Download or read book Safety of Genetically Engineered Foods written by National Research Council and published by National Academies Press. This book was released on 2004-07-08 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assists policymakers in evaluating the appropriate scientific methods for detecting unintended changes in food and assessing the potential for adverse health effects from genetically modified products. In this book, the committee recommended that greater scrutiny should be given to foods containing new compounds or unusual amounts of naturally occurring substances, regardless of the method used to create them. The book offers a framework to guide federal agencies in selecting the route of safety assessment. It identifies and recommends several pre- and post-market approaches to guide the assessment of unintended compositional changes that could result from genetically modified foods and research avenues to fill the knowledge gaps.
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book The Production and Uses of Genetically Transformed Plants written by Michael W. Bevan and published by . This book was released on 1994 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production and Uses of Genetically Transformed Plants written by M.W. Bevan and published by Springer. This book was released on 1994-06-30 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book arises from a Royal Society discussion meeting and describes the ways in which the plant genomes have been modified to confer resistance to pathogens, pests, and herbicides; to modify developmental and physiological processes and to create plants with previously unthought of uses.
Download or read book Genetically Modified Crops in Agriculture written by Danny Watson and published by Scientific e-Resources. This book was released on 2019-11-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically modified crops are plants used in agriculture, the DNA of which has been modified using genetic engineering methods. In most cases, the aim is to introduce a new trait to the plant which does not occur naturally in the species. Examples in food crops include resistance to certain pests, diseases, or environmental conditions, reduction of spoilage, or resistance to chemical treatments, or improving the nutrient profile of the crop. Recently rapid advances in the development and commercialization of transgenic crops across the world have been witnessed both in terms increased crop coverage and economic benefits. Genetically modified foods are foods derived from genetically modified organisms have had specific changes introduced into their DNA by genetic engineering techniques. The main aim of genetically modified crops is to produce a food that is able to survive even if any harmful chemicals or pesticides or herbicides are sprayed. Other benefit of genetically modified crops is to make food stay fresh for a long time. Some of genetically modified crops and food are corn, tomato, beets, potatoes, sprouts and alfalfa. It involves the insertion or deletion of genes. Examples in non-food crops include production of pharmaceutical agents, biofuels, and other industrially useful goods, as well as for bioremediation. This book covers those facets, from the source of the gene, compositions of a gene construct, method of gene delivery, and result of gene integration and expression, to effects of the transgene on plants and the ecology.
Download or read book Genetically Modified Pest Protected Plants written by National Research Council and published by National Academies Press. This book was released on 2000-08-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the risks and benefits of crops that are genetically modified for pest resistance, the urgency of establishing an appropriate regulatory framework for these products, and the importance of public understanding of the issues. The committee critically reviews federal policies toward transgenic products, the 1986 coordinated framework among the key federal agencies in the field, and rules proposed by the Environmental Protection Agency for regulation of plant pesticides. This book provides detailed analyses of: Mechanisms and results of genetic engineering compared to conventional breeding for pest resistance. Review of scientific issues associated with transgenic pest-protected plants, such as allergenicity, impact on nontarget plants, evolution of the pest species, and other concerns. Overview of regulatory framework and its use of scientific information with suggestions for improvements.
Download or read book Genetic Modification of Plants written by Frank Kempken and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the aim of sorting fact from fiction over genetically modified (GM) crops, this book brings together the knowledge of 30 specialists in the field of transgenic plants. It covers the generation and detection of these plants as well as the genetic traits conferred on transgenic plants. In addition, the book looks at a wide variety of crops, ornamental plants and tree species that are subject to genetic modifications, assessing the risks involved in genetic modification as well as the potential economic benefits of the technology in specific cases. The book’s structure, with fully cross-referenced chapters, gives readers a quick access to specific topics, whether that is comprehensive data on particular species of ornamentals, or coverage of the socioeconomic implications of GM technology. With an increasing demand for bioenergy, and the necessary higher yields relying on wider genetic variation, this book supplies all the technical details required to move forward to a new era in agriculture.
Download or read book Genetic Engineering of Plants written by National Research Council and published by National Academies Press. This book was released on 1984-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book...is, in fact, a short text on the many practical problems...associated with translating the explosion in basic biotechnological research into the next Green Revolution," explains Economic Botany. The book is "a concise and accurate narrative, that also manages to be interesting and personal...a splendid little book." Biotechnology states, "Because of the clarity with which it is written, this thin volume makes a major contribution to improving public understanding of genetic engineering's potential for enlarging the world's food supply...and can be profitably read by practically anyone interested in application of molecular biology to improvement of productivity in agriculture."
Download or read book Transgenic Plants written by Leandro Peña and published by Springer Science & Business Media. This book was released on 2008-02-05 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Transgenic Plants: Methods and Protocols is to provide a source of information to guide the reader through a wide range of frequently used, broadly applicable, and easily reproducible techniques involved in the gene- tion of transgenic plants. Its step-by-step approach covers a series of methods for genetically transforming plant cells and tissues, and for recovering whole transgenic plants from them. The volume then moves on to the use of sele- able and reporter markers, positive selection, marker elimination after rec- ery of transgenic plants, and the analysis of transgene integration, expression, and localization in the plant genome. Although contributors usually refer to model plants in most chapters, the protocols described herein should be widely applicable to many plant species. The last two sections are devoted to me- ods of risk assessment and to exploring the current and future applications of transgenic technology in agriculture and its social implications in a case study. Transgenic Plants: Methods and Protocols is divided into six major s- tions plus an introduction, comprising 27 chapters. Part I, the Introduction, is a review of the past, present, and perspectives of the transgenic plants, from the discovery of Agrobacterium tumefaciens as a feasible transformation vector, to its use as a tool to study gene expression and function, and the current and possible future applications of this technology in agriculture, industry, and medicine.
Download or read book Transgenic Plants in Agriculture written by Axel Kahn and published by John Libbey Eurotext. This book was released on 1999 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Axel Kahn's book, published late in 1996, which provided an overview of the opinions expressed by the Commission of Biomolecular Engineering about genetically modified plants, was a great success. Given the scale and importance of the phenomenon, the French Ministry of Agriculture and publishers John Libbey Eurotext have decided to publish an English-language version of this fundamental book about the introduction and development of genetically modified plants. For some years now, plant biotechnology, especially genetic engineering, has enabled us to modify the cycle of plant production, strengthening resistance to weedkillers and pests, improving yields and quality, adapting plants to unfavourable environments and creating new species. In France, the Biomolecular Engineering Commission (CGB) is responsible for authorising the marketing of these modified products. Over the past ten years it has certified 450 new products for public consumption. This book, which is suitable for the general public, reports on the experience acquired by the CGB and the studies it has conducted: What are the potential risks associated with so-called transgenetic plants? Are there any undetectable phenomena involved? - How can such plants be produced more safely? Axel Kahn is a world-renowned geneticist and clinician, chaired the Biomolecular Engineering Commission until 1998. Here he explains the "philosophy" of the CGB, which has gained unrivalled experience in Europe, and sets out ethical and scientific guidelines for the use of genetic engineering techniques.
Download or read book Genetic Engineering of Horticultural Crops written by Gyana Ranjan Rout and published by Academic Press. This book was released on 2018-01-08 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Horticultural Crops provides key insights into commercialized crops, their improved productivity, disease and pest resistance, and enhanced nutritional or medicinal benefits. It includes insights into key technologies, such as marker traits identification and genetic traits transfer for increased productivity, examining the latest transgenic advances in a variety of crops and providing foundational information that can be applied to new areas of study. As modern biotechnology has helped to increase crop productivity by introducing novel gene(s) with high quality disease resistance and increased drought tolerance, this is an ideal resource for researchers and industry professionals. Provides examples of current technologies and methodologies, addressing abiotic and biotic stresses, pest resistance and yield improvement Presents protocols on plant genetic engineering in a variety of wide-use crops Includes biosafety rule regulation of genetically modified crops in the USA and third world countries
Download or read book The Future of Genetically Modified Crops written by Felicia Wu and published by Rand Corporation. This book was released on 2004-08-13 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is now on the cusp of a new agricultural revolution, the so-called Gene Revolution, in which genetically modified (GM) crops are tailored to address chronic agricultural problems in certain regions of the world. This monograph report investigates the circumstances and processes that can induce and sustain this new agricultural revolution. The authors compare the Green Revolution of the 20th century with the GM crop movement to assess the agricultural, technological, sociological, and political differences between the two movements.
Download or read book Genetically Engineered Foods written by Alexandru Mihai Grumezescu and published by Academic Press. This book was released on 2017-09-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically Engineered Foods, Volume 6 in the Handbook of Food Bioengineering series, is a solid reference for researchers and professionals needing information on genetically engineered foods in human and animal diets. The volume discusses awareness, benefits vs. disadvantages, regulations and techniques used to obtain, test and detect genetically modified plants and animals. An essential resource offering informed perspectives on the potential implications of genetically engineered foods for humans and society. Written by a team of scientific experts who share the latest advances to help further more evidence-based research and educate scientists, academics and government professionals about the safety of the global food supply. Provides in-depth coverage of the issues surrounding genetic engineering in foods Includes hot topic areas such as nutragenomics and therapeutics to show how genetically engineered foods can promote health and potentially cure disease Presents case studies where genetically engineered foods can increase production in Third World countries to promote food security Discusses environmental and economic impacts, benefits and risks to help inform decisions
Download or read book Advances in Plant Transgenics Methods and Applications written by Ramalingam Sathishkumar and published by Springer Nature. This book was released on 2019-11-15 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The green revolution led to the development of improved varieties of crops, especially cereals, and since then, classical or molecular breeding has resulted in the creation of economically valuable species. Thanks to recent developments in genetic engineering, it has become possible to introduce genes from different sources, such as bacteria, fungi, viruses, mice and humans, to plants. This technology has made the scientific community aware of the critical role of transgenics, not only as a means of producing stress tolerant crops but also as a platform for the production of therapeutics through molecular farming. This book discusses the commercial applications of plant transgenic technologies, including the use of transgenic cell culture approachesto improve the production of metabolites and high-value therapeutics as well as transgenic plants in pest management. It also explores generation of novel vectors, protein production using chloroplast engineering and the latest developments in this area, such as genome editing in plants. Featuring general discussions and research papers by leading international experts, it is a valuable resource for scientists, teachers, students and industrialists working in the field.
Download or read book Environmental Impact of Genetically Modified Crops written by Natalie Ferry and published by CABI. This book was released on 2009-01-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The genetic modification of crops continues to be the subject of intense debate, and opinions are often strongly polarised. Environmental Impact of Genetically Modified Crops addresses the major concerns of scientists, policy makers, environmental lobby groups and the general public regarding this controversial issue, from an editorially neutral standpoint. While the main focus is on environmental impact, food safety issues, for both humans and animals are also considered. The book concludes with a discussion on the future of agricultural biotechnology in the context of sustainability, natural resource management and future global population and food supply.
Download or read book Manufacture Of Medical And Health Products By Transgenic Plants written by Eithan Galun and published by World Scientific. This book was released on 2001-02-26 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the mid-eighties, there was a revolution in plant biotechnology. Simple procedures could be used to genetically transform plants. Such transgenic plants will express alien genes, virtually from any organism, provided the genes are flanked by appropriate controlling elements. Soon after this biotechnology became available, there was an awareness that crop plants can serve as manufacturers of high-value medical products. This book provides the molecular and biotechnological background for genetic transformation in plants, as well as updated information about the production of antibodies, antigens and other medical and health products by transgenic plants. The book handles the relevant information in a critical manner by pointing out the risks and problems as well as presenting the outlook for development in this field. It provides a comprehensive and well-balanced treatment of its theme.
Download or read book Environmental Effects of Transgenic Plants written by National Research Council and published by National Academies Press. This book was released on 2002-02-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transgenic crops offer the promise of increased agricultural productivity and better quality foods. But they also raise the specter of harmful environmental effects. In this new book, a panel of experts examines: • Similarities and differences between crops developed by conventional and transgenic methods • Potential for commercialized transgenic crops to change both agricultural and nonagricultural landscapes • How well the U.S. government is regulating transgenic crops to avoid any negative effects. Environmental Effects of Transgenic Plants provides a wealth of information about transgenic processes, previous experience with the introduction of novel crops, principles of risk assessment and management, the science behind current regulatory schemes, issues in monitoring transgenic products already on the market, and more. The book discusses public involvementâ€"and public confidenceâ€"in biotechnology regulation. And it looks to the future, exploring the potential of genetic engineering and the prospects for environmental effects.
