Download or read book Production and Processing of Fine Particles written by A. J. Plumpton and published by Elsevier. This book was released on 2017-05-04 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of an international symposium organised by the Metallurgical Society of the Canadian Institute of Mining and Metallurgy. The aims of the symposium were to discuss fundamental and practical aspects of the technology for the production of fine inorganic particles for the metals, industrial minerals and advanced ceramics sectors, to highlight particle characterization methods and developments, and to review major advances in the processing and extractive metallurgy of finely-sized minerals. 96 conference papers by authors from 19 countries addressed such topics as particle morphology and size analysis, physical and chemical methods for producing fine particles, processing of minerals using gravity, magnetic and electrostatic separation, flotation and flocculation, phase separation involving fine particles, and the hydrometallurgy and pyroprocessing of fine particles. This book will be of interest to mineral processing scientists and engineers, ceramicists, extractive metallurgists and chemical engineers, who are faced with the increasing significance of inorganic fine particles either as valuable products or as materials to be treated in mineral processing systems.
Download or read book Advances in Fine Particles Processing written by John Hanna and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing of fine particles has presented numerous challenges to scientists and engineers for many years. Considerable progress has al ready been made in meeting these challenges across various fields of applications around the world. Research on every aspect of fine particle processing has gained momentum in recent years, resulting in the development of new processes, improved products, and better understanding of the science and engineering fundamentals of fine particles. This symposium addressed the recent progress in fine particles processing, particularly in the production of minerals for chemicals, pigments and metal production, ceramic materials, and fossil fuels. This book represents the edited proceedings of the International Symposium on Advances in Fine Particles Processing, where selected peer-reviewed papers describe current practices, review the state of the art and report original fundamental and applied research on fine particle production, sizing, characterization of the interface, fluid flow, and interparticle colloidal interactions, leading to dispersion, flocculation and flotation. Processing of fine particles by multi-chemical, physical and biological phenomena has also been addressed. Accordingly, the book consists of seven parts, with each part addressing a specific topic. Part One deals with production of fine particles by comminu tion methods where different milling practices, mathematic modeling and physical chemical control methods are reported. Part Two covers particle flow properties in various fluids. Part Three addresses surface and colloidal phenomena in fine particle processing, while Part Four continues this topic but with emphasis on clay minerals.
Download or read book Fine Particles Processing written by P. Somasundaran and published by . This book was released on 1980 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Fine Particles Processing written by John Hanna and published by Springer. This book was released on 2012-06-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing of fine particles has presented numerous challenges to scientists and engineers for many years. Considerable progress has al ready been made in meeting these challenges across various fields of applications around the world. Research on every aspect of fine particle processing has gained momentum in recent years, resulting in the development of new processes, improved products, and better understanding of the science and engineering fundamentals of fine particles. This symposium addressed the recent progress in fine particles processing, particularly in the production of minerals for chemicals, pigments and metal production, ceramic materials, and fossil fuels. This book represents the edited proceedings of the International Symposium on Advances in Fine Particles Processing, where selected peer-reviewed papers describe current practices, review the state of the art and report original fundamental and applied research on fine particle production, sizing, characterization of the interface, fluid flow, and interparticle colloidal interactions, leading to dispersion, flocculation and flotation. Processing of fine particles by multi-chemical, physical and biological phenomena has also been addressed. Accordingly, the book consists of seven parts, with each part addressing a specific topic. Part One deals with production of fine particles by comminu tion methods where different milling practices, mathematic modeling and physical chemical control methods are reported. Part Two covers particle flow properties in various fluids. Part Three addresses surface and colloidal phenomena in fine particle processing, while Part Four continues this topic but with emphasis on clay minerals.
Download or read book Production and Processing of Fine Particles written by Arthur J. Plumpton and published by New York ; Toronto : Pergamon Press. This book was released on 1988-01-01 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production and Processing of Fine Particles written by A. J. Plumpton and published by . This book was released on 1988 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Symposium on the Production and Processing of Fine Particles written by A. J. Plumpton and published by Pergamon. This book was released on 1988-09 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fine Particles Processing written by and published by . This book was released on 1980 with total page 1865 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fine Particles written by Tadao Sugimoto and published by CRC Press. This book was released on 2000-09-25 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The first comprehensive book on fine particle synthesis that ranges from fundamental principles to the most advanced concepts, highlighting mondispersed particles from nanometers to micrometers. Describes mechanisms of formation and specific characteristics of each family of compounds while identifying problems and proposing solutions. Contains subsections that analyze growth processes, characterize products, and delineate physical and chemical results based on causality."
Download or read book Selected Papers from PRES 2018 written by Jiří Jaromír Klemeš and published by MDPI. This book was released on 2020-06-17 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The depletion of natural energy resources provides evidential adverse impacts on world economy functionality. The strong requirement of a sustainable energy supply has escalated intensive research and the discovery of cleaner energy sources, as well as efficient energy management practices. In the context of a circular economy, this research not only targets the optimisation of resources utilisation at different stages but also emphasises the eco-design of products to extend production life spans. Based on this concept, this book discusses the roles of process integration approaches, renewable energy sources utilisation and design modifications in addressing the process energy and exergy efficiency improvement. The primary focus is to enhance the economic and environmental performance through process analysis, modelling and optimisation. The articles mainly show the contribution of each aspect: (a) design and numerical study for innovative energy-efficient technologies, (b) process integration—heat and power, (c) process energy efficiency or emission analysis, and (d) optimisation of renewable energy resources’ supply chain. The articles are based on the latest contribution of this journal’s Special Issues in the 21st conference entitled “Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES)”. This book is complemented with an editorial review to highlight the broader state-of-the-art development.
Download or read book Ceramic Fabrication Processes written by Franklin F. Y. Wang and published by Elsevier. This book was released on 2013-10-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 9: Ceramic Fabrication Processes covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book discusses the powder preparation processes; milling; the characterization of ceramic powders; and the effects of powder characteristics. The text also describes dry pressing; hot pressing; isostatic pressing; slip casting; doctor-blade process; firing; and ceramic machining and surface finishing. Surface treatments; mechanical behavior; and methods of measuring surface texture are also considered. The book further tackles crystal growth as well as controlled solidification in ceramic eutectic systems. The text also looks into controlled grain growth. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.
Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
Download or read book Fine particles processing proceedings of the international symposium on fine particles processing Las Vegas Nevada February 24 28 1980 written by S. Somasundaram and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Characterization and Confectionery Applications of Fine Particles Produced by Small media Milling written by Steven J. Hess and published by . This book was released on 2009 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensation Particle Counting Technology and Its Applications written by Longfei Chen and published by CRC Press. This book was released on 2024-09-20 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condensation Particle Counting Technology and Its Applications introduces the principles, key components, calibration methods, and applications of condensation particle counting systems. This book delves into the adverse effects of fine particles on human health, along with the existing detection technologies for these particles. It discusses the theories and methods of optical measurement for fine particles and elaborates on the applicable conditions for each light scattering theory, providing a theoretical foundation for detecting particle-scattered light. This book concludes with an overview of the challenges posed by ongoing climate change and future research prospects in condensation particle counting (CPC). This book is intended for industry professionals and environmental researchers specializing in particle and aerosol measurement, detection methods, and technology.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Fine Particles Processing written by P. Somasundaran and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
