Download or read book Safety Critical Systems Problems Process and Practice written by Chris Dale and published by Springer Science & Business Media. This book was released on 2009-01-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Safety-Critical Systems: Problems, Process and Practice" contains the papers presented at the seventeenth annual Safety-critical Systems Symposium, held at Brighton, UK, in February 2009. The Symposium is for engineers, managers and academics in the field of system safety, across all industry sectors, so the papers making up this volume offer a wide-ranging coverage of current safety topics, and a blend of academic research and industrial experience. They include both recent developments in the field and discussion of open issues that will shape future progress. The first paper reflects a tutorial - on Hazard Analysis - held on the first day of the Symposium. The subsequent 14 papers are presented under the headings of the Symposium's sessions: the Economics of Safety, Transport Safety, Safety in Society, New Challenges, Safety Assessment and Safety Standards. The book will be of interest to both academics and practitioners working in the safety-critical systems arena.
Download or read book Consumer Product Safety written by U.S. Consumer Product Safety Commission and published by . This book was released on 1979 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Critical Systems The Convergence of High Tech and Human Factors written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety-critical systems, in the sense of software-based systems used in safety critical applications, are 'high-tech'. They are products of modern technology. Their effective, efficient and safe functioning depends not only on the devel opment of the right technologies but also on the right use of them. The safety of a system may be compromised not only by faults in the system but also by the use in the first place of an unreliable, unsafe, or unproved technology in its development. The key to the development and use of both technologies and systems is the human being. Until recently, the importance of human involvement, other than at the direct operational level, was hardly admitted. But now the unreliability of humans is recognised, as is the potential for latent faults to be introduced into systems at any point in their life cycles, by all who are in volved with them, including designers and strategic decision makers.
Download or read book Mission Critical and Safety Critical Systems Handbook written by Kim Fowler and published by Newnes. This book was released on 2009-11-19 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a consolidated, comprehensive information resource for engineers working with mission and safety critical systems. Principles, regulations, and processes common to all critical design projects are introduced in the opening chapters. Expert contributors then offer development models, process templates, and documentation guidelines from their own core critical applications fields: medical, aerospace, and military. Readers will gain in-depth knowledge of how to avoid common pitfalls and meet even the strictest certification standards. Particular emphasis is placed on best practices, design tradeoffs, and testing procedures. - Comprehensive coverage of all key concerns for designers of critical systems including standards compliance, verification and validation, and design tradeoffs - Real-world case studies contained within these pages provide insight from experience
Download or read book Essential Health and Safety Study Skills written by Jonathan Backhouse and published by Routledge. This book was released on 2013-08-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studying for exams, working in teams, writing detailed yet succinct reports and importantly time management aren’t second nature to most, so this book provides clear guidance and will be an essential tool for anyone taking a health and safety course. For many students the learning experience will be a return to studying after some considerable time so this book combines practical advice with helpful exam-related information. Case studies and activities based on key health and safety topics that are covered by most Awarding Bodies Guidance on how to take both multiple-choice and written exams; with details on how to answer the action verbs, used in exams questions; including identify and outline Key principles teach how to Receive the information; Remember the information; and Recall the information for your exam
Download or read book The Expert Test Manager written by Rex Black and published by Rocky Nook, Inc.. This book was released on 2017-04-28 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the ISTQB Expert Level Test Manager syllabus and is a complete, one-stop preparation guide for the reader who is otherwise qualified (based on experience as a test manager) to take the Expert Level Test Manager exam. Included are extensive hands-on exercises and sample exam questions that comply with ISTQB standards for Expert Level exams. p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Verdana} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Verdana; min-height: 13.0px} The ISTQB certification program is the leading software tester certification program in the world. With more than 500,000 certificates issued and a global presence in 70 countries, you can be confident in the value and international stature that the ISTQB Expert Level certificate can offer you.
Download or read book Product Focused Software Process Improvement written by Pekka Abrahamsson and published by Springer. This book was released on 2015-11-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Conference on Product-Focused Software Process Improvement, PROFES 2015, held in Bolzano, Italy, in December 2015. The 18 revised full papers presented together with 10 short papers and 18 workshop papers were carefully reviewed and selected from 50 submissions. The papers are organized in topical sections on lessons learned from industry-research collaborations; instruments to improve the software development process; requirements, features, and release management; practices of modern development processes; human factors in modern software development; effort and size estimation validated by professionals; empirical generalization; software reliability and testing in industry; workshop on processes, methods and tools for engineering embedded systems; workshop on human factors in software development processes; and workshop on software startups: state of the art and state of the practice.
Download or read book Safety Critical Systems Handbook written by David J. Smith and published by Elsevier. This book was released on 2010-11-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety Critical Systems Handbook: A Straightfoward Guide to Functional Safety, IEC 61508 (2010 Edition) and Related Standards, Including Process IEC 61511 and Machinery IEC 62061 AND ISO 13849, Third Edition, offers a practical guide to the functional safety standard IEC 61508. The book is organized into three parts. Part A discusses the concept of functional safety and the need to express targets by means of safety integrity levels. It places functional safety in context, along with risk assessment, likelihood of fatality, and the cost of conformance. It also explains the life-cycle approach, together with the basic outline of IEC 61508 (known as BS EN 61508 in the UK). Part B discusses functional safety standards for the process, oil, and gas industries; the machinery sector; and other industries such as rail, automotive, avionics, and medical electrical equipment. Part C presents case studies in the form of exercises and examples. These studies cover SIL targeting for a pressure let-down system, burner control system assessment, SIL targeting, a hypothetical proposal for a rail-train braking system, and hydroelectric dam and tidal gates. - The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards - Helps readers understand the process required to apply safety critical systems standards - Real-world approach helps users to interpret the standard, with case studies and best practice design examples throughout
Download or read book Ctts Safety Products CDL Study Guide written by CTTS Safety Products Staff and published by Kendall/Hunt Publishing Company. This book was released on 1998-07 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Focused Software Process Improvement written by Regine Kadgien and published by Springer Nature. This book was released on 2024-01-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 24th International Conference on Product-Focused Software Process Improvement, PROFES 2023, which took place in Dornbirn, Austria, in December 2023. The 21 full technical papers, 8 short papers, and 1 poster paper presented in this volume were carefully reviewed and selected from 82 submissions. The book also contains one tutorial paper, 12 and workshop papers and 3 doctoral symposium papers. The contributions were organized in topical sections as follows: Part I: Software development and project management; machine learning and data science; software analysis and tools; software testing and quality assurance; security, vulnerabilities, and human factors; Part II: Posters; Tutorials; 2nd Workshop on Computational Intelligence and Software Engineering (CISE 2023); 2nd Workshop on Engineering Processes and Practices for Quantum Software (PPQS’ 23); doctoral symposium.
Download or read book deWit s Fundamental Concepts and Skills for Nursing E Book written by Patricia A. Williams and published by Elsevier Health Sciences. This book was released on 2016-12-23 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: - NEW! Nursing Concepts and Exemplars listed for each chapter to support concept curriculums. - NEW! Discussion of QSEN and highlighted Safety information provides you with the knowledge, skills, and attitudes necessary to continuously improve the quality and safety of patient care. - EXPANDED! Evidence-Based Practice boxes and highlighted best practices point out the most current, evidence-based information. - UPDATED! Expanded art program with original photos and line art better illustrates nursing concepts.
Download or read book Biomedical Pharmaceutical Sciences with Patient Care Correlations written by Reza Karimi and published by Jones & Bartlett Publishers. This book was released on 2014-01-29 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical & Pharmaceutical Sciences with Patient Care Correlations provides a solid foundation in the areas of science that pharmacy students most need to understand to succeed in their education and career. Offering a comprehensive overview of the biomedical and pharmaceutical sciences, it is an ideal primary or secondary textbook for introductory courses. Students can also use this text to refresh their scientific knowledge before beginning graduate study. Biomedical & Pharmaceutical Sciences with Patient Care Correlations includes 16 chapters that cover subjects ranging from cell biology and medicinal chemistry to toxicology and biostatistics. It also includes clinical correlations and integrated cases. Practical as well as informative, this essential reference relates the subject matter to the real world of pharmacy practice to assist students throughout their graduate studies and professional careers. Features Provides a comprehensive introduction to the biomedical and pharmaceutical sciences curriculum Serves as an ideal text for all introductory pharmacy courses Covers the topics that are most challenging for students Relates science to the real world of pharmacy practice Includes over 525 illustrations, photos, and figures
Download or read book Ask a Manager written by Alison Green and published by Ballantine Books. This book was released on 2018-05-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the creator of the popular website Ask a Manager and New York’s work-advice columnist comes a witty, practical guide to 200 difficult professional conversations—featuring all-new advice! There’s a reason Alison Green has been called “the Dear Abby of the work world.” Ten years as a workplace-advice columnist have taught her that people avoid awkward conversations in the office because they simply don’t know what to say. Thankfully, Green does—and in this incredibly helpful book, she tackles the tough discussions you may need to have during your career. You’ll learn what to say when • coworkers push their work on you—then take credit for it • you accidentally trash-talk someone in an email then hit “reply all” • you’re being micromanaged—or not being managed at all • you catch a colleague in a lie • your boss seems unhappy with your work • your cubemate’s loud speakerphone is making you homicidal • you got drunk at the holiday party Praise for Ask a Manager “A must-read for anyone who works . . . [Alison Green’s] advice boils down to the idea that you should be professional (even when others are not) and that communicating in a straightforward manner with candor and kindness will get you far, no matter where you work.”—Booklist (starred review) “The author’s friendly, warm, no-nonsense writing is a pleasure to read, and her advice can be widely applied to relationships in all areas of readers’ lives. Ideal for anyone new to the job market or new to management, or anyone hoping to improve their work experience.”—Library Journal (starred review) “I am a huge fan of Alison Green’s Ask a Manager column. This book is even better. It teaches us how to deal with many of the most vexing big and little problems in our workplaces—and to do so with grace, confidence, and a sense of humor.”—Robert Sutton, Stanford professor and author of The No Asshole Rule and The Asshole Survival Guide “Ask a Manager is the ultimate playbook for navigating the traditional workforce in a diplomatic but firm way.”—Erin Lowry, author of Broke Millennial: Stop Scraping By and Get Your Financial Life Together
Download or read book Combination Products written by Smita Gopalaswamy and published by CRC Press. This book was released on 2008-04-22 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of combination product development (products born of the integration of medical devices, biologics, and drugs) is so new that, while literature abounds on each part individually, there are very few publications, including FDA documents, available concerning the unique challenges posed by this nascent but fast-growing area. Providing
Download or read book Blood and Blood Products written by Institute of Medicine and published by National Academies Press. This book was released on 1997-01-12 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the safety and availability of the nation's supply of blood and blood components. It discusses the risks of disease transmission, methods of guarding the blood supply, new ideas on safety and monitoring, risk tolerance, risk communication, and no-fault insurance.
Download or read book Graphic with Materials Technology written by Lesley Cresswell and published by Heinemann. This book was released on 2004 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study guide that matches the Edexcel specification to help students succeed at A Level, this volume examines graphics within materials technology and is intended to aid revision as well as study.
Download or read book Cook Hussey s Assistive Technologies written by Albert M. Cook and published by Elsevier Health Sciences. This book was released on 2008-01-01 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: It's here: the latest edition of the one text you need to master assistive strategies, make confident clinical decisions, and help improve the quality of life for people with disabilities. Based on the Human Activity Assistive Technology (HAAT) model, Assistive Technologies: Principles and Practice, 4th Edition provides detailed coverage of the broad range of devices, services, and practices that comprise assistive technology, and focuses on the relationship between the human user and the assisted activity within specific contexts. Updated and expanded, this new edition features coverage of new ethical issues, more explicit applications of the HAAT model, and a variety of global issues highlighting technology applications and service delivery in developing countries. Human Activity Assistive Technology (HAAT) framework demonstrates assistive technology within common, everyday contexts for more relevant application. Focus on clinical application guides you in applying concepts to real-world situations. Review questions and chapter summaries in each chapter help you assess your understanding and identify areas where more study is needed. Content on the impact of AT on children and the role of AT in play and education for children with disabilities demonstrates how AT can be used for early intervention and to enhance development. Coverage of changing AT needs throughout the lifespan emphasizes how AT fits into people's lives and contributes to their full participation in society. Principles and practice of assistive technology provides the foundation for effective decision-making. NEW! Global issues content broadens the focus of application beyond North America to include technology applications and service delivery in developing countries. NEW! Ethical issues and occupational justice content exposes you to vital information as you start interacting with clients. NEW! More case studies added throughout the text foster an understanding of how assistive technologies are used and how they function. NEW! Updated content reflects current technology and helps keep you current. NEW! Explicit applications of the HAAT model in each of the chapters on specific technologies and more emphasis on the interactions among the elements make content even easier to understand.
