Download or read book CMMI written by Mary Beth Chrissis and published by Addison-Wesley Professional. This book was released on 2007 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated revision of the best selling book on CMMI – now covering version 1.2.
Download or read book The Complete Guide to Mergers and Acquisitions written by Timothy J. Galpin and published by John Wiley & Sons. This book was released on 2010-12-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mergers and acquisitions (M&A) experts Tim Galpin and Mark Herndon present an updated and expanded guide to planning and managing the M&A process. This comprehensive book is unique in providing the tools to address both the human and operational sides of integration. Based on the authors' consulting experience with numerous Fortune 500 companies, this resource will help organizations capture deal synergies more quickly and effectively. Augmenting their step-by-step advice with helpful templates, checklists, graphs and tools, Galpin and Herndon provide sound guidance for successfully integrating different processes, organizations, and cultures. The authors also address pre-deal do’s and don’ts, people dynamics, common mistakes, communications strategies, and specific actions you can take to create measurable positive results throughout the integration process. The revised edition not only updates case studies and presents recent integration research, but it also adds new tools.
Download or read book Business Process Change written by Paul Harmon and published by Morgan Kaufmann. This book was released on 2014-04-26 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business Process Change, 3rd Edition provides a balanced view of the field of business process change. Bestselling author Paul Harmon offers concepts, methods, cases for all aspects and phases of successful business process improvement. Updated and added for this edition is new material on the development of business models and business process architecture development, on integrating decision management models and business rules, on service processes and on dynamic case management, and on integrating various approaches in a broad business process management approach. New to this edition: - How to develop business models and business process architecture - How to integrate decision management models and business rules - New material on service processes and on dynamic case management - Learn to integrate various approaches in a broad business process management approach - Extensive revision and update addresses Business Process Management Systems, and the integration of process redesign and Six Sigma - Learn how all the different process elements fit together in this best first book on business process, now completely updated - Tailor the presented methodology, which is based on best practices, to your organization's specific needs - Understand the human aspects of process redesign - Benefit from all new detailed case studies showing how these methods are implemented
Download or read book Process Intensification and Integration for Sustainable Design written by Dominic C. Y. Foo and published by John Wiley & Sons. This book was released on 2020-12-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents comprehensive coverage of process intensification and integration for sustainable design, along with fundamental techniques and experiences from the industry Drawing from fundamental techniques and recent industrial experiences, this book discusses the many developments in process intensification and integration and focuses on increasing sustainability via several overarching topics such as Sustainable Manufacturing, Energy Saving Technologies, and Resource Conservation and Pollution Prevention Techniques. Process Intensification and Integration for Sustainable Design starts discussions on: shale gas as an option for the production of chemicals and challenges for process intensification; the design and techno-economic analysis of separation units to handle feedstock variability in shale gas treatment; RO-PRO desalination; and techno-economic and environmental assessment of ultrathin polysulfone membranes for oxygen-enriched combustion. Next, it looks at process intensification of membrane-based systems for water, energy, and environment applications; the design of internally heat-integrated distillation column (HIDiC); and graphical analysis and integration of heat exchanger networks with heat pumps. Decomposition and implementation of large-scale interplant heat integration is covered, as is the synthesis of combined heat and mass exchange networks (CHAMENs) with renewables. The book also covers optimization strategies for integrating and intensifying housing complexes; a sustainable biomass conversion process assessment; and more. Covers the many advances and changes in process intensification and integration Provides side-by-side discussions of fundamental techniques and recent industrial experiences to guide practitioners in their own processes Presents comprehensive coverage of topics relevant, among others, to the process industry, biorefineries, and plant energy management Offers insightful analysis and integration of reactor and heat exchanger network Looks at optimization of integrated water and multi-regenerator membrane systems involving multi-contaminants Process Intensification and Integration for Sustainable Design is an ideal book for process engineers, chemical engineers, engineering scientists, engineering consultants, and chemists.
Download or read book Handbook of Process Integration PI written by Jiří Jaromír Klemeš and published by Woodhead Publishing. This book was released on 2022-11-09 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions, Second Edition provides an up-to-date guide on the latest PI research and applications. Since the first edition published, methodologies and sustainability targets have developed considerably. Each chapter has been fully updated, with six new chapters added in this release, covering emissions, transport, water scarcity, reliability and maintenance, environmental impact and circular economy. This version also now includes worked examples and simulations to deepen the reader’s understanding. With its distinguished editor and international team of expert contributors, this book is an important reference work for managers and researchers in all energy and sustainability industries, as well as academics and students in Energy, Chemical, Process, and Environmental Engineering. Provides a fully updated handbook with six new chapters that reflect the latest research and applications on process integration Reviews a wide range of process design and integration topics, ranging from heat and utility systems to water, recycling, waste and hydrogen systems Covers equipment design and operability issues, with a strong extension to environmental engineering and suitability issues
Download or read book CMMI for Development written by Mary Beth Chrissis and published by Pearson Education. This book was released on 2011-03-08 with total page 1247 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMMI® for Development (CMMI-DEV) describes best practices for the development and maintenance of products and services across their lifecycle. By integrating essential bodies of knowledge, CMMI-DEV provides a single, comprehensive framework for organizations to assess their development and maintenance processes and improve performance. Already widely adopted throughout the world for disciplined, high-quality engineering, CMMI-DEV Version 1.3 now accommodates other modern approaches as well, including the use of Agile methods, Lean Six Sigma, and architecture-centric development. CMMI® for Development, Third Edition, is the definitive reference for CMMI-DEV Version 1.3. The authors have revised their tips, hints, and cross-references, which appear in the margins of the book, to help you better understand, apply, and find information about the content of each process area. The book includes new and updated perspectives on CMMI-DEV in which people influential in the model’s creation, development, and transition share brief but valuable insights. It also features four new case studies and five contributed essays with practical advice for adopting and using CMMI-DEV. This book is an essential resource–whether you are new to CMMI-DEV or are familiar with an earlier version–if you need to know about, evaluate, or put the latest version of the model into practice. The book is divided into three parts. Part One offers the broad view of CMMI-DEV, beginning with basic concepts of process improvement. It introduces the process areas, their components, and their relationships to each other. It describes effective paths to the adoption and use of CMMI-DEV for process improvement and benchmarking, all illuminated with fresh case studies and helpful essays. Part Two, the bulk of the book, details the generic goals and practices and the twenty-two process areas now comprising CMMI-DEV. The process areas are organized alphabetically by acronym for easy reference. Each process area includes goals, best practices, and examples. Part Three contains several useful resources, including CMMI-DEV-related references, acronym definitions, a glossary of terms, and an index.
Download or read book Sustainable Design Through Process Integration written by Mahmoud M. El-Halwagi and published by Butterworth-Heinemann. This book was released on 2017-08-08 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Design through Process Integration: Fundamentals and Applications to Industrial Pollution Prevention, Resource Conservation, and Profitability Enhancement, Second Edition, is an important textbook that provides authoritative, comprehensive, and easy-to-follow coverage of the fundamental concepts and practical techniques on the use of process integration to maximize the efficiency and sustainability of industrial processes. The book is ideal for adoption in process design and sustainability courses. It is also a valuable guidebook to process, chemical, and environmental engineers who need to improve the design, operation, performance, and sustainability of industrial plants. The book covers pressing and high growth topics, including benchmarking process performance, identifying root causes of problems and opportunities for improvement, designing integrated solutions, enhancing profitability, conserving natural resources, and preventing pollution. Written by one of the world's foremost authorities on integrated process design and sustainability, the new edition contains new chapters and updated materials on various aspects of process integration and sustainable design. The new edition is also packed with numerous new examples and industrial applications. - Allows the reader to methodically develop rigorous targets that benchmark the performance of industrial processes then develop cost-effective implementations - Contains state-of-the-art process integration and improvement approaches and techniques including graphical, algebraic, and mathematical methods - Covers topics and applications that include profitability enhancement, mass and energy conservation, synthesis of innovative processes, retrofitting of existing systems, design and assessment of water, energy, and water-energy-nexus systems, and reconciliation of various sustainability objectives
Download or read book Business Process Integration with SAP ERP written by Simha Magal and published by . This book was released on 2013-10-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for use as both a reference guide and a conceptual resource for professionals working with and around SAP ERP. This material approaches real-world SAP topics using an integrated process perspective of the firm. Each process is discussed within the context of its execution across functional areas in the company. Professionals will gain a deep appreciation for the role of SAP ERP systems in efficiently managing processes from multiple functional perspectives. -- Foundational ERP concepts for end users & project teams -- Digital learning of core principles and techniques related to integrated business process execution -- Real-World examples of SAP ERP "in action" -- Self-Guided tutorials for critical SAP transactions in each process -- Definitions and contextual explanation of key terms and concepts in SAP ERP Table of Contents 1. Introduction to Business Processes 2. Introduction to Enterprise Systems 3. Introduction to Accounting 4. The Procurement Process 5. The Fulfillment Process 6. The Production Process 7. Inventory and Warehouse Management Processes 8. The Material Planning Process 9. Integrated End-to-End Processes 10. Global Bike Inc. Company History 11. Key Terms & Definitions
Download or read book Chemical Process written by Robin Smith and published by John Wiley & Sons. This book was released on 2005-06-10 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and integration of chemical processes, emphasizing the conceptual issues that are fundamental to the creation of the process. Chemical process design requires the selection of a series of processing steps and their integration to form a complete manufacturing system. The text emphasizes both the design and selection of the steps as individual operations and their integration. Also, the process will normally operate as part of an integrated manufacturing site consisting of a number of processes serviced by a common utility system. The design of utility systems has been dealt with in the text so that the interactions between processes and the utility system and interactions between different processes through the utility system can be exploited to maximize the performance of the site as a whole. Chemical processing should form part of a sustainable industrial activity. For chemical processing, this means that processes should use raw materials as efficiently as is economic and practicable, both to prevent the production of waste that can be environmentally harmful and to preserve the reserves of raw materials as much as possible. Processes should use as little energy as economic and practicable, both to prevent the build-up of carbon dioxide in the atmosphere from burning fossil fuels and to preserve reserves of fossil fuels. Water must also be consumed in sustainable quantities that do not cause deterioration in the quality of the water source and the long-term quantity of the reserves. Aqueous and atmospheric emissions must not be environmentally harmful, and solid waste to landfill must be avoided. Finally, all aspects of chemical processing must feature good health and safety practice. It is important for the designer to understand the limitations of the methods used in chemical process design. The best way to understand the limitations is to understand the derivations of the equations used and the assumptions on which the equations are based. Where practical, the derivation of the design equations has been included in the text. The book is intended to provide a practical guide to chemical process design and integration for undergraduate and postgraduate students of chemical engineering, practicing process designers and chemical engineers and applied chemists working in process development. Examples have been included throughout the text. Most of these examples do not require specialist software and can be performed on spreadsheet software. Finally, a number of exercises have been added at the end of each chapter to allow the reader to practice the calculation procedures.
Download or read book Software Change and Configuration Management A Complete Guide 2019 Edition written by Blokdyk, Gerardus and published by Emereo. This book was released on 2019-05-30 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: When doing a DR drill, have you found the run book to be out of sync with the current configuration? How many man-hours can be recovered through effective configuration management? Do you need a new release, version or patch level of the software? Is the service usage appropriate to capacity? Defining, designing, creating, and implementing a process to solve a challenge or meet an objective is the most valuable role… In EVERY group, company, organization and department. Unless you are talking a one-time, single-use project, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?' This Self-Assessment empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make Software Change and Configuration Management investments work better. This Software Change and Configuration Management All-Inclusive Self-Assessment enables You to be that person. All the tools you need to an in-depth Software Change and Configuration Management Self-Assessment. Featuring 965 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which Software Change and Configuration Management improvements can be made. In using the questions you will be better able to: - diagnose Software Change and Configuration Management projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices - implement evidence-based best practice strategies aligned with overall goals - integrate recent advances in Software Change and Configuration Management and process design strategies into practice according to best practice guidelines Using a Self-Assessment tool known as the Software Change and Configuration Management Scorecard, you will develop a clear picture of which Software Change and Configuration Management areas need attention. Your purchase includes access details to the Software Change and Configuration Management self-assessment dashboard download which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next. You will receive the following contents with New and Updated specific criteria: - The latest quick edition of the book in PDF - The latest complete edition of the book in PDF, which criteria correspond to the criteria in... - The Self-Assessment Excel Dashboard - Example pre-filled Self-Assessment Excel Dashboard to get familiar with results generation - In-depth and specific Software Change and Configuration Management Checklists - Project management checklists and templates to assist with implementation INCLUDES LIFETIME SELF ASSESSMENT UPDATES Every self assessment comes with Lifetime Updates and Lifetime Free Updated Books. Lifetime Updates is an industry-first feature which allows you to receive verified self assessment updates, ensuring you always have the most accurate information at your fingertips.
Download or read book Lean Integration written by John G. Schmidt and published by Pearson Education. This book was released on 2010-05-18 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use Lean Techniques to Integrate Enterprise Systems Faster, with Far Less Cost and Risk By some estimates, 40 percent of IT budgets are devoted to integration. However, most organizations still attack integration on a project-by-project basis, causing unnecessary expense, waste, risk, and delay. They struggle with integration “hairballs”: complex point-to-point information exchanges that are expensive to maintain, difficult to change, and unpredictable in operation. The solution is Lean Integration. This book demonstrates how to use proven “lean” techniques to take control over the entire integration process. John Schmidt and David Lyle show how to establish “integration factories” that leverage the powerful benefits of repeatability and continuous improvement across every integration project you undertake. Drawing on their immense experience, Schmidt and Lyle bring together best practices; solid management principles; and specific, measurable actions for streamlining integration development and maintenance. Whether you’re an IT manager, project leader, architect, analyst, or developer, this book will help you systematically improve the way you integrate—adding value that is both substantial and sustainable. Coverage includes Treating integration as a business strategy and implementing management disciplines that systematically address its people, process, policy, and technology dimensions Providing maximum business flexibility and supporting rapid change without compromising stability, quality, control, or efficiency Applying improvements incrementally without “Boiling the Ocean” Automating processes so you can deliver IT solutions faster–while avoiding the pitfalls of automation Building in both data and integration quality up front, rather than inspecting quality in later More than a dozen in-depth case studies that show how real organizations are applying Lean Integration practices and the lessons they’ve learned Visit integrationfactory.com for additional resources, including more case studies, best practices, templates, software demos, and reference links, plus a direct connection to lean integration practitioners worldwide.
Download or read book System Integration written by Jeffrey O. Grady and published by CRC Press. This book was released on 2020-07-24 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Integration presents the systems approach to complex problem solving and provides a powerful base for both product and process integration. This unique reference describes 27 kinds of integration work, primarily obtained through human communications. Simple computer applications-already in place in most companies-have the resources to encourage the availability and sharing of current team knowledge, which results in an intense, cooperative experience leading rapidly to sound design solutions.
Download or read book Mergers Acquisitions Integration Handbook written by Scott C. Whitaker and published by John Wiley & Sons. This book was released on 2012-05-22 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proven strategies and tactics to manage the integration of acquired and/or merged companies Mergers & Acquisitions Integration Handbook is a comprehensive resource to help companies create a scalable post merger or acquisition integration process and framework that accelerates operating and business benefit goal realization. Includes tools, templates, forms, examples and checklists to provide a no nonsense “handbook” style approach to managing an effective integration. Helps integration managers quickly get up to speed on various integration challenges, including guidance on developing detailed operational and functional integration plans to support flawless execution. Reveals how to avoid integration failure by establishing an in-house integration management office to handle integration projects. Includes a sample integration playbook that can be used to create a core competency within companies to support ongoing integration activity. Botched integration is the number one reason mergers fail. Mergers & Acquisitions Integration Handbook shows you how to develop, execute and implement merger integrations and business strategies to realize your organization's mergers and acquisitions goals.
Download or read book Enterprise Integration Patterns written by Gregor Hohpe and published by . This book was released on 2003 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book M A Integration written by Danny A. Davis and published by John Wiley & Sons. This book was released on 2012-09-14 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most firms of a certain size will turn to Mergers & Acquisitions in their search for growth, forcing almost all managers to face up to the challenge of integration at some point in their career. For many managers it is often their first and only time, and M&A integration is high on the list of things that many managers need to learn more about. According to many studies, 50 to 75% M&A transactions fail to deliver their expected value. One of the main reasons for failure is late or wrong integration, or bad integration management. There is a significant demand for more information on best practice in Post-Merger Integration. This book intends to equip those managers for the task... Danny A. Davis demonstrates how to handle the post-merger integration process and show how to restructure, consolidate, reduce costs, create efficiencies and perform M&A, from smaller transactions to mega-mergers. The focus is on integration planning and delivery. The book combines a general/strategic view with detailed information on how to actually conduct M&A Integration via very practical tools and check lists that will prove essential during pre-deal M&A integration planning and Post deal delivery, as well as to ensure their success.
Download or read book Demand and Supply Integration written by Mark A. Moon and published by FT Press. This book was released on 2013-01-14 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply chain professionals: master pioneering techniques for integrating demand and supply, and create demand forecasts that are far more accurate and useful! In Demand and Supply Integration, Dr. Mark Moon presents the specific design characteristics of a world-class demand forecasting management process, showing how to effectively integrate demand forecasting within a comprehensive Demand and Supply Integration (DSI) process. Writing for supply chain professionals in any business, government agency, or military procurement organization, Moon explains what DSI is, how it differs from approaches such as SandOP, and how to recognize the symptoms of failures to sufficiently integrate demand and supply. He outlines the key characteristics of successful DSI implementations, shows how to approach Demand Forecasting as a management process, and guides you through understanding, selecting, and applying the best available qualitative and quantitative forecasting techniques. You'll learn how to thoroughly reflect market intelligence in your forecasts; measure your forecasting performance; implement state-of-the-art demand forecasting systems; manage Demand Reviews, and much more. For wide audiences of supply chain, logistics, and operations management professionals at all levels, from analyst and manager to Director, Vice President, and Chief Supply Chain Officer; and for researchers and graduate students in the field.
Download or read book Pinch Analysis and Process Integration written by Ian C. Kemp and published by Elsevier. This book was released on 2011-04-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pinch analysis and related techniques are the key to design of inherently energy-efficient plants. This book shows engineers how to understand and optimize energy use in their processes, whether large or small. Energy savings go straight to the bottom line as increased profit, as well as reducing emissions. This is the key guide to process integration for both experienced and newly qualified engineers, as well as academics and students. It begins with an introduction to the main concepts of pinch analysis, the calculation of energy targets for a given process, the pinch temperature and the golden rules of pinch-based design to meet energy targets. The book shows how to extract the stream data necessary for a pinch analysis and describes the targeting process in depth. Other essential details include the design of heat exchanger networks, hot and cold utility systems, CHP (combined heat and power), refrigeration and optimization of system operating conditions. Many tips and techniques for practical application are covered, supported by several detailed case studies and other examples covering a wide range of industries, including buildings and other non-process situations. - The only dedicated pinch analysis and process integration guide, fully revised and expanded supported by free downloadable energy targeting software - The perfect guide and reference for chemical process, food and biochemical engineers, plant engineers and professionals concerned with energy optimisation, including building designers - Covers the practical analysis of both new and existing systems, with ful details of industrial applications and case studies
