Download or read book Production et caract risation des charbons actifs partir du bois et autres d chets v g taux written by Lotfi Khezami and published by . This book was released on 2005 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Des analyses thermogravimétriques de la décomposition thermique de la cellulose ont été réalisées. Un modèle cinétique de type Prout-Tomkins est adapté à la pyrolyse de la cellulose. L'énergie d'activation correspondante à la cellulose, la lignine et le xylane a été identifiée en mode dynamique. Le charbon actif produit à partir du bois et de ses principaux constituants de base a été caractérisé par BET et adsorption en solution aqueuse. Des mesures simultanées d'ATD et d'ATG ont servi à comparer les thermicités et les vitesses de décomposition de ces différents constituants. La thermocompression a permis de conférer au bois une densité deux fois supérieure à celle du bois brut. L'activation chimique a permis d'obtenir des surfaces spécifiques élevées ainsi que de bonnes capacités d'adsorption. Des mesures de capacité d'adsorption d'ions métalliques donnent des résultats importants. Une loi cinétique pseudo ordre 2 simule correctement l'adsorption de Cr(VI) en solution.
Download or read book Etude de la carbonisation et de l activation de pr curseurs v g taux durs et mous written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Ce travail a été réalisé dans le département de Chimie-Physique de l'Université de Neuchâtel. Ce groupe de recherche est dirigé depuis 1971 par le Professeur F. Stoeckli. Le projet commun de recherche du groupe peut être défini comme l'étude de l'adsorption physique des différentes surfaces solides et le traitement et description de l'adsorption par la théorie de Dubinin. Dans ce cadre le travail ici présenté complémente d'une façon explicite la fabrication et caractérisation d'un type de solides poreux hautement utilisés comme le sont les charbons actifs. Brièvement un charbon actif est un matériel solide résistant aux hautes températures avec une capacité d'adsorption qui est définie par le volume poreux et les groupes fonctionnels, principalement oxygénés, qui se trouvent à la surface. Les applications principales du charbon actif sont entre autres la purification, décoloration, désodorisation et en général la désintoxication des eaux potables ainsi que la purification de l'air et des produits chimiques, alimentaires & tc. A l'heure actuelle la demande croissante de matériaux adsorbants pour des procédés de protection de l'environnement suscite une recherche complémentaire dans la fabrication des charbons actifs à partir de matières qui ne sont pas classiques, concrètement à partir des déchets végétaux. Elaborer des charbons actifs à partir des déchets végétaux est pourtant très intéressant du point de vue économique car nous profitons, à partir de transformations simples, d'une application directe de ces matériaux de départ. On a donc trouvé intéressant de montrer comment se déroule la transition d'un matériau végétal à un charbon actif. Dans ce contexte nous pouvons définir comme objectifs principaux de ce travail : Ce travail montre une différentiation du matériau végétal à partir de sa composition chimique ainsi que l'obtention de la surface poreuse optimal dans les conditions de production utilisées.
Download or read book Advances in Solid State Fermentation written by S. Roussos and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: G.HAINNAUX Departement Milieu et Activites Agricoles, Centre ORSTOM, 911 Avenue d' Agropolis, B.P. 5045, 34032 Montpellier Cedex , France. Solid state fermentation, popularly abbreviated as SSF, is currently investigated by many groups throughout the world. The study of this technique was largely neglected in the past in European and Western countries and there is now a high demand for SSF, meaning in food, environment, agricultural, phannaceutical and many other biotechnological applications. It gives me satisfaction to note that the importance of this technique was realised at my department way back in 1975 since then, our team has put concentrated efforts on developing this technique. xvii Foreword Advances in Solid State Fermentation Foreword M. PUYGRENIER Agropolis Valorisation, Avenue d' Agropolis, 34394 Montpellier Cedex 5, France. On the name of the Scientific Community, I would like to express the wish that this International Symposium on SSF should be successful. Solid State Fermentation is part of biotechnology research. It consists on seeding solid culture medium with bacteria or fungi (filamentous or higher) and on producing, in this medium (solid components and exudates) metabolites and high value products. In fact, this process is very old. In older industries such the food and agricultural, this technique has been extensively used. An example of this is the production of pork sausages and Roquefort cheese. Pharmaceutical industry could make extensive use of SSF in the production of secondary metabolites of many kinds and development in this direction is soon expected.
Download or read book Arsenic in Drinking Water written by National Research Council and published by National Academies Press. This book was released on 2001-11-26 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having safe drinking water is important to all Americans. The Environmental Protection Agency's decision in the summer of 2001 to delay implementing a new, more stringent standard for the maximum allowable level for arsenic in drinking water generated a great deal of criticism and controversy. Ultimately at issue were newer data on arsenic beyond those that had been examined in a 1999 National Research Council report. EPA asked the National Research Council for an evaluation of the new data available. The committee's analyses and conclusions are presented in Arsenic in Drinking Water: 2001 Update. New epidemiological studies are critically evaluated, as are new experimental data that provide information on how and at what level arsenic in drinking water can lead to cancer. The report's findings are consistent with those of the 1999 report that found high risks of cancer at the previous federal standard of 50 parts per billion. In fact, the new report concludes that men and women who consume water containing 3 parts per billion of arsenic daily have about a 1 in 1,000 increased risk of developing bladder or lung cancer during their lifetime.
Download or read book Encapsulations written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-05-27 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulations, a volume in the Nanotechnology in the Agri-Food Industry series,presents key elements in establishing food quality through the improvement of food flavor and aroma. The major benefits of nanoencapsulation for food ingredients include improvement in bioavailability of flavor and aroma ingredients, improvement in solubility of poor water-soluble ingredients, higher ingredient retention during production process, higher activity levels of encapsulated ingredients, improved shelf life, and controlled release of flavor and aroma. This volume discusses main nanoencapsulation processes such as spray drying, melt injection, extrusion, coacervation, and emulsification. The materials used in nanoencapsulation include lipids, proteins, carbohydrates, cellulose, gums, and food grade polymers. Applications and benefits of nanoencapsulation such as controlled release, protections, and taste masking will be explained in detail. Includes the most up-to-date information on nanoencapsulation and nanocontainer-based delivery of antimicrobials Presents nanomaterials for innovation based on scientific advancements in the field Provides control release strategies to enhance bioactivity, including methods and techniques for research and innovation Provides useful tools to improve the delivery of bioactive molecules and living cells into foods
Download or read book In Situ Gelling Polymers written by Xian Jun Loh and published by Springer. This book was released on 2014-10-01 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research involving in situ gelling polymers and can be used as a guidebook for academics, industrialists and postgraduates interested in this area. This work summaries the academic contributions from the top authorities in the field and explore the fundamental principles of in situ gelling polymeric networks, along with examples of their major applications. This book aims to provide an up-to-date resource of in situ gelling polymer research.
Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.
Download or read book Advances in Polymer Science written by and published by . This book was released on 1985 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Total Diet Studies written by Gerald G. Moy and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unless a food is grossly contaminated, consumers are unable to detect through sight or smell the presence of low levels of toxic chemicals in their foods. Furthermore, the toxic effects of exposure to low levels of chemicals are often manifested slowly, sometimes for decades, as in the case of cancer or organ failure. As a result, safeguarding food from such hazards requires the constant monitoring of the food supply using sophisticated laboratory analysis. While the food industry bears the primary responsibility for assuring the safety of its products, the overall protection of people’s diets from chemical hazards must be considered one of the most important public health functions of any government. Unfortunately, many countries do not have sufficient capability and capacity to monitor the exposure of their populations to many potentially toxic chemicals that could be present in food and drinking water. Without such monitoring, public health authorities in many countries are not able to identify and respond to problems posed by toxic chemicals, which may harm their population and undermine consumer confidence in the safety of the food supply. From a trade perspective, those countries that cannot demonstrate that the food they produce is free of potentially hazardous chemicals will be greatly disadvantaged or even subject to sanctions in the international marketplace. The goal of a total diet study (TDS) is to provide basic information on the levels and trends of exposure to chemicals in foods as consumed by the population. In other words, foods are processed and prepared as typical for a country before they are analyzed in order to better represent actual dietary intakes. Total diet studies have been used to assess the safe use of agricultural chemicals (e.g., pesticides, antibiotics), food additives (e.g., preservatives, sweetening agents), environmental contaminants (e.g., lead, mercury, arsenic, cadmium, PCBs, dioxins), processing contaminants (e.g., acrylamide, polycyclic aromatic hydrocarbons, chloropropanols), and natural contaminants (e.g., aflatoxin, patulin, other mycotoxins) by determining whether dietary exposure to these chemicals are within acceptable limits. Total diet studies can also be applied to certain nutrients where the goal is to assure intakes are not only below safe upper limits, but also above levels deemed necessary to maintain good health. International and national organizations, such as the World Health Organization, the European Food Safety Agency and the US Food and Drug Administration recognize the TDS approach as one of the most cost-effective means of protecting consumers from chemicals in food, for providing essential information for managing food safety, including food standards, and for setting priorities for further investment and study. Total Diet Studies introduces the TDS concept to a wider audience and presents the various steps in the planning and implementation of a TDS. It illustrates how TDSs are being used to protect public health from chemicals in the food supply in many developed and developing countries. The book also examines some of the applications of TDSs to specific chemicals, including contaminants and nutrients.
Download or read book The Princeton Encyclopedia of Classical Sites written by Richard Stillwell and published by Princeton University Press. This book was released on 2017-03-14 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here are over 1,000 pages of authoritative information on the archaeology of Greek and Roman civilization. The sites discussed in the more than 2,800 entries are scattered from Britain to India and from the shores of the Black Sea to the coast of North Africa and up the Nile. They are located on sixteen area maps, keyed to the entries. The entries were written by 375 scholars from sixteen nations, many of whom have worked at the sites they describe. Until now our knowledge of the Classical period has been scattered in hundreds of sources dating from antiquity to our own times. This volume provides essential information on work accomplished, in progress, and still to be undertaken. Originally published in 1976. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Scientific Canadian Mechanics Magazine and Patent Office Record written by Canada. Patent Office and published by . This book was released on 1966-03 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Bioprocess Engineering written by Enrique Galindo and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess engineering has played a key role in biotechnology, contributing towards bringing the exciting new discoveries of molecular and cellular biology into the applied sphere, and in maintaining established processes, some centuries-old, efficient and essential for today's industry. Novel developments and new application areas of biotechnology, along with increasing constraints in costs, product quality, regulatory and environmental considerations, have placed the biochemical engineer at the forefront of new challenges. This second volume of Advances in Bioprocess Engineering reflects precisely the multidisciplinary nature of the field, where new and traditional areas of application are nurtured by a better understanding of fundamental phenomena and by the utilization of novel techniques and methodologies. The chapters in this book were written by the invited speakers to the 2nd International Symposium on Bioprocess Engineering, Mazatlan, Mexico, September 1997.
Download or read book Solid State Fermentation Bioreactors written by David A. Mitchell and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise professional reference provides a fundamental framework for the design and operation of solid-state fermentation bioreactors, enabling researchers currently working at laboratory scale to scale up their processes. The authors survey bioreactor types in common use, and describe in depth how to plan a project, and model heat transfer phenomena. The book includes case studies, and a review of practical issues involved in bioreactor performance.
Download or read book Urban Water Cycle Processes and Interactions written by Jiri Marsalek and published by CRC Press. This book was released on 2014-04-21 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective management of urban water should be based on a scientific understanding of the impact of human activity on both the urban hydrological cycle - including its processes and interactions - and the environment itself. Such anthropogenic impacts, which vary broadly in time and space, need to be quantified with respect to local climate, urban d
Download or read book Inter Basin Water Transfer written by Fereidoun Ghassemi and published by Cambridge University Press. This book was released on 2007-01-11 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the experiences of large water infrastructure projects involving the transfer of water from basins considered to have surplus water to those where the demand for water has exceeded or is expected to exceed supplies, this book examines case studies within diverse geographical, climatic, economic, and policy regimes.
Download or read book Diamond Based Composites written by Mark A. Prelas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-based composites, with their advantages of hardness, high Young's modulus and the like, have demonstrated new and unusual features, such as stability to high temperatures and pressure shocks and a large internal surface that can be controlled to offer customised electrical, magnetic and optical properties, leading to efficient filters, absorbents, sensors and other tools for environmental control and monitoring. The current book covers the synthesis of materials, their characterization and properties, trends in high pressure and high temperature technologies, low pressure technologies, basic principles of DBC material science, and future developments in electronics, optics, industrial tools and components, biotechnology, and medicine. Wide band-gap materials are considered, ranging from molecular clusters, nanophase materials, growth, processing and synthesis. The processing of composite based materials can be classified into six basic methods: in situ growth, high pressure/high temperature catalytic conversion; mix and sinter (c-BN plus metal-ceramic polymer mix); direct sintering; direct polymorphic conversion; shock detonation; and SHS sintering.
Download or read book Azoles written by Aleksey Kuznetsov and published by BoD – Books on Demand. This book was released on 2021-06-30 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Azoles are a broad and promising class of five-membered heterocyclic compounds containing from one up to five nitrogen atom(s) that can also contain sulfur or oxygen atoms. Widely used as potent antifungal agents, various azole derivatives have also demonstrated many other promising biological properties. This book covers studies of several types of thiazole-based heterocyclic scaffolds, the development of 4-thiazolidinone and thiazole derivatives with heterocyclic fragments as potential candidates for new drugs against trypanosomiasis, numerous synthetic approaches for the synthesis of 1,2,3-triazoles, the application of N-azole, N,S-azole, and N,O-azole as well as their derivatives as retarders of metallic corrosion, and the integration of azoles in materials used for renewable energy processing and applications and wood treatment.
