Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 3, Procedures and Applications includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Nuclear Reactor Thermal Hydraulics and Other Applications written by Donna Guillen and published by BoD – Books on Demand. This book was released on 2013-02-13 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from researchers around the world on numerical developments and applications to predict fluid flow and heat transfer, with an emphasis on thermal hydraulics computational fluid dynamics. Our ability to simulate larger problems with greater fidelity has vastly expanded over the past decade. The collection of material presented in this book augments the ever-increasing body of knowledge concerning the important topic of thermal hydraulics. Featured topics include coolant channel analysis, thermal hydraulic transport and mixing, as well as hydrodynamics and heat transfer processes. The contents of this book will interest researchers, scientists, engineers and graduate students.
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors written by Ferry Roelofs and published by Woodhead Publishing. This book was released on 2018-11-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics Aspects of Liquid Metal cooled Nuclear Reactors is a comprehensive collection of liquid metal thermal hydraulics research and development for nuclear liquid metal reactor applications. A deliverable of the SESAME H2020 project, this book is written by top European experts who discuss topics of note that are supplemented by an international contribution from U.S. partners within the framework of the NEAMS program under the U.S. DOE. This book is a convenient source for students, professionals and academics interested in liquid metal thermal hydraulics in nuclear applications. In addition, it will also help newcomers become familiar with current techniques and knowledge. - Presents the latest information on one of the deliverables of the SESAME H2020 project - Provides an overview on the design and history of liquid metal cooled fast reactors worldwide - Describes the challenges in thermal hydraulics related to the design and safety analysis of liquid metal cooled fast reactors - Includes the codes, methods, correlations, guidelines and limitations for liquid metal fast reactor thermal hydraulic simulations clearly - Discusses state-of-the-art, multi-scale techniques for liquid metal fast reactor thermal hydraulics applications
Download or read book Process and Plant Safety written by Jürgen Schmidt and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe operation of plants is of paramount importance in the chemical, petrochemical and pharmaceutical industries. Best practice in process and plant safety allows both the prevention of hazards and the mitigation of consequences. Safety Technology is continuously advancing to new levels and Computational Fluid Dynamics (CFD) is already successfully established as a tool to ensure the safe operation of industrial plants. With CFD tools, a great amount of knowledge can be gained as both the necessary safety measures and the economic operation of plants can be simultaneously determined. Young academics, safety experts and safety managers in all parts of the industry will henceforth be forced to responsibly judge these new results from a safety perspective. This is the main challenge for the future of safety technology. This book serves as a guide to elaborating and determining the principles, assumptions, strengths, limitations and application areas of utilizing CFD in process and plant safety, and safety management. The book offers recommendations relating to guidelines, procedures, frameworks and technology for creating a higher level of safety for chemical and petrochemical plants. It includes modeling aids and concrete examples of industrial safety measures for hazard prevention.
Download or read book Summary Review on the Application of Computational Fluid Dynamics in Nuclear Power Plant Design written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-03-28 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication documents the results of an IAEA coordinated research project (CRP)on the application of computational fluid dynamics (CFD) codes for nuclear power plant design. The main objective was to benchmark CFD codes, model options and methods against CFD experimental data under single phase flow conditions. This publication summarizes the current capabilities and applications of CFD codes, and their present qualification level, with respect to nuclear power plant design requirements. It is not intended to be comprehensive, focusing instead on international experience in the practical application of these tools in designing nuclear power plant components and systems. The guidance in this publication is based on inputs provided by international nuclear industry experts directly involved in nuclear power plant design issues, CFD applications, and in related experimentation and validation highlighted during the CRP.
Download or read book Best Estimate Safety Analysis for Nuclear Power Plants written by and published by . This book was released on 2008 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterministic safety analysis is an important tool for confirming the adequacy and efficiency of provisions within the defence in depth concept for the safety of nuclear power plants (NPPs). IAEA Safety Standards Series No. NS-R-1.2 and Safety Reports Series No. 23 recommend, as one of the options for demonstrating the inclusion of adequate safety margins, the use of best estimate computer codes with realistic input data in combination with the evaluation of uncertainties in the calculation results. The evaluation of uncertainties is an issue of considerable complexity, and this Safety Report has been developed to complement the existing publications. It provides more detailed information on the methods available for the evaluation of uncertainties in deterministic safety analysis of NPPs and practical guidance in the use of these methods.
Download or read book Safety Margins of Operating Rectors written by M. Antila and published by International Atomic Energy Agency. This book was released on 2003 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This TECDOC deals with a basic concept of safety margins and their role in assuring safety of nuclear Installations. The document describes capabilities of thermal hydraulic computer codes used to determine safety margins, evaluation of uncertainties, methods for safety margin evaluation and utilization of safety margins in operation and modifications of nuclear power plants.
Download or read book Design basis Accident Analysis Methods For Light water Nuclear Power Plants written by Robert Martin and published by World Scientific. This book was released on 2019-02-13 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the principles of safety evaluation as practiced in the regulated light-water reactor nuclear industry, as established and stabilized over the last 30 years. It is expected to serve both the current industry and those planning for the future. The work's coverage of the subject matter is the broadest to date, including not only the common topics of modeling and simulation, but also methods supporting the basis for the underlying assumptions, the extension to radiological safety, what to expect in a licensing review, historical perspectives and the implication for new designs.This text is an essential resource for practitioners and students, on the current best-practices in nuclear power plant safety and their basis. Contributors of this work are subject matter experts in their specialties, much of which was nurtured and inspired by Prof. Larry Hochreiter, a prominent nuclear safety pioneer.Related Link(s)
Download or read book Fundamentals of Computational Fluid Dynamics written by H. Lomax and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chosen semi-discrete approach of a reduction procedure of partial differential equations to ordinary differential equations and finally to difference equations gives the book its distinctiveness and provides a sound basis for a deep understanding of the fundamental concepts in computational fluid dynamics.
Download or read book Air Pollution and Control written by Nikhil Sharma and published by Springer. This book was released on 2017-12-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on various aspects related to air pollution, including major sources of air pollution, measurement techniques, modeling studies and solution approaches to control. The book also presents case studies on measuring air pollution in major urban areas, such as Delhi, India. The book examines vehicles as a source of air pollution and addresses the quantitative analysis of engine exhaust emissions. Subsequent chapters discuss particulate matter from engines and coal-fired power plants as a major pollutant, as well as emission control techniques using various after treatment systems. The book’s final chapter considers future perspectives and a way forward for sustainable development. It also discusses several emission control techniques that will gain relevance in the future, when stricter emission norms will be enforced for international combustion (IC) engines as well as power plants. Given its breadth of coverage, the book will benefit a wide variety of readers, including researchers, professionals, and policymakers.
Download or read book CFD Applications in Nuclear Engineering written by Wenxi Tian and published by Frontiers Media SA. This book was released on 2023-08-21 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: High fidelity nuclear reactor thermal hydraulic simulations are a hot research topic in the development of nuclear engineering technology. The three-dimensional Computational Fluid Dynamics (CFD) and Computational Multi-phase Fluid Dynamics (CMFD) methods have attracted significant attention in predicting single-phase and multi-phase flows under steady-state or transient scenarios in the field of nuclear reactor engineering. Compared with three-dimensional thermal hydraulic methods, the traditional one-dimensional system analysis method contains inherent defects in the required accuracy and spatial resolution for a number of important nuclear reactor thermal-hydraulic phenomena. At present the CFD method has been widely adopted in the nuclear industry, across both light water reactors and liquid metal cooled fast reactors, providing an effective solution for complex issues of thermal hydraulic analysis. However, the CFD method employs empirical models for turbulence simulation, heat transfer, multi-phase interaction and chemical reactions. Such models must be validated before they can be used with confidence in nuclear reactor applications. In addition, user practice guidelines play a critical role in achieving reliable results from CFD simulations.
Download or read book Pressurized Heavy Water Reactors written by Jovica Riznic and published by Elsevier. This book was released on 2021-10-02 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressurized Heavy Water Reactors: Atucha-II, the eighth volume in the JSME Series on Thermal and Nuclear Power Generation, provides a comprehensive and complete review of a single type of reactor in a very accessible and practical way. The book presents a close analysis of the Atucha reactor, covering reactor physics, aging management of major components, and the role of codes in PHWR and Nuclear Regulation and Licensing. Including contemporary capabilities and challenges of nuclear technology, the book offers solutions and advice on common problems faced, guiding the reader through safe and approved processes that will help them reach suitable solutions. Professionals involved in lifecycle assessments and researchers interested in the development and improvement of nuclear energy technologies will gain a deep understanding of PHWR nuclear reactor physics, design and licensing. - A comprehensive reference on the latest research on Atucha Pressurized Heavy Water Reactors and their impact on sustainability goals - Analyzes The Atucha-2 BEPU and LBLOCA - Considers the licensing of Atucha-2, its physics and aging management of major components
Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi
Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-11 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants.
Download or read book Engineering Mechanics 2015 written by Cyril Fischer and published by Trans Tech Publications Ltd. This book was released on 2016-01-11 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Engineering Mechanics 2015, May 11-14, 2015, Svratka, Czech Republic
