Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Process Modeling Simulation and Control for Chemical Engineers written by William L. Luyben and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1990 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to convey to undergraduate students an understanding of those areas of process control that all chemical engineers need to know. The presentation is concise, readable and restricted to only essential elements. The methods presented have been successfully applied in industry to solve real problems. Analysis of closedloop dynamics in the time, Laplace, frequency and sample-data domains are covered. Designing simple regulatory control systems for multivariable processes is discussed. The practical aspects of process control are presented sizing control valves, tuning controllers, developing control structures and considering interaction between plant design and control. Practical simple identification methods are covered.
Download or read book Process Modeling and Simulation for Chemical Engineers written by Simant R. Upreti and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the fundamental concepts and techniques involved in process modeling and simulation. The book allows the reader to: (i) Get a solid grasp of “under-the-hood” mathematical results (ii) Develop models of sophisticated processes (iii) Transform models to different geometries and domains as appropriate (iv) Utilize various model simplification techniques (v) Learn simple and effective computational methods for model simulation (vi) Intensify the effectiveness of their research Modeling and Simulation for Chemical Engineers: Theory and Practice begins with an introduction to the terminology of process modeling and simulation. Chapters 2 and 3 cover fundamental and constitutive relations, while Chapter 4 on model formulation builds on these relations. Chapters 5 and 6 introduce the advanced techniques of model transformation and simplification. Chapter 7 deals with model simulation, and the final chapter reviews important mathematical concepts. Presented in a methodical, systematic way, this book is suitable as a self-study guide or as a graduate reference, and includes examples, schematics and diagrams to enrich understanding. End of chapter problems with solutions and computer software available online at www.wiley.com/go/upreti/pms_for_chemical_engineers are designed to further stimulate readers to apply the newly learned concepts.
Download or read book Business Process Modeling Simulation and Design written by Manuel Laguna, Johan Marklund and published by Pearson Education India. This book was released on 2011 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business Process Modeling, Simulation and Design covers the design of business processes from a broad quantitative modeling perspective. The text presents a multitude of analytical tools that can be used to model, analyze, understand and ultimately, to design business processes. The range of topics in this text include graphical flowcharting tools, deterministic models for cycle time analysis and capacity decisions, analytical queuing methods, as well as the use of Data Envelopment Analysis (DEA) for benchmarking purposes. And a major portion of the book is devoted to simulation modeling using a state of the art discrete-event simulation package.
Download or read book Process Modelling and Simulation with Finite Element Methods written by William B. J. Zimmerman and published by World Scientific. This book was released on 2004 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic description and case studies of chemical engineering modelling and simulation based on the MATLAB/FEMLAB tools, in support of selected topics in undergraduate and postgraduate programmes that require numerical solution of complex balance equations (ordinary differential equations, partial differential equations, nonlinear equations, integro-differential equations). These systems arise naturally in analysis of transport phenomena, process systems, chemical reactions and chemical thermodynamics, and particle rate processes. Templates are given for modelling both state-of-the-art research topics (e.g. microfluidic networks, film drying, multiphase flow, population balance equations) and case studies of commonplace design calculations -- mixed phase reactor design, heat transfer, flowsheet analysis of unit operations, flash distillations, etc. The great strength of this book is that it makes modelling and simulating in the MATLAB/FEMLAB environment approachable to both the novice and the expert modeller.
Download or read book Process Modelling and Simulation in Chemical Biochemical and Environmental Engineering written by Ashok Kumar Verma and published by CRC Press. This book was released on 2014-10-17 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of simulation plays a vital part in developing an integrated approach to process design. By helping save time and money before the actual trial of a concept, this practice can assist with troubleshooting, design, control, revamping, and more. Process Modelling and Simulation in Chemical, Biochemical and Environmental Engineering explores ef
Download or read book Modeling and Simulation of Chemical Process Systems written by Nayef Ghasem and published by CRC Press. This book was released on 2018-11-08 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this textbook, the author teaches readers how to model and simulate a unit process operation through developing mathematical model equations, solving model equations manually, and comparing results with those simulated through software. It covers both lumped parameter systems and distributed parameter systems, as well as using MATLAB and Simulink to solve the system model equations for both. Simplified partial differential equations are solved using COMSOL, an effective tool to solve PDE, using the fine element method. This book includes end of chapter problems and worked examples, and summarizes reader goals at the beginning of each chapter.
Download or read book CHEMICAL PROCESS MODELLING AND COMPUTER SIMULATION written by AMIYA K. JANA and published by PHI Learning Pvt. Ltd.. This book was released on 2011-11-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and thoroughly revised text, now in its second edition, continues to present the fundamental concepts of how mathematical models of chemical processes are constructed and demonstrate their applications to the simulation of two of the very important chemical engineering systems: the chemical reactors and distillation systems. The book provides an integrated treatment of process description, mathematical modelling and dynamic simulation of realistic problems, using the robust process model approach and its simulation with efficient numerical techniques. Theoretical background materials on activity coefficient models, equation of state models, reaction kinetics, and numerical solution techniques—needed for the development of mathematical models—are also addressed in the book. The topics of discussion related to tanks, heat exchangers, chemical reactors (both continuous and batch), biochemical reactors (continuous and fed-batch), distillation columns (continuous and batch), equilibrium flash vaporizer, and refinery debutanizer column contain several worked-out examples and case studies to teach students how chemical processes can be measured and monitored using computer programming. The new edition includes two more chapters—Reactive Distillation Column and Vaporizing Exchangers—which will further strengthen the text. This book is designed for senior level undergraduate and first-year postgraduate level courses in “Chemical Process Modelling and Simulation”. The book will also be useful for students of petrochemical engineering, biotechnology, and biochemical engineering. It can serve as a guide for research scientists and practising engineers as well.
Download or read book Chemical Engineering Process Simulation written by Dominic Foo and published by Elsevier. This book was released on 2022-09-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Process Simulation, Second Edition guides users through chemical processes and unit operations using the main simulation software used in the industrial sector. The book helps predict the characteristics of a process using mathematical models and computer-aided process simulation tools, as well as how to model and simulate process performance before detailed process design takes place. Content coverage includes steady-state and dynamic simulation, process design, control and optimization. In addition, readers will learn about the simulation of natural gas, biochemical, wastewater treatment and batch processes. - Provides an updated and expanded new edition that contains 60-70% new content - Guides readers through chemical processes and unit operations using the primary simulation software used in the industrial sector - Covers the fundamentals of process simulation, theory and advanced applications - Includes case studies of various difficulty levels for practice and for applying developed skills - Features step-by-step guides to using UniSim Design, SuperPro Designer, Symmetry, Aspen HYSYS and Aspen Plus for process simulation novices
Download or read book Process Modeling Simulation and Environmental Applications in Chemical Engineering written by Bharat A. Bhanvase and published by CRC Press. This book was released on 2016-10-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable volume, new and original research on various topics on chemical engineering and technology is presented on modeling and simulation, material synthesis, wastewater treatment, analytical techniques, and microreactors. The research presented here can be applied to technology in food, paper and pulp, polymers, petrochemicals, surface coatings, oil technology aspects, among other uses. The book is divided into five sections: modeling and simulation environmental applications materials and applications processes and applications analytical methods Topics include: modeling and simulation of chemical processes process integration and intensification separation processes advances in unit operations and processes chemical reaction engineering fuel and energy advanced materials CFD and transport processes wastewater treatment The valuable research presented here will be of interest to researchers, scientists, industry practitioners, as well as upper-level students.
Download or read book Modeling and Simulation in Chemical Engineering written by Christo Boyadjiev and published by Springer Nature. This book was released on 2021-12-08 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical analysis of the modern methods used for modeling various chemical engineering processes. Currently, the two primary problems in the chemical industry are the optimal design of new devices and the optimal control of active processes. Both of these problems are often solved by developing new methods of modeling. These methods for modeling specific processes may be different, but in all cases, they bring the mathematical description closer to the real processes by using appropriate experimental data. In this book, the authors detail a new approach for the modeling of chemical processes in column apparatuses. Further, they describe the types of neural networks that have been shown to be effective in solving important chemical engineering problems. Readers are also presented with mathematical models of integrated bioethanol supply chains (IBSC) that achieve improved economic and environmental sustainability. The integration of energy and mass processes is one of the most powerful tools for creating sustainable and energy efficient production systems. This book defines the main approaches for the thermal integration of periodic processes, direct and indirect, and the recent integration of small-scale solar thermal dryers with phase change materials as energy accumulators. An exciting overview of new approaches for the modeling of chemical engineering processes, this book serves as a guide for the important innovations being made in theoretical chemical engineering.
Download or read book Process Control written by B. Wayne Bequette and published by Prentice Hall Professional. This book was released on 2003 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master process control hands on, through practical examples and MATLAB(R) simulations This is the first complete introduction to process control that fully integrates software tools--enabling professionals and students to master critical techniques hands on, through computer simulations based on the popular MATLAB environment. Process Control: Modeling, Design, and Simulation teaches the field's most important techniques, behaviors, and control problems through practical examples, supplemented by extensive exercises--with detailed derivations, relevant software files, and additional techniques available on a companion Web site. Coverage includes: Fundamentals of process control and instrumentation, including objectives, variables, and block diagrams Methodologies for developing dynamic models of chemical processes Dynamic behavior of linear systems: state space models, transfer function-based models, and more Feedback control; proportional, integral, and derivative (PID) controllers; and closed-loop stability analysis Frequency response analysis techniques for evaluating the robustness of control systems Improving control loop performance: internal model control (IMC), automatic tuning, gain scheduling, and enhancements to improve disturbance rejection Split-range, selective, and override strategies for switching among inputs or outputs Control loop interactions and multivariable controllers An introduction to model predictive control (MPC) Bequette walks step by step through the development of control instrumentation diagrams for an entire chemical process, reviewing common control strategies for individual unit operations, then discussing strategies for integrated systems. The book also includes 16 learning modules demonstrating how to use MATLAB and SIMULINK to solve several key control problems, ranging from robustness analyses to biochemical reactors, biomedical problems to multivariable control.
Download or read book Computational Methods for Process Simulation written by W. Fred Ramirez and published by Butterworth-Heinemann. This book was released on 1997-11-20 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Modelling and simulation have proved to be extremely successful engineering tools for the design and optimisation of physical, chemical and biochemical processes. The use of simulation has expanded rapidly over the last two decades because of the availability of large high-speed computers and indeed has become even more widespread with the rise of the desk-top PC resources now available to nearly every engineer and student. In the chemical industry large, realistic non-linear problems are routinely solved with the aid of computer simulation. This has a number of benefits, including easy assessment of the economic desirability of a project, convenient investigation of the effects of changes to system variables, and finally the introduction of mathematical rigour into the design process and inherent assumptions that may not have been there before. Computational Methods for Process Simulation develops the methods needed for the simulation of real processes to be found in the process industries. It also stresses the engineering fundamentals used in developing process models. Steady state and dynamic systems are considered, for both spatially lumped and spatially distributed problems. It develops analytical and numerical computational techniques for algebraic, ordinary and partial differential equations, and makes use of computer software routines that are widely available. Dedicated software examples are available via the internet. - Written for a compulsory course element in the US - Includes examples using software used in academia and industry - Software available via the Internet
Download or read book Modelling Simulation and Control of the Dyeing Process written by R. Shamey and published by Elsevier. This book was released on 2014-08-14 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increased environmental awareness and rising costs, manufacturers are investing in real time monitoring and control of dyeing to increase its efficiency and quality. This book reviews ways of automating the dyeing process as well as ways of understanding key processes in dyeing, including dye transport in fluid systems. This understanding is then used to create models to simulate the dyeing process which can then be used to develop appropriate measurement and control systems. Control of variables such as temperature, pH, conductivity and dye concentration can then be used to ensure a more consistent and cost-effective dyeing process. - Reviews the dyeing process and dye house automation, and the factors that affect dyeing quality and common difficulties in the process. - Explains the principles underlying the dyeing process and provides a thorough understanding of the mathematical models that can be used to approximate it. - Discusses techniques for monitoring dyebaths and controlling the dyeing process.
Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.
Download or read book Discrete Event Simulation written by George S. Fishman and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is an excellent and well-written text on discrete event simulation with a focus on applications in Operations Research. There is substantial attention to programming, output analysis, pseudo-random number generation and modelling and these sections are quite thorough. Methods are provided for generating pseudo-random numbers (including combining such streams) and for generating random numbers from most standard statistical distributions." --ISI Short Book Reviews, 22:2, August 2002
Download or read book Chemical Process Retrofitting and Revamping written by Gade Pandu Rangaiah and published by John Wiley & Sons. This book was released on 2016-01-29 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book will be divided into three parts. The chapters in Part I provide an overview of certain aspect of process retrofitting. The focus of Part II is on computational techniques for solving process retrofit problems. Finally, Part III addresses retrofit applications from diverse process industries. Some chapters in the book are contributed by practitioners whereas others are from academia. Hence, the book includes both new developments from research and also practical considerations. Many chapters include examples with realistic data. All these feature make the book useful to industrial engineers, researchers and students.
