first step in the new technique is to compound an organic carrier with a ceramic powder. The organic carrier is a thermoplastic based system composed of a main carrier, a binder, and a surfactant. Understanding the rheology of the compounded material is necessary to minimize the creation of defects such as voids or cavities during the injection-molding process. An experiment was performed to model the effects of changes in the composition and processing of the material on the rheological behavior. Factors studied included: the surfactant of the organic carrier system, the solid loading of the compounded material, and compounding time. The effects of these factors on the viscosity of the material were investigated.
Download or read book Advanced Processing and Manufacturing Technologiesfor Structural and Multifunctional Materials VI Volume 33 Issue 8 written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2012-11-28 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies.
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting Details commercially available hot embossing machinery and components like tools and mold inserts
Download or read book The Production of Advanced Ceramics by Injection Molding written by William J. Corbett and published by . This book was released on 1987 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Materials and Components for Engines written by Jürgen G. Heinrich and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.
Download or read book Extrusion in Ceramics written by Frank Händle and published by Springer Science & Business Media. This book was released on 2009-08-12 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank Handle ̈ 1.1 What to Expect For some time now, I have been toying around with the idea of writing a book about “Ceramic Extrusion”, because to my amazement I have been unable to locate a single existing, comprehensive rundown on the subject – much in contrast to, say, plastic extrusion and despite the fact that there are some outstanding contributions to be found about certain, individual topics, such as those in textbooks by Reed [1], Krause [2], Bender/Handle ̈ [3] et al. By way of analogy to Woody Allen’s wonderfully ironic movie entitled “Eve- thing You Always Wanted to Know about Sex”, I originally intended to call this book “Everything You Always Wanted to Know about Ceramic Extrusion”, but - ter giving it some extra thought, I eventually decided on a somewhat soberer title. Nevertheless, my companion writers and I have done our best – considering our target group and their motives – not to revert to the kind of jargon that people use when they think the less understandable it sounds, the more scienti c it appears. This book addresses all those who are looking for a lot or a little general or selective information about ceramic extrusion and its sundry aspects. We realize that most of our readers will not be perusing this book just for fun or out of intellectual curiosity, but because they hope to get some use out of it for their own endeavours.
Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.
Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book Handbook of Metal Injection Molding written by Donald F Heaney and published by Woodhead Publishing. This book was released on 2018-11-01 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques, as well as automation of the MIM process and metal injection molding of large components. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys, carbon steels, precious metals, and aluminum. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. Provides an authoritative guide to metal injection molding and its applications Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering Comprehensively examines quality issues such as feedstock characterization, modeling and simulation, common defects and carbon content control
Download or read book 4M 2006 Second International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2006-09-15 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2006 - Second International Conference on Multi-Material Micro Manufacture covers the latest state-of-the-art research results from leading European researchers in advanced micro technologies for batch processing of metals, polymers, and ceramics, and the development of new production platforms for micro systems-based products. These contributions are from leading authors at a platform endorsed and funded by the European Union R&D community, as well as leading universities, and independent research and corporate organizations. Contains authoritative papers that reflect the latest developments in micro technologies and micro systems-based products
