Download or read book Production Control and Information Systems for Component manufacturing Shops written by J. W. M. Bertrand and published by Elsevier Science & Technology. This book was released on 1981 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book Production control and information systems for component manufacturing shops written by Jan Willem Marie Bertrand and published by . This book was released on 1981 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lean Business Systems and Beyond written by Tomasz Koch and published by Springer. This book was released on 2008-01-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Manufacturing has proved to be one of the most successful and most powerful production business systems over the last decades. Its application enabled many companies to make a big leap towards better utilization of resources and thus provide better service to the customers through faster response, higher quality and lowered costs. Lean is often described as “eyes for flow and eyes for muda” philosophy. It simply means that value is created only when all the resources flow through the system. If the flow is stopped no value but only costs and time are added, which is muda (Jap. waste). Since the philosophy was born at the Toyota many solutions were tailored for the high volume environment. But in turbulent, fast-changing market environment and progressing globalization, customers tend to require more customization, lower volumes and higher variety at much less cost and of better quality. This calls for adaptation of existing lean techniques and exploration of the new waste-free solutions that go far beyond manufacturing. This book brings together the opinions of a number of leading academics and researchers from around the world responding to those emerging needs. They tried to find answer to the question how to move forward from “Spaghetti World” of supply, production, distribution, sales, administration, product development, logistics, accounting, etc. Through individual chapters in this book authors present their views, approaches, concepts and developed tools. The reader will learn the key issues currently being addressed in production management research and practice throughout the world.

Download or read book Engineering Production Control Strategies written by Christoph Karrer and published by Springer Science & Business Media. This book was released on 2012-02-23 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identifying and customizing suitable control strategies is a challenging task, especially when production systems have to cope with variable demands, forecast error, and unstable processes. The focus of this book lies on helping companies with complex and discrete production systems to tailor a production control strategy to their needs. Thereby, the mutual merits of “push” and “pull” systems are taken into account, leading to hybrid strategies. Consequently, the book addresses practitioners who are interested in looking behind the scenes and into the physics of production control. A real-life case study demonstrates the practical applicability of the presented framework.

Download or read book New Trends in Software Methodologies Tools and Techniques written by A. Selamat and published by IOS Press. This book was released on 2014-08-29 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software is the essential enabling means for science and the new economy. It helps us to create a more reliable, flexible and robust society. But software often falls short of our expectations. Current methodologies, tools, and techniques remain expensive and are not yet sufficiently reliable, while many promising approaches have proved to be no more than case-by-case oriented methods. This book contains extensively reviewed papers from the thirteenth International Conference on New Trends in software Methodology, Tools and Techniques (SoMeT_14), held in Langkawi, Malaysia, in September 2014. The conference provides an opportunity for scholars from the international research community to discuss and share research experiences of new software methodologies and techniques, and the contributions presented here address issues ranging from research practices and techniques and methodologies to proposing and reporting solutions for global world business. The emphasis has been on human-centric software methodologies, end-user development techniques and emotional reasoning, for an optimally harmonized performance between the design tool and the user. Topics covered include the handling of cognitive issues in software development to adapt it to the user's mental state and intelligent software design in software utilizing new aspects on conceptual ontology and semantics reflected on knowledge base system models. This book provides an opportunity for the software science community to show where we are today and where the future may take us.

Download or read book Computer Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Download or read book Capacity Oriented Analysis and Design of Production Systems written by M.B.M. de Koster and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: In production systems there are often capacity oriented performance objectives, like a desired total throughput, a desired average throughput time and average work in-process. Such performance objectives are expressed in "units of products" rather than in specific product types. This book presents a way of modeling and analyzing production systems so, that such capacity oriented performance criteria can be measured in a simple way. The model consists of three basic elements. 1. The product types in the system are aggregated. 2. The product flow is modeled as being continuous. 3. The machines in the model have a finite number of states. Each state has a phase-type sojourn distribution and an associated production speed. Transitions between the states are determined by an irreducible Markov transition matrix. In the book both the mathematical properties and the practical applicabilities of the model are investigated. The model is extensively analyzed for various layouts, like flow lines, assembly disassembly systems and networks where parallel machines share common buffers. Furthermore various ways of controlling the product flow in the model are investigated, such as Base Stock Control, Workload Control, control by finite buffers and control by the Reorder Point System. An approximation technique is developed for a quick estimation of performance measures like throughput and average work-in-process, for networks with layouts and control techniques like those above-mentioned.

Download or read book Handbook of Manufacturing Control written by Hermann Lödding and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unternehmen mit kurzen Lieferzeiten, hoher Liefertreue und niedrigen Beständen wachsen schnell und erzielen hohe Gewinne. Wie Unternehmen diese logistische Herausforderung meistern können, zeigt das Buch anhand von aktuellen Forschungsergebnissen der Leibniz Universität Hannover. Der Band gibt einen umfassenden Überblick über die Aufgaben und Verfahren der Fertigungssteuerung und befähigt Leser dazu, Schwächen in diesem Bereich zu erkennen und zu korrigieren. Ein fundiertes Nachschlagewerk für Studierende, Dozenten, Ingenieure und Wissenschaftler.

Download or read book Production Planning with Capacitated Resources and Congestion written by Hubert Missbauer and published by Springer Nature. This book was released on 2020-02-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.

Download or read book Machine Learning Optimization and Data Science written by Giuseppe Nicosia and published by Springer. This book was released on 2019-02-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the post-conference proceedings of the 4th International Conference on Machine Learning, Optimization, and Data Science, LOD 2018, held in Volterra, Italy, in September 2018.The 46 full papers presented were carefully reviewed and selected from 126 submissions. The papers cover topics in the field of machine learning, artificial intelligence, reinforcement learning, computational optimization and data science presenting a substantial array of ideas, technologies, algorithms, methods and applications.

Download or read book Efficiency of Manufacturing Systems written by B. Wilson and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Research Institute (A.R. 1.) on "the efficiency of Manufacturing Systems" was held under the auspices of the NATO Special Programm~ Panel on Systems Science as a part of the NATO Science Committee's continuous effort to promote the advancement of science through international co-operation. Advanced Research Institutes are organised for the purpose of bringing together experts in a particular field of interest to identify and make known the present state of knowledge in that area and, through informed debate, to make recommendations for directions for future research that would benefit the community at large. To this end two kinds of contribution were obtained by invitation. There were those papers which were about the current state of work in the area of manufacturing systems and its organisation; in addition three theme papers were presented to provide a stimulus to the discussion in terms of ways of thinking, both about the area and about the kind of research needed.

Download or read book Emerging Optimization Techniques In Production Planning Control written by Onwubolu Godfrey C and published by World Scientific. This book was released on 2002-05-20 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a concept of adaptive memory programming (AMP) for grouping a number of generic optimization techniques used in combinatorial problems. The same common features seen in the use of memory and a local search procedure drive these emerging optimization techniques, which include artificial neural networks, genetic algorithms, tabu search and ant systems. The primary motivation for AMP, therefore, is to group and unify all these techniques so as to enhance the computational capabilities that they offer for combinatorial problems encountered in real life in the area of production planning and control.The text describes the theoretical aspects of AMP together with relevant production planning and control applications. It covers the techniques, applications and algorithms. The book has been written in such a way that it can serve as an instructional text for students and those who are taking tuition on their own. The numerical examples given are first solved manually to enhance the reader's understanding of the material, and that is followed by a description of the algorithms and computer results. This way, the student can fully follow the material. The algorithms described for each application are useful to both students and practitioners in grasping how to implement similar applications in computer code using emerging optimization techniques.

Download or read book Research Methods for Operations and Supply Chain Management written by Christer Karlsson and published by Taylor & Francis. This book was released on 2023-11-15 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods for Operations and Supply Chain Management, third edition, is a toolkit of research approaches primarily for advanced students and beginner researchers, but also a reference book for any researcher in operations and supply chain management (OSCM). Many students begin their careers in research limited by the one or few approaches taken by their department. The concise, accessible overviews found here equip them with an understanding of a variety of methods and how to use them, enabling students to tailor their research project to their own strengths and goals. The more seasoned researcher will find comprehensive descriptions and analyses on a wide variety of research approaches. This updated and enhanced edition responds to the latest developments in OSCM, including the growing prominence of services and production of intangible products, the complete supply chain, and the increasing use of secondary data and of mixed approaches. Alternative research approaches are included and explored to help with the planning of research. This edition also includes expanded literature reviews and analysis to guide students towards the next steps in their reading, and more detailed step-by-step advice to tie theory with the research. Including contributions from an impressive range of the field’s leading thinkers in OSCM research, this is a guide that no one embarking on an OSCM research project should be without. Previous editions of this book were published under the title Research Methods for Operations Management and Researching Operations Management.

Download or read book Management Quality and Economics in Building written by A. Bezelga and published by Routledge. This book was released on 2006-03-09 with total page 1798 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1991. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Researching Operations Management written by Christer Karlsson and published by Routledge. This book was released on 2010-03-17 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researching Operations Management fills the growing need for a comprehensive textbook and reference on doing quality research in the field of Operations Management (OM). It addresses the particular problem—especially for advanced students and beginning researchers—that many academic departments specialize in just one or a few approaches to research. As a result many students and researchers are not exposed to the breadth of possible research approaches in OM. Providing a concise overview of each of the most important research approaches in the field, the book enables researchers and students to understand and practice these methods, thus giving them a platform for choosing appropriate and complementary approaches to their research. With contributions from an international group of leading thinkers in the OM research field, the book covers those methods frequently used in studies of OM as well as adjacent applied management areas such as management of innovation and R&D, logistics, and supply chain management. Included are chapters on surveys, case studies, action research, longitudinal field studies, and models and simulations together with chapters on planning, positioning, assessing, and publishing research. In addition, the contributors also consider ethical and cultural issues in researching operations management.

Download or read book The Capacity Aspect of Inventories written by Roland Bemelmans and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the production in an industrial organisation is very complex. There are two different reasons for this complexity. On the one hand, complexity is due to the variety in range and in level of detail of the activities that playa role in such a control (think of manufacturing process development, capacity planning, coordinating the flow of material through the production process, releasing of workorders, and scheduling). On the other hand, the production process itself may be complex (many products, many stages, complex interrelationships between resources, and uncertainty in the availability of resources). To deal with the first cause for complexity, one creates different, but coordinated levels of control. At each of these levels a specific part of the control of the production process is accounted for (see Anthony [3]). To deal with the second cause for complexity, one groups manufacturing steps into so-called production units (see Bertrand [8]). Each production unit is responsible for a specific part of the production process. Of course, these production units have to be coordinated to ensure that the products are manufactured timely and efficiently. This activity will be referred to as material coordination (see Bertrand [8]).

Download or read book Advances in Project Scheduling written by R. Slowinski and published by Elsevier. This book was released on 2013-10-22 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-author volume, containing contributions from international experts in the field, presents recent developments in project scheduling for both theory and practice. It is organized in three parts: I. Basic deterministic models; II. Special deterministic models; III. Stochastic models. A variety of approaches is presented dealing with multiple-category resource constraints, different mathematical models of activities, and various project performance measures in single and multiobjective formulation. Exact and heuristic algorithms are presented for both deterministic and stochastic project description.The volume will be of special interest to scientists, students, decision makers, executive managers, consultants and practitioners involved in systems management or operations research, in particular in business, engineering, and finance, but also in other areas of pure and applied sciences.