Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by Elsevier. This book was released on 2024-05-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.
Download or read book Plastics Engineered Product Design written by D.V. Rosato and published by Elsevier. This book was released on 2003-12-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive book which collates the experience of two well-known US plastic engineers.• Enables engineers to make informed decisions.• Includes a unique chronology of the world of plastics. The use of plastics is increasing year on year, and new uses are being found for plastics in many industries. Designers using plastics need to understand the nature and properties of the materials which they are using so that the products perform to set standards. This book, written by two very experienced plastics engineers, provides copious information on the materials, fabrication processes, design considerations and plastics performance, thus allowing informed decisions to be made by engineers. It also includes a useful chronology of the world of plastics, a resource not found elsewhere.
Download or read book Industrial Design of Plastics Products written by M. Joseph Gordon and published by Wiley-Interscience. This book was released on 2003 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive volume to date on the design and manufacture of plastics Plastic product design relies on the same formulas and procedures used for the design of metal, yet plastics are unique building materials that require more in-depth knowledge to produce acceptable results. Plastic product designers must address specific quality control concerns in order to produce quality products at acceptable costs. Covering the many variables that impact the success of a plastics manufacturing program, Industrial Design of Plastics Products provides a complete resource for the efficient design and production of plastics. Industrial Design of Plastics Products lists all steps necessary for effectively designing a plastic product for any industry. Physical properties and agency codes are listed, as well as full checklists for all areas of product design, contract, material selection, assembly techniques, manufacture, tooling, decoration, and shipping. The text also offers a list of examples with corresponding case studies to illustrate key concepts. Other features of this comprehensive volume include: * An easy-to-understand list of requirements for establishing a manufacturing program * A discussion of how material properties should be analyzed to achieve a product with the correct properties * A full set of design equations, including examples of how they should be used and considered when designing a plastic product Successful plastic product design involves using the design team method to determine which material, mold, and process is best to manufacture a product. Industrial Design of Plastics Products provides a more detailed treatment in the basics of the subject than any other available resource, proving invaluable to design, chemical, and electrical engineers; materials scientists; and plastics manufacturers.
Download or read book Plastics Product Design written by Paul F. Mastro and published by John Wiley & Sons. This book was released on 2016-02-24 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at designers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with. The reader is provided with an introduction to plastics as a design material and a discussion of materials commonly in use today. There is a discussion of a variety of processes available to the designer to make a part along with the design considerations each process will entail. This section also includes a discussion of useful prototyping processes, including advantages and disadvantages of each. Next, the book will discuss general design considerations applicable to most plastics product designs. In section 2 of the book the author will discuss elements of design of a number of generic plastic product types based on his 40+ years of experience of product design and development for a several companies with a variety of products. This section will include discussions of structural components, gears, bearings, hinges, snap fits, packaging, pressure vessels, and optical components. This section will discuss the general considerations that apply to these applications as well as specific incites about each particular application. The book concludes with a discussion of the general design process.
Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by William Andrew. This book was released on 2021-08-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts
Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.
Download or read book Plastic Component Design written by Paul D. Q. Campbell and published by Industrial Press Inc.. This book was released on 1996 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.
Download or read book Plastic Product Design written by Ronald D. Beck and published by . This book was released on 1980 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Product Material and Process Selection Handbook written by Dominick V Rosato and published by Elsevier. This book was released on 2004-08-04 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book. *Essential for people involved in working with plastic material and plastic fabricating processes *Will help readers understand the performance of plastics *Helps readers to make decisions which meet performance requirements and to keep costs low
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Fantastic Plastic written by Susan T. I. Mossman and published by Black Dog Pub Limited. This book was released on 2008 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fantastic Plastic provides a fascinating look at how designs using plastics can be considered works of art, as well as objects of our everyday lives. Within Fantastic Plastic the material is explored, from the high end of furniture and product design, to the throwaway, disposable world of condoms and plastic bags. Fantastic Plastic shows how product design has developed and considers plastics' usability, technology and appearance. From the trademarked names of Spandex, Teflon, Nylon, Rayon, Formica and Tupperware, this book follows plastic through its iconic incarnations and reflects on how their function and reputation have changed over their lifetime.
Download or read book Introduction to Plastics Engineering written by Anshuman Shrivastava and published by William Andrew. This book was released on 2018-05-15 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. Provides a single unified reference covering plastics materials, properties, design, processing and applications Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product Serves as an ideal introductory book for new plastics engineers and students of plastics engineering Provides a convenient reference for more experienced practitioners
Download or read book Designing with Plastics and Composites A Handbook written by Donald Rosato and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.
Download or read book Design Data for Reinforced Plastics written by R.M. Mayer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors have assembled a systematic set of design parameters describing short and long term mechanical, thermal, electrical, fire and environmental performance, etc. for composites based primarily on continuous glass, aramid and carbon fibres in thermosetting and thermoplastic matrices.
Download or read book Plastics written by Harold Belofsky and published by Hanser Gardner Publications. This book was released on 1995 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook integrates product design with a study of mechanical and physical properties, processing machinery and tooling, and materials and process selection. For undergraduate mechanical engineering courses, it includes examples and problems.
Download or read book Plastic Part Design for Injection Molding written by Robert A. Malloy and published by . This book was released on 2011 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.
Download or read book Transparent Plastics written by Simone Jeska and published by Springer Science & Business Media. This book was released on 2007-10-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fascinating guide to building with transparent plastics. Prominent international avant-garde architects such as Shigeru Ban and Herzog & de Meuron frequently use transparent plastic for their structures. Transparent plastic seems ephemeral and thus captures the spirit of the times.
