Download or read book Processing of Macroporous Ceramics Through Ceramic polymer Dispersion Methods written by Nancy Marie Wara and published by . This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.

Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-06-27 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the properties critical to the engineering applications of ceramics are strongly dependent on their microstructure which, in turn, is dependent on the processing methods used to produce the ceramic material. Ceramic Processing, Second Edition provides a comprehensive treatment of the principles and practical methods used in producing ceramics with controlled microstructure. Covering the main steps in the production of ceramics from powders, the book also provides succinct coverage of other methods for fabricating ceramics, such as sol−gel processing, reaction bonding, chemical vapor deposition and polymer pyrolysis. While maintaining the objectives of the successful first edition, this new edition has been revised and updated to include recent developments and expanded to feature new chapters on additives used in ceramic processing; rheological properties of suspensions, slurries, and pastes; granulation, mixing, and packing of particles; and sintering theory and principles. Intended as a textbook for undergraduate and graduate courses in ceramic processing, the book also provides an indispensable resource for research and development engineers in industry who are involved in the production of ceramics or who would like to develop a background in the processing of ceramics.

Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.

Download or read book Fundamentals of Ceramic Powder Processing and Synthesis written by Terry A. Ring and published by Elsevier. This book was released on 1996-04-30 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic powder synthesis and processing are two of the most important technologies in chemical engineering and the ceramics-related area of materials science. This book covers both the processing and the synthesis ofceramic powders in great depth and is indeed the only up-to-date, comprehensive source on the subject available.The application of modern scientific and engineering methods to the field of ceramic powder synthesis has resulted in much greater control of properties. Fundamentals of Ceramic Powder Processing and Synthesis presents examples of these modern methods as they apply to ceramic powders. The book is organized to describe the natural and synthetic raw materials that comprise contemporary ceramics. It covers the three reactant processes used in synthetic ceramic powder synthesis: solid, liquid, andgas.Ceramic powder processing, as a field of materials processing, is undergoing rapid expansion. The present volume is intended as a complete and useful source on this subject of great current interest. It provides comprehensive coverage from a strong chemistry and chemical engineering perspective and is especially applicable to materials scientists, chemical engineers, and applied chemists. Key Features* The most complete and updated reference source on the subject* Comprehensive coverage from a stron chemical engineering and chemistry perspective* Emphasis on both natural and synthetic raw materials in ceramic powder synthesis* Information on reaction kinetics* Superior, more comprehensive coverage than that in existing texts* Sample problems and exercises* Problems at the end of each chapter which supplement the material

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Emergent Process Methods for High Technology Ceramics written by Robert F. Davis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the November 8-10, 1982 Conference on EMERGENT PROCESS METHODS FOR HIGH TECHNOLOGY CERAMICS, held at North Carolina State University in Raleigh. It was the nineteenth in a series of "University Conferences on Ceramic Sci ence" initiated in 1964 by four institutions of which North Carolina State University is a charter member, along with the University of California at Berkeley, Notre Dame University, and the New York State College of Ceramics at Alfred University. More recently, ceramic oriented faculty in departments at the Pennsylvania State University and Case-Western Reserve University have joined the four initial institutions as permanent members of the consortium. These research oriented conferences, each uniquely concerned with a timely ceramic theme, have been well attended by audiences which typically were both international and interdisciplinary in character; their published Proceedings have been well received and are frequently cited. This three day conference addressed the fundamental scientific background as well as the technological state-of-the-art of several novel methods which are beginning to influence present and future directions for non-traditional ceramic processing, thus affecting many of the advanced ceramic materials needed for a wide variety of research and industrial applications. The number, the importance and the application of new ceramic processing techniques have expanded considerably during the last ten years.

Download or read book Handbook of Advanced Ceramics written by Tatsuki Ohji and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Processing and Manufacturing of Advanced Ceramics and Composites II written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains collection of papers from the below symposia held during the 10th Pacific Rim Conference on Ceramic and Glass Technology (PacRim10), June 2-7, 2013, in Coronado, California 2012: Novel, Green, and Strategic Processing and Manufacturing Technologies Polymer Derived Ceramics and Composites Advanced Powder Processing and Manufacturing Technologies Synthesis and Processing of Materials Using Electric Fields/Currents

Download or read book Nanobiomaterials Handbook written by Balaji Sitharaman and published by CRC Press. This book was released on 2016-04-19 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiomaterials exhibit distinctive characteristics, including mechanical, electrical, and optical properties, which make them suitable for a variety of biological applications. Because of their versatility, they are poised to play a central role in nanobiotechnology and make significant contributions to biomedical research and healthcare. Nanobio

Download or read book Colloidal Ceramic Processing of Nano Micro and Macro Particulate Systems written by Wei-Heng Shih and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal processing has always been a major processing method. It facilitates control of particle interactions through a wide variety of schemes, which include surface coating, dispersion additives, and solvent control, among others. Controlling particle interactions also permits better resultant rheology and controlled green microstructures via a wide range of forming methods. In recent years, the particle size involved has been broadened into both the nanometer and the larger than micrometer ranges. This book covers fundamental issues encountered in colloidal processing nano-(less than 0.1 micron), micro-(from 0.1 to 5 micron) and macro-(larger than 5 micron) particulate systems and at the same time explore applications for these developments. Proceedings of the symposium held at the 105th Annual Meeting of The American Ceramic Society, April 27-30, in Nashville, Tennessee; Ceramic Transactions, Volume 152.

Download or read book Advanced Ceramic Processing and Technology written by J. Binner and published by Noyes Data Corporation/Noyes Publications. This book was released on 1990-01-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics and ceramic matrix composites continue to find increasing use in modern technological applications as ever more stringent demands are placed upon materials' properties. While advanced ceramics and ceramic composites have many potentially useful properties, they can be extremely difficult to fabricate. This book contains a series of independent chapters focusing on different aspects of ceramics processing. The views of leading experts on a number of ceramics processing options and the direction of which their field is taking. Aimed at the materials engineer, this book is a wonderful reference as well as a guide to expanding the knowledge of processing techniques and their underlying philosophies.

Download or read book Chemical Processing of Ceramics written by Burtrand Lee and published by CRC Press. This book was released on 2005-07-15 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many believe that the silicon/information age is heading to the Age of Biology and that the next frontier in ceramics will most likely require molecular level or nanoscale control. What, then, is the role of ceramics in the age of biology? As we change from an energy-rich society to an energy-declining society, how can ceramic materials appease the

Download or read book Science of Ceramic Chemical Processing written by Larry L. Hench and published by Wiley-Interscience. This book was released on 1986-04-24 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of producing ceramic, glass, and composite materials using chemistry-based processing methods. Synthesizes the most up-to-date research. Includes new areas of computer aided processing, molecular calculations of ceramic processing reactions, and chemical control of surface films. Contributions from over 115 experts in the field. Index.

Download or read book Advanced Ceramic Processing written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2015-11-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic oxides typically have a combination of properties that make them attractive for many applications compared with other materials. This book attempts to compile, unify, and present a recent development for the production techniques, such as electrochemical, foaming, and microwave sintering, of rare earth ceramic oxide materials. This book presents leading-edge research in this field from around the world. Although there is no formal partition of the book, the chapters cover several preparation methods for ceramic oxides, especially for coating and electrical applications. In addition, a fabrication foaming technique for porous ceramics with tailored microstructure along with distinctive properties is provided. The information provided in this book is very useful for a board of scientists and engineers from both academia and industry.

Download or read book Ceramic Processing written by R.A. Terpstra and published by Springer Science & Business Media. This book was released on 1995-07-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Processing of Crystalline Ceramics written by Hare and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the November 7-9, 1977 Conference on PROCESSING OF CRYSTALLINE CERAMICS, held at North Carolina State University in Raleigh. It was the Fourteenth in a series of "University Conferences on Ceramic Science" initiated in 1964 and still coordinated by a founding group of four ceramic related institutions, of which North Carolina State University is a charter member, along with the University of California at Berkeley, Notre Dame University, and the New York State College of Ceramics at Alfred University. In addition, two other ceramic-oriented schools, the University of Florida and Case-Western Reserve University, have also hosted Conferences in the series. These research-oriented conferences, each uniquely concerned with a timely ceramic theme, have been well attended by audiences which typically were both inter national and interdisciplinary in character; their published Proceedings have been well received and are frequently cited. This three day conference was concerned with (a) scientific aspects of all process steps which must be combined and controlled effectively and sequentially in producing crystalline ceramics (both oxides and nonoxides), and (b) utilization of these principles in developing processes for several classes of advanced ceramics critical to present and future technology.