Download or read book Process Monitoring Diagnostics and Prognostics in MacHining Processes written by Fatih Camci and published by LAP Lambert Academic Publishing. This book was released on 2010-01 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition-Based Maintenance (CBM) technology increases system availability and safety while reducing costs, attributed to reduced maintenance and inventory, increased capacity, and enhanced logistics and supply chain performance. Employing effective generic process monitoring methods for abrupt failures and diagnostics and prognostics algorithms for incipient failures is an important prerequisite for widespread deployment of CBM. Diagnostics is the process of identifying, localizing and determining severity of a machine failure, whereas prognostics is the process of estimating the remaining-useful-life (RUL). This work presents methods based on support vector machines and hidden Markov models to diagnose abrupt and incipient failures and to estimate the RUL. The presented methods have the ability to handle non- stationary processes. There exist three major goals of this work: detecting abrupt failures (process monitoring), identifying the state of incipient failures (health state estimation) and estimating RUL of the machine (prognostics).
Download or read book Diagnostics and Prognostics of Engineering Systems Methods and Techniques written by Kadry, Seifedine and published by IGI Global. This book was released on 2012-09-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Prognostics predicts an industrial systems lifespan using probability measurements to determine the way a machine operates. Prognostics are essential in determining being able to predict and stop failures before they occur. Therefore the development of dependable prognostic procedures for engineering systems is important to increase the systems performance and reliability. Diagnostics and Prognostics of Engineering Systems: Methods and Techniques provides widespread coverage and discussions on the methods and techniques of diagnosis and prognosis systems. Including practical examples to display the methods effectiveness in real-world applications as well as the latest trends and research, this reference source aims to introduce fundamental theory and practice for system diagnosis and prognosis.
Download or read book COMPRAIL written by C. A. Brebbia and published by WIT Press. This book was released on 2016-12-14 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented in this volume aim to update the use of advanced systems, promoting their general awareness throughout the management, design, manufacture and operation of railways and other emerging passenger, freight and transit systems. The book particularly emphasizes the use of computer systems in advanced railway engineering.Topics covered include: Communications and signalling; Operations quality; Energy supply and consumption; Monitoring and maintenance; Computer simulations Planning and policy; Operational planning; Safety and security; Rescheduling; Timetable planning.
Download or read book Analysis and Synthesis of Fault Tolerant Control Systems written by Magdi S. Mahmoud and published by John Wiley & Sons. This book was released on 2013-10-28 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, control systems have become more sophisticated in order to meet increased performance and safety requirements for modern technological systems. Engineers are becoming more aware that conventional feedback control design for a complex system may result in unsatisfactory performance, or even instability, in the event of malfunctions in actuators, sensors or other system components. In order to circumvent such weaknesses, new approaches to control system design have emerged which can tolerate component malfunctions while maintaining acceptable stability and performance. These types of control systems are often known as fault-tolerant control systems (FTCS). More precisely, FTCS are control systems which possess the ability to accommodate component failure automatically. Analysis and Synthesis of Fault-Tolerant Control Systems comprehensively covers the analysis and synthesis methods of fault tolerant control systems. It unifies the methods for developing controllers and filters for a wide class of dynamical systems and reports on the recent technical advances in design methodologies. MATLAB® is used throughout the book, to demonstrate methods of analysis and design. Key features: • Provides advanced theoretical methods and typical practical applications • Provides access to a spectrum of control design methods applied to industrial systems • Includes case studies and illustrative examples • Contains end-of-chapter problems Analysis and Synthesis of Fault-Tolerant Control Systems is a comprehensive reference for researchers and practitioners working in this area, and is also a valuable source of information for graduates and senior undergraduates in control, mechanical, aerospace, electrical and mechatronics engineering departments.
Download or read book Industrial Internet of Things written by Sabina Jeschke and published by Springer. This book was released on 2016-10-12 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the core system science needed to enable the development of a complex industrial internet of things/manufacturing cyber-physical systems (IIoT/M-CPS). Gathering contributions from leading experts in the field with years of experience in advancing manufacturing, it fosters a research community committed to advancing research and education in IIoT/M-CPS and to translating applicable science and technology into engineering practice. Presenting the current state of IIoT and the concept of cybermanufacturing, this book is at the nexus of research advances from the engineering and computer and information science domains. Readers will acquire the core system science needed to transform to cybermanufacturing that spans the full spectrum from ideation to physical realization.
Download or read book Model based Health Monitoring of Hybrid Systems written by Danwei Wang and published by Springer Science & Business Media. This book was released on 2013-05-23 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents a comprehensive framework and effective techniques for in-depth analysis, clear design procedure, and efficient implementation of diagnosis and prognosis algorithms for hybrid systems. It offers an overview of the fundamentals of diagnosis\prognosis and hybrid bond graph modeling. This book also describes hybrid bond graph-based quantitative fault detection, isolation and estimation. Moreover, it also presents strategies to track the system mode and predict the remaining useful life under multiple fault condition. A real world complex hybrid system—a vehicle steering control system—is studied using the developed fault diagnosis methods to show practical significance. Readers of this book will benefit from easy-to-understand fundamentals of bond graph models, concepts of health monitoring, fault diagnosis and failure prognosis, as well as hybrid systems. The reader will gain knowledge of fault detection and isolation in complex systems including those with hybrid nature, and will learn state-of-the-art developments in theory and technologies of fault diagnosis and failure prognosis for complex systems.
Download or read book Intelligent Diagnosis and Prognosis of Industrial Networked Systems written by Chee Khiang Pang and published by CRC Press. This book was released on 2017-07-28 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an era of intense competition where plant operating efficiencies must be maximized, downtime due to machinery failure has become more costly. To cut operating costs and increase revenues, industries have an urgent need to predict fault progression and remaining lifespan of industrial machines, processes, and systems. An engineer who mounts an acoustic sensor onto a spindle motor wants to know when the ball bearings will wear out without having to halt the ongoing milling processes. A scientist working on sensor networks wants to know which sensors are redundant and can be pruned off to save operational and computational overheads. These scenarios illustrate a need for new and unified perspectives in system analysis and design for engineering applications. Intelligent Diagnosis and Prognosis of Industrial Networked Systems proposes linear mathematical tool sets that can be applied to realistic engineering systems. The book offers an overview of the fundamentals of vectors, matrices, and linear systems theory required for intelligent diagnosis and prognosis of industrial networked systems. Building on this theory, it then develops automated mathematical machineries and formal decision software tools for real-world applications. The book includes portable tool sets for many industrial applications, including: Forecasting machine tool wear in industrial cutting machines Reduction of sensors and features for industrial fault detection and isolation (FDI) Identification of critical resonant modes in mechatronic systems for system design of R&D Probabilistic small-signal stability in large-scale interconnected power systems Discrete event command and control for military applications The book also proposes future directions for intelligent diagnosis and prognosis in energy-efficient manufacturing, life cycle assessment, and systems of systems architecture. Written in a concise and accessible style, it presents tools that are mathematically rigorous but not involved. Bridging academia, research, and industry, this reference supplies the know-how for engineers and managers making decisions about equipment maintenance, as well as researchers and students in the field.
Download or read book Smart Machining Systems written by Kunpeng Zhu and published by Springer Nature. This book was released on 2021-11-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the tools to enhance the precision, automation and intelligence of modern CNC machining systems. Based on a detailed description of the technical foundations of the machining monitoring system, it develops the general idea of design and implementation of smart machining monitoring systems, focusing on the tool condition monitoring system. The book is structured in two parts. Part I discusses the fundamentals of machining systems, including modeling of machining processes, mathematical basics of condition monitoring and the framework of TCM from a machine learning perspective. Part II is then focused on the applications of these theories. It explains sensory signal processing and feature extraction, as well as the cyber-physical system of the smart machining system. Its utilisation of numerous illustrations and diagrams explain the ideas presented in a clear way, making this book a valuable reference for researchers, graduate students and engineers alike.
Download or read book Methods to Assess and Manage Process Safety in Digitalized Process System written by Faisal Khan and published by Academic Press. This book was released on 2022-07-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods to Assess and Manage Process Safety in Digitalized Process System, Volume Six, the latest release in the Methods in Chemical Process Safety series, highlights new advances in the field, with this new volume presenting interesting chapters written by an international board of authors. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Methods in Chemical Process Safety series Provides the authority and expertise of leading contributors from an international board of authors
Download or read book Identifying Product and Process State Drivers in Manufacturing Systems Using Supervised Machine Learning written by Thorsten Wuest and published by Springer. This book was released on 2015-04-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on a novel approach for holistically identifying the relevant state drivers of complex, multi-stage manufacturing systems. This approach is able to utilize complex, diverse and high-dimensional data sets, which often occur in manufacturing applications, and to integrate the important process intra- and interrelations. The approach has been evaluated using three scenarios from different manufacturing domains (aviation, chemical and semiconductor). The results, which are reported in detail in this book, confirmed that it is possible to incorporate implicit process intra- and interrelations on both a process and programme level by applying SVM-based feature ranking. In practice, this method can be used to identify the most important process parameters and state characteristics, the so-called state drivers, of a manufacturing system. Given the increasing availability of data and information, this selection support can be directly utilized in, e.g., quality monitoring and advanced process control. Importantly, the method is neither limited to specific products, manufacturing processes or systems, nor by specific quality concepts.
Download or read book Advanced Computational Techniques for Renewable Energy Systems written by Mustapha Hatti and published by Springer Nature. This book was released on 2023-02-13 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, one hundred selected articles, in which the technology and science elite share, contribute to technology development, collaborate and evolve the latest cutting-edge technologies, open ecosystem resources, new innovative computing solutions, hands-on labs and tutorials, networking and community building, to ensure better integration of artificial intelligence into renewable energy systems. Innovation in computing continues at a growing pace. The key to success in this area is not only hardware, but also the ability to leverage rapid advances in artificial intelligence (including machine learning and deep learning), data analytics, data streaming, and cloud computing, which go hand in hand with intensive research activity on the underlying computational methods. The chapters in this book are organized into thematic sections on: advanced computing techniques; artificial intelligence; smart and sustainable cities; renewable energy systems; materials in renewable energy; smart energy efficiency; smart cities applications: recent developments and new trends; online, supervision of renewable energy platforms; predictive control in renewable systems; smart embedded systems for photovoltaic applications.
Download or read book Artificial Intelligence in Models Methods and Applications written by Olga Dolinina and published by Springer Nature. This book was released on 2023-04-24 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the accepted research papers presented in the International Conference "Artificial Intelligence in Engineering & Science" (AIES-2022). The aim of the AIES Conference is to bring together researchers involved in the theory of computational intelligence, knowledge engineering, fuzzy systems, soft computing, machine learning and related areas and applications in engineering, bioinformatics, industry, medicine, energy, smart city, social spheres and other areas. This book presents new perspective research results: models, methods, algorithms and applications in the field of Artificial Intelligence (AI). Particular emphasis is given to the medical applications - medical images recognition, development of the expert systems which could be interesting for the AI researchers as well for the physicians looking for the new ideas in medicine. The central audience of the book are researchers, industrial practitioners, students specialized in the Artificial Intelligence.
Download or read book Cloud Based Cyber Physical Systems in Manufacturing written by Lihui Wang and published by Springer. This book was released on 2017-11-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research, challenges and solutions in the area of cloud-based cyber-physical systems (CPS) used in manufacturing. It provides a comprehensive review of the literature and an in-depth treatment of novel methodologies, algorithms and systems in the area of architecture design, cyber security, process planning, monitoring and control. The book features detailed descriptions of how to derive solutions in a cloud environment where physical machines can be supported by cyber decision systems when engaged in real operations. It presents a range of novel ideas and is characterized by a balanced approach in terms of scope vs. depth and theory vs. applications. It also takes into account the need to present intellectual challenges while appealing to a broad readership, including academic researchers, practicing engineers and managers, and graduate students. Dedicated to the topic of cloud-based CPS and its practical applications in manufacturing, this book benefits readers from all manufacturing sectors, from system design to lifecycle engineering and from process planning to machine control. It also helps readers to understand the present challenges and future research directions towards factories of the future, helping them to position themselves strategically for career development.
Download or read book Artificial Intelligence in Manufacturing written by Masoud Soroush and published by Elsevier. This book was released on 2024-01-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Manufacturing: Concepts and Methods explains the most successful emerging techniques for applying AI to engineering problems. Artificial intelligence is increasingly being applied to all engineering disciplines, producing more insights into how we understand the world and allowing us to create products in new ways. This book unlocks the advantages of this technology for manufacturing by drawing on work by leading researchers who have successfully developed methods that can apply to a range of engineering applications. The book addresses educational challenges needed for widespread implementation of AI and also provides detailed technical instructions for the implementation of AI methods. Drawing on research in computer science, physics and a range of engineering disciplines, this book tackles the interdisciplinary challenges of the subject to introduce new thinking to important manufacturing problems. Presents AI concepts from the computer science field using language and examples designed to inspire engineering graduates Provides worked examples throughout to help readers fully engage with the methods described Includes concepts that are supported by definitions for key terms and chapter summaries
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Proceedings of IncoME V CEPE Net 2020 written by Dong Zhen and published by Springer Nature. This book was released on 2021-05-15 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of condition monitoring, plant maintenance and reliability, as presented by leading international researchers and engineers at the 5th International Conference on Maintenance Engineering and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network (IncoME-V & CEPE Net-2020), held in Zhuhai, China on October 23-25, 2020. Topics include vibro-acoustics monitoring, condition-based maintenance, sensing and instrumentation, machine health monitoring, maintenance auditing and organization, non-destructive testing, reliability, asset management, condition monitoring, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Advanced Condition Monitoring and Fault Diagnosis of Electric Machines written by Irfan, Muhammad and published by IGI Global. This book was released on 2018-09-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery.
