Download or read book Processable Precursors to High Performance Liquid Crystalline Polymers written by and published by . This book was released on 1992 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processable precursor polymers to aramids, poly(imino1,4- phenyleneiminocarbonyl-1,4 phenylenecarbonyl) and poly(imino-1,3- phenyleneiminocarbonyl-1,4-phenylenecarbonyl), were prepared and studied. The precursor polymers were made from the reaction of 2,5-dichlorobicyclo2.2. 2octane-1,4dicarbonyl chloride or 2,5diacetoxybicyclo2.2.2octane-1,4- dicarboxylic acid. The polymeric precursors were subsequently converted in approximately 98% - 100% yields, via dehdrohalogenation and retro Diels-Alder reactions to the corresponding aramids by refluxing in 1M solution of potassium hydroxide or sodium hydroxide, or by bulk pyrolysis using aromatization catalysts, such as, ZnCl 2 and dichlorobenzene sulfonic acid. Only the p- phenylene precursor polymer exhibited liquid crystal characteristics in solution. Thermal properties were examined and tensile properties will be determined In a future study.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book High Performance Structural Fibers for Advanced Polymer Matrix Composites written by National Research Council and published by National Academies Press. This book was released on 2005-06-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military use of advanced polymer matrix composites (PMC)â€"consisting of a resin matrix reinforced by high-performance carbon or organic fibersâ€"while extensive, accounts for less that 10 percent of the domestic market. Nevertheless, advanced composites are expected to play an even greater role in future military systems, and DOD will continue to require access to reliable sources of affordable, high-performance fibers including commercial materials and manufacturing processes. As a result of these forecasts, DOD requested the NRC to assess the challenges and opportunities associated with advanced PMCs with emphasis on high-performance fibers. This report provides an assessment of fiber technology and industries, a discussion of R&D opportunities for DOD, and recommendations about accelerating technology transition, reducing costs, and improving understanding of design methodology and promising technologies.

Download or read book High performance Polymers written by Guy Rabilloud and published by . This book was released on 1997 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the current status of high performance polymers, in particular polyimides, in the electronics industry. Overviews polymers used for optical lithography, semiconductor encapsulation, packaging, flexible circuitry, and conformal coatings, then examines development of new polyimides for their electrical and optical properties, adhesive strength, thermal expansion, and moisture and solvent diffusion. A chapter is devoted to chemistry of negative and positive photosensitive polyimides. Attention is also paid to process parameters used for deposition techniques, cure cycles, and etching methods. Rabilloud is affiliated with the Centre d'etudes des materiaux organiques pour les technologies avancees. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Historically Black Colleges and Universities and Minority Institutions written by and published by . This book was released on 1994 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Crystalline Polymers written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1990-02-01 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concise Polymeric Materials Encyclopedia written by Joseph C. Salamone and published by CRC Press. This book was released on 1998-08-28 with total page 1782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise Polymeric Materials Encyclopedia culls the most used, widely applicable articles from the Polymeric Materials Encyclopedia - more than 1,100 - and presents them to you in a condensed, well-ordered format. Featuring contributions from more than 1,800 scientists from all over the world, the book discusses a vast array of subjects related to the: synthesis, properties, and applications of polymeric materials development of modern catalysts in preparing new or modified polymers modification of existing polymers by chemical and physical processes biologically oriented polymers This comprehensive, easy-to-use resource on modern polymeric materials serves as an invaluable addition to reference collections in the polymer field.

Download or read book Liquid Crystalline Polymer Systems written by Avraam I. Isayev and published by . This book was released on 1996 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive report on the synthesis, structure, rheology, processing, performance, and applications of liquid-crystalline polymers (LCPs). Discusses self-reinforced composites prepared through the melt processing of thermoplastics and thermotropic LCPs. Addresses current research efforts in making polymer-dispersed liquid crystals. Reports recent studies on the structure and phase behavior of mesophases. Describes the synthesis and properties of new main-chain and side-chain liquid-crystalline block copolymers, mesogen-jacketed LCPs, and liquid-crystalline thermosets.

Download or read book Rheology and Processing of Liquid Crystal Polymers written by Domenico Acierno and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have many strange properties that may be utilized to advantage in the processing of products made from them and their blends with isotropic polymers. This volume (volume 2 in the series Polymer Liquid Crystals) deals with their strange flow behaviour and the models put forward to explain the phenomena that occur in such polymers and their blends. It has been known for some time that small ad ditions of a thermotropic LCP to isotropic polymers not only gives an improvement in the strength and stiffness of the blend but improves the processability of the blend over that of the isotropic polymer. In the case of lyotropic LCPs, it is possible to create a molecular composite in which the reinforcement of an isotropic polymer is achieved at a molecular level by the addition of the LCP in a common solvent. If the phenomena can be fully understood both the reinforcement and an increase in the proces sability of isotropic polymers could be optimized. This book is intended to illustrate the current theories associated with the flow of LCPs and their blends in the hope that such an optimization will be achieved by future research. Chapter 1 introduces the subject of LCPs and describes the ter minology used; Chapter 2 then discusses the more complex phenomena associated with these materials. In Chapter 3, the way in which these phe nomena may be modelled using hamiltonians is fully covered.

Download or read book High Performance Polymers written by Johannes Karl Fink and published by William Andrew. This book was released on 2014-07-04 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approaching the material from a chemistry and engineering perspective, High Performance Polymers presents the most reliable and current data available about state-of-the-art polymerization, fabrication, and application methods of high performance industrial polymers. Chapters are arranged according to the chemical constitution of the individual classes, beginning with main chain carbon-carbon polymers and leading to ether-containing, sulfur-containing, and so on. Each chapter follows an easily readable template, provides a brief overview and history of the polymer, and continues on to such sub-topics as monomers; polymerization and fabrication; properties; fabrication methods; special additives; applications; suppliers and commercial grades; safety; and environmental impact and recycling. High Performance Polymers brings a wealth of up-to-date, high performance polymer data to you library, in a format that allows for either a fast fact-check or more detailed study. In this new edition the data has been fully updated to reflect all developments since 2008, particularly in the topics of monomers, synthesis of polymers, special polymer types, and fields of application. Presents the state-of-the-art polymerization, fabrication and application methods of high performance industrial polymers Provides fundamental information for practicing engineers working in industries that develop advanced applications (including electronics, automotive and medical) Discusses environmental impact and recycling of polymers

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-10 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Processing and Properties of Liquid Crystalline Polymers and LCP Based Blends written by Domenico Acierno and published by ChemTec Publishing. This book was released on 1993 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some papers in this book report on the most recent developments in pure liquid crystalline polymers showing that discipline is dynamic and may offer in the future numerous other opportunities not known today. We hope that our selections of papers will be interesting for specialists in polymer chemistry, blends, and their industrial application, and that information included in this book will be stimulating and will favorably impact research currently performed by the readers of this book.

Download or read book Liquid crystalline Polymers written by American Chemical Society. Meeting and published by . This book was released on 1990 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the creation, study, and processing of new liquid-crystalline polymers. It covers not only the chemistry of liquid-crystalline polymers, but also the physics and engineering aspects of these materials. A wide range of topics is covered, including syntheses of main-chain and side-chain LCPs, structural characterization of LP, rheology and processing, and applications such a electro-optics and "self-reinforcing" blends. This book presents a broad view of the direction of LCP research in both industry and academe.

Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1994 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models

Download or read book Kirk Othmer Concise Encyclopedia of Chemical Technology 2 Volume Set written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 2762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily-accessible two-volume encyclopedia summarizing all the articles in the main volumes Kirk-Othmer Encyclopedia of Chemical Technology, Fifth Edition organized alphabetically. Written by prominent scholars from industry, academia, and research institutions, the Encyclopedia presents a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field.

Download or read book American Society for Composites written by Michael Hyer and published by DEStech Publications, Inc. This book was released on 2011-06-28 with total page 2760 pages. Available in PDF, EPUB and Kindle. Book excerpt: