Download or read book Production Chemicals for the Oil and Gas Industry Second Edition written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.
Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2016-04-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern production methods and environmental constraints demand chemical solutions. And as oilfields age, the need for chemicals to ensure steady production increases. Production Chemicals for the Oil and Gas Industry describes classes of production chemicals for use topside and downhole in the upstream oil and gas industry. It includes coverage of
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2021-03-14 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids, Third Edition delivers all the necessary lists of chemicals by use, their basic components, benefits and environmental implications. Instead of searching through various sources, this updated reference presents a one-stop, non-commercialized approach by organizing products by function, matching the chemical to the process for practical problem-solving, and extending coverage with additional resources and supportive materials. Updates include shale specific fluids and organic additives, including swellable polymers and multi-walled carbon nanotubes. Covering the full spectrum, including fluid loss additives and oil spill treating agents, this book is ideal for every oil and gas operation with its options for lower costs, sustainable use and enhanced production. Helps readers effectively locate and utilize the right chemical application specific to their oil and gas operation Includes updated sections on shale specific fluids, defoamers and organic additives, including biodegradable waste and swellable polymers Covers environmental factors and risks for oil field chemicals, along with the pluses and minuses of each application
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Download or read book Petroleum and Gas Field Processing written by Hussein K. Abdel-Aal and published by CRC Press. This book was released on 2015-09-18 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many oil production processes present a significant challenge to the oil and gas field processing facilities and equipment design. The optimization of the sequential operations of handling the oil–gas mixture can be a major factor in increasing oil and gas production rates and reducing operating costs. Petroleum and Gas Field Processing provides an all-inclusive guide to surface petroleum operations and solves these and other problems encountered in the field processing of oil and gas. Fully revised and updated to reflect major changes over the past decade or so, this second edition builds on the success attained in the first edition. It delivers an expanded and updated treatment that covers the principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. With five new chapters, this second edition covers additional subjects, in particular natural gas, economics and profitability, oil field chemicals, and piping and pumps. The book also contains worked-out examples and case studies from a variety of oil field operations.
Download or read book Chemistry for Enhancing the Production of Oil and Gas written by Wayne Frenier and published by . This book was released on 2017 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry for Enhancing the Production of Oil and Gas provides an overview of the science and technology of the use of production chemicals to enhance and maintain oil and gas production. Geared towards a technically trained audience, this new book emphasizes the technical aspects of production management from the perspective of the upstream oil and gas industry. This new title delivers information as it relates to the production environment and problems that require chemical intervention, and thus, the need for the thousands of different chemicals that are in use. Readers will review the i.
Download or read book Chemistry of Petrochemical Processes written by Sami Matar, Ph.D. and published by Elsevier. This book was released on 2001-07-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chemistry of Petrochemical Processes, readers find a handy and valuable source of information containing insights into petrochemical reactions and products, process technology, and polymer synthesis. The book reviews and describes the reactions and processes involved in transforming petroleum-based hydrocarbons into the chemicals that form the basis of the multi-billion dollar petrochemical industry. In addition, the book includes information on new process developments for the production of raw materials and intermediates for petrochemicals that have surfaced since the book's first edition. Provides a quick understanding of the chemical reactions associated with oil and gas processing Contains insights into petrochemical reactions and products, process technology, and polymer synthesis
Download or read book Petroleum and Gas Field Processing written by H.K. Abdel-Aal and published by CRC Press. This book was released on 2003-07-03 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immediate product extracted from oil and gas wells consists of mixtures of oil, gas, and water that is difficult to transport, requiring a certain amount of field processing. This reference analyzes principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. It details strategies in equipment selection and system design, field development and operation, and process simulation and control to increase plant productivity and safety and avoid losses during purification, treatment, storage, and export. Providing guidelines for developing efficient and economical treatment systems, the book features solved design examples that demonstrate the application of developed design equations as well as review problems and exercises of key engineering concepts in petroleum field development and operation.
Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. Flow diagrams and descriptions of more than 250 leading-edge process technologies An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Download or read book Waste Management in the Chemical and Petroleum Industries written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2019-09-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unravels fundamental engineering for the treatment, recovery, and disposal of solid waste, sludge and wastewater in the petroleum, chemical, and unconventional oil and gas processing industries This new edition unravels essential requirements for the process design and engineering of the equipment and facilities pertaining to waste management for gas refineries, chemical plants, oil terminals, and petrochemical plants. Updated throughout, Waste Management in the Chemical and Petroleum Industries, Second Edition offers chapters on wastewater treatment; physical unit operations; chemical treatment; biological treatment; and wastewater treatment in unconventional oil and gas industries. It also covers wastewater sewer systems; sewage treatment; and solid waste treatment and disposal. New topics include: water pollution terminals the design procedure for effluent water pollution control spill prevention and control groundwater pollution control wastewater pollution control in crude oil terminals Information on the source of polymeric plants examination of water and wastewater radioactivity soil pollution pipeline leak consequence evaluation Waste Management in the Chemical and Petroleum Industries, Second Edition is an ideal text for researchers and advanced students in chemical, petroleum, and environmental fields, as well as for those in civil engineering.
Download or read book Industrial Organic Chemicals written by Harold A. Wittcoff and published by John Wiley & Sons. This book was released on 2004 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Oil Field Chemicals written by Johannes Fink and published by Elsevier. This book was released on 2003-08-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil field chemicals are gaining increasing importance, as the resources of crude oil are decreasing. An increasing demand of more sophisticated methods in the exploitation of the natural resources emerges for this reason. This book reviews the progress in the area of oil field chemicals and additives of the last decade from a rather chemical view. The material presented is a compilation from the literature by screening critically approximately 20,000 references. The text is ordered according to applications, just in the way how the jobs are emerging in practice. It starts with drilling, goes to productions and ends with oil spill. Several chemicals are used in multiple disciplines, and to those separate chapters are devoted. Two index registers are available, an index of chemical substances and a general index. * Gives an introduction to the chemically orientated petroleum engineer. * Provides the petroleum engineer involved with research and development with a quick reference tool. * Covers interdisciplinary matter, i.e. connects petroleum recovery and handling with chemical aspects.
Download or read book Industrial Chemical Process Design 2nd Edition written by Douglas Erwin and published by McGraw Hill Professional. This book was released on 2014 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a hands-on industry consultant and featuring more than 200 illustrations,
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beyond Oil and Gas written by George A. Olah and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently consuming about 85 million barrels of oil a day, and about two-thirds as much natural gas equivalent, both derived from non-renewable natural sources. In the foreseeable future, our energy needs will come from any available alternate source. Methanol is one such viable alternative, and also offers a convenient solution for efficient energy storage on a large scale. In this updated and enlarged edition, renowned chemists discuss in a clear and readily accessible manner the pros and cons of humankind's current main energy sources, while providing new ways to overcome obstacles. Following an introduction, the authors look at the interrelationship of fuels and energy, and at the extent of our non-renewable fossil fuels. They also discuss the hydrogen economy and its significant shortcomings. The main focus is on the conversion of CO2 from industrial as well as natural sources into liquid methanol and related DME, a diesel fuel substitute that can replace LNG and LPG. The book is rounded off with an optimistic look at future possibilities. A forward-looking and inspiring work that vividly illustrates potential solutions to our energy and environmental problems.
Download or read book Handbook of Petrochemicals Production Second Edition written by Robert A. Meyers and published by McGraw Hill Professional. This book was released on 2018-10-06 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide to petrochemicals production processes—fully revised to cover the latest advances Get all the information you need on petrochemical processes for major organic chemicals inside this industry-standard one-stop reference. Prepared by leading petrochemical licensing firms, Handbook of Petrochemicals Production Processes, Second Edition clearly explains the powerful techniques used to create the most economically important chemicals in the world. The book offers cutting-edge production methods along with detailed product properties. You will discover how to effectively evaluate licensable processes for new production through the comparison of technologies, environmental factors, and economics. Coverage includes: •General process descriptions, feed definitions, product yields, and simplified flow diagrams •Process chemistries and thermodynamics •Commercial process perspectives, including plant locations and long-term plans •Process details, with flow diagrams and mass and energy balances for major process variations •Feeds and details on unique and key equipment •Brand-new details on gas to petrochemical conversion, biomass to petrochemical conversion, and bisphonal A (BPA)
Download or read book Introduction to Chemicals from Biomass written by James H. Clark and published by John Wiley & Sons. This book was released on 2015-03-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Chemicals from Biomass, Second Edition presents an overview of the use of biorenewable resources in the 21st century for the manufacture of chemical products, materials and energy. The book demonstrates that biomass is essentially a rich mixture of chemicals and materials and, as such, has a tremendous potential as feedstock for making a wide range of chemicals and materials with applications in industries from pharmaceuticals to furniture. Completely revised and updated to reflect recent developments, this new edition begins with an introduction to the biorefinery concept, followed by chapters addressing the various types of available biomass feedstocks, including waste, and the different pre-treatment and processing technologies being developed to turn these feedstocks into platform chemicals, polymers, materials and energy. The book concludes with a discussion on the policies and strategies being put in place for delivering the so-called Bioeconomy. Introduction to Chemicals from Biomass is a valuable resource for academics, industrial scientists and policy-makers working in the areas of industrial biotechnology, biorenewables, chemical engineering, fine and bulk chemical production, agriculture technologies, plant science, and energy and power generation. We need to reduce our dependence on fossil resources and increasingly derive all the chemicals we take for granted and use in our daily life from biomass – and we must make sure that we do this using green chemistry and sustainable technologies! For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: • The biorefinery concept • Biomass feedstocks • Pre-treatment technologies • Platform molecules from renewable resources • Polymers from bio-based monomers • Biomaterials • Bio-based energy production Praise for the 1st edition: “Drawing on the expertise of the authors the book involves a degree of plant biology and chemical engineering, which illustrates the multidisciplinary nature of the topic beautifully” - Chemistry World
