Download or read book Production of Aluminum Silicon Carbide Composites Using Powder Metallurgy at Sintering Temperatures Above the Aluminum Melting Point written by W. M. Khairaldien and published by . This book was released on 2007 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extensive utilization of aluminum reinforced with silicon carbide in different structural applications has motivated the need to find a cost effective technological production method for these composites. Homogeneity, machinability, and interfacial reaction of the constituents represent the significant problems pertaining to these composites. Production of a homogenous, high strength, and net-shape structural components made from aluminum-silicon carbide composites can be achieved using powder metallurgy (PM) technology. In the present work the problem of low strength of the aluminum-silicon carbide produced by powder metallurgy is solved by raising the sintering temperature of the composite above the melting temperature of the aluminum. This method produces a local fusing and welding of the aluminum particles. Using aluminum powder with a thick oxide layer surrounding the particles prevents the total melting of the composite. Green compacted specimens containing 0, 5, 10, 15, 20, 25, and 30 wt % silicon carbide were prepared. Samples from each composition were sintered at 650, 700, 750, 800, 850, and 900°C separately, while other specimens were left without sintering for comparison. Microstructure examination, a microhardness test, and a compression test were carried out for each of the 49 combinations of SiC contents and sintering temperatures to study the effect of sintering temperature and SiC contents on the composite properties and to detect the optimum sintering temperature for each SiC weight percent. Generally the results show the tendency for both strength and ductility to increase upon increase in the sintering temperature. These specific sintering temperature levels are found to be 650°C for the aluminum with no silicon carbide content, 700°C for composites containing both 5 and 10 wt % SiC, 750°C for composites containing 15 wt % SiC, 800°C for composites containing 20 wt % SiC, 850°C for composites containing 25 wt % SiC, and 900°C for composites containing 30 wt % SiC.
Download or read book Advanced Engineering Materials and Modeling written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-08-05 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering of materials with advanced features is driving the research towards the design of innovative materials with high performances. New materials often deliver the best solution for structural applications, precisely contributing towards the finest combination of mechanical properties and low weight. The mimicking of nature's principles lead to a new class of structural materials including biomimetic composites, natural hierarchical materials and smart materials. Meanwhile, computational modeling approaches are the valuable tools complementary to experimental techniques and provide significant information at the microscopic level and explain the properties of materials and their very existence. The modeling also provides useful insights to possible strategies to design and fabricate materials with novel and improved properties. The book brings together these two fascinating areas and offers a comprehensive view of cutting-edge research on materials interfaces and technologies the engineering materials. The topics covered in this book are divided into 2 parts: Engineering of Materials, Characterizations & Applications and Computational Modeling of Materials. The chapters include the following: Mechanical and resistance behavior of structural glass beams Nanocrystalline metal carbides - microstructure characterization SMA-reinforced laminated glass panel Sustainable sugarcane bagasse cellulose for papermaking Electrospun scaffolds for cardiac tissue engineering Bio-inspired composites Density functional theory for studying extended systems First principles based approaches for modeling materials Computer aided materials design Computational materials for stochastic electromagnets Computational methods for thermal analysis of heterogeneous materials Modelling of resistive bilayer structures Modeling tunneling of superluminal photons through Brain Microtubules Computer aided surgical workflow modeling Displaced multiwavelets and splitting algorithms
Download or read book Processing and Properties of Advanced Ceramics and Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2009-05-20 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable reference for those interested in innovative approaches to the synthesis and processing of ceramics and composites, as well as their properties. Twenty-two papers describing the latest developments in the areas of combustion synthesis, microwave processing, reaction forming, polymer processing, chemical vapor deposition, electrophoresis, spark plasma sintering, mechanical amorphization, thin films, composites, and more are included in this volume.
Download or read book International Journal of Powder Metallurgy written by and published by . This book was released on 2004 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent Office written by United States. Patent Office and published by . This book was released on 1974 with total page 1688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book World Aluminum Abstracts written by and published by . This book was released on 1972 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Design Manufacturing and Applications of Composites Tenth Workshop 2014 written by Reza Vaziri and published by DEStech Publications, Inc. This book was released on 2015-03-04 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: New strategies on fillers, reinforcements, process modeling and SHM Discusses carbon fiber, ceramic, metal, and wood compositesApplications to wind turbines, aerospace, piping The tenth in an ongoing series, this large volume contains 44 papers published for the first time on the behavior, process modeling and testing of composites, written by well-known researchers from universities and research centers in Japan and Canada. Special attention is given to advances in reinforcements, manufacturing, and sensing methods for SHM of composite processes and damage. Key words include: braided composites, nanotube, graphene nanoplatelet, moisture effects, structural health, functionally graded shells, curvilinear composite, lignin, sensors, piezoelectric, and damage sensing.
Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.
Download or read book Powder Technology of Aluminum Silicon Carbide Composites written by CSA Journal Division and published by . This book was released on 2002* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Applied Thermal Design written by Eric C. Guyer and published by CRC Press. This book was released on 1999-02-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a foundation to the four principle facets of thermal design: heat transfer analysis, materials performance, heating and cooling technology, and instrumentation and control. The focus is on providing practical thermal design and development guidance across the spectrum of problem analysis, material applications, equipment specification, and sensor and control selection.
Download or read book Encyclopedia and Handbook of Materials Parts and Finishes written by Mel Schwartz and published by CRC Press. This book was released on 2016-07-06 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great deal of progress has been made in the development of materials, their application to structures, and their adaptation to a variety of systems and integrated across a wide range of industrial applications. This encyclopedia serves the rapidly expanding demand for information on technological developments. In addition to providing information
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1999-04 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Implementations of Additive Manufacturing Technologies written by Shashanka Rajendrachari and published by Springer Nature. This book was released on 2023-09-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives in-depth information about evolution of additive manufacturing from a few decades to the present explaining how the technology has been improved with time and its practical implementation of the technology in various applications and industries. It describes the different types of additive manufacturing methods used to prepare materials and their advantages, followed by the limitations. This includes the fabrication of metal, polymer, biomaterial, hybrid nanomaterial, smart material, and ceramic materials using additive manufacturing methods used in many applications such as 3D printed batteries, supercapacitors, electrochemical sensors, biosensors, aircraft interior components, rocket engines components, automobile components, and medical implants. It also describes advanced applications of additive manufacturing materials in the construction, biomedical, and sports industries. In addition, the book also deep dives into the environmental impact and economic benefits of additive manufacturing industries. A special chapter is included to give an overview on the general type of job opportunities for engineering graduates and research scholars seeking to find employment in additive manufacturing companies. In short, the content of this book targets primarily researchers, engineering students (bachelors and masters), and industrial engineers.
Download or read book 24th Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 21 Issue 3 written by Todd Jessen and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Principles and Applications of Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-15 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated Second Edition provides the reader with the solid understanding of tribology which is essential to engineers involved in the design of, and ensuring the reliability of, machine parts and systems. It moves from basic theory to practice, examining tribology from the integrated viewpoint of mechanical engineering, mechanics, and materials science. It offers detailed coverage of the mechanisms of material wear, friction, and all of the major lubrication techniques - liquids, solids, and gases - and examines a wide range of both traditional and state-of-the-art applications. For this edition, the author has included updates on friction, wear and lubrication, as well as completely revised material including the latest breakthroughs in tribology at the nano- and micro- level and a revised introduction to nanotechnology. Also included is a new chapter on the emerging field of green tribology and biomimetics.
